An updated VT Series ergonomic vacuum lifter from Anver Corp. (Hudson, MA) has a stronger and more secure handlebar, plus a proprietary lifting tube and tube attachment system. The Anver VT Tube Lifter features a handlebar that secures at six points (front, center, and rear) for rigidity, and is fully adjustable to let operators tailor it to their own requirements.
Combilift (Greensboro, NC) has introduced new designs and a new 33E model in the Aisle-Master range of articulated forklifts. By replacing a combination of reach and counterbalance trucks with a very narrow aisle operating Aisle-Master, storage capacity can be doubled, according to the company.
Grundfos Pumps (Olathe, KS) has released the CR(N)-H and CRNE-H stainless steel horizontal end suction pumps, which were designed to be used in a variety of applications, including washing and cleaning, paper industries, and more. According to the company, the CR(N)-H can bolt directly to the piping and pump case footprint of a traditional ANSI pump.
Lincoln Electric (Cleveland, OH) has introduced a new Stem and Wood Reel Dispensing System, which was designed for larger wire sizes from 1/16” to 3/16” in diameter. The system allows for accurate wire placement when using large diameter wire, and is compatible with up to 2,200-pound bulk stems.
Columbia Machines (Vancouver, WA) has further developed the Load Transfer Station (LTS) product line to include a Pallet Cart (LTS-C), which allows the fork truck driver to place the “go to” pallet onto a pallet cart allowing the process to complete automatically. The LTS-C is capable of transferring products that are packaged in cases, barrels, drums, bags, and pails from one pallet type to another.
The System One centrifugal pumps from Blackmer (Grand Rapids, MI) are designed for high-volume, severe-duty applications. The System One has a stiffer heavy-duty shaft and larger bearings, which means that operators can expect improved mean time between failures for reduced maintenance costs.
The NLB (Wixom, MI) 605 Series of water jet pump units now give users a combination of ultra-high pressure and high horsepower in a rugged unit that can be converted to a variety of operating pressures. The range has been expanded to include eight operating pressures from 4,000 to 40,000 psi, with engines of up to 600 hp.
Genie (Redmond, WA), a Terex brand, is launching a new series of 69”-wide rough terrain scissor lifts, which includes three new models: GS™-2669 RT, GS™-3369 RT and GS™-4069 RT. According to the company, the redesign has increased capacity and improved jobsite performance.
MISUMI USA, Inc. (Schaumburg, IL) has announced a significant expansion in its Sanitary Pipes and accessories product category. The expanded line provides engineers with a greater range of options when selecting fluid and air handling system components. The MISUMI offerings now number more than 100, many of which are configurable to user specifications.
Yale Materials Handling Corporation (Greenville, NC) has unveiled its next generation of electric lift trucks with the ECR-VA series. The new trucks have lifting capacities of 3,000 to 4,000 pounds, plus AC motors and transistor controller technology for both the traction and hydraulic systems, which reduces the frequency and cost of maintenance.
Air Technical Industries (Mentor, OH) has announced the development of the Telescopic Mast Straddle Crane, which is a mobile solution that is compact and can carry a variety of loads up to 50,000 pounds. According to the company, it can lift the load up to 120” high for loading, unloading, or transporting heavy loads from one plant bay to another.
Colson Caster Corporation (Jonesboro, AK) has introduced two new caster lines to serve lighter-duty markets. The first two sets of its new low-cost casters include the L Series for light duty and the G Series for more general applications. The L Series offer a 150-pound capacity and come in 2-5” wheel diameters.
Master Magnetics (Castle Rock, CO) now offers Neodymium Lifting Magnets, which are ideal for handling steel plate, forgings, die casting, and similar items in machine shops, warehouses, and industrial processing plants. Lift magnets eliminate the need for slings or clamping devices and allow one person to do the work of two or more.
A new portable, variable-speed electric double diaphragm pump — available from EDSON (New Bedford, MA) — is rated for 25 GPM service in a variety of industrial applications. The EDSON Model 2500 electric-powered double diaphragm plastic pump can transfer liquids with solids up to 1” diameter, with low emulsion and no shear.
Spacesaver Industrial (Fort Atkinson, WI) has introduced the ActivRAC Mobilized Storage, which is a full-line of space-saving storage systems that give manufacturers the ability to increase their capacity without having to expand existing facilities. With ActivRAC Mobilized Storage, fixed rows of pallet racking are mounted on carriages and mobilized.
iwis (Indianapolis, IN) has introduced anti-backbend chains, which are only flexible in one direction, for pushing loads and transmitting forces without the need for a guidance system. The chains are suitable for transmitting tensile and compressive forces, and perform a similar function as linear drives, eliminating the need for an endless, circulating chain drive.
The SMARTON crane system is designed for optimum flexibility and reliability in challenging environments, with a compact design that allows industrial halls to be smaller than before. Konecranes (Springfield, OH) has developed the cranes with capacities from 160 to 500 tons, which makes them ideal for automotive and general manufacturing, automatic storage systems, workshops, and more.
The RingDex, from Dispense Works (McHenry, IL), is an affordable filling system with a unique modular design that can improve previously manual and tedious filling/capping operations. The RingDex allows quick changeovers for low- to medium-volume protection with a removable indexing ring and quick-release tooling to accommodate different size bottles, vials, caps, tips, etc.
The Moyno (Springfield, OH) 2000 Model G3 Progressing Cavity Pump is suited for handling semi-dry, high-solids content or caked substances. By positioning the pump above the auger feed, the bridge breaker device prevents the accumulation of material in the throat of the pump. In addition, this bridge breaker is independently-driven for flexibility in controlling the pump and breaker, which helps meet specific application requirements.
Material Transfer (Allegan, MI) has developed the Sanitary Stainless Steel Hydraulic Container Dumper, which discharges containers of food products into an existing hopper at 63” above floor level. The unit has a sanitary, wash-down duty, tubular 304 stainless steel construction with continuous TIG welds, and no tube penetrations.
Establishing and following good engineering practices, and being prepared to handle spills, are two key elements of a successful Spill Prevention Control and Countermeasure (SPCC) Plan.
The new P-433 Ship Shape Biohazard bulk container from Meese Orbitron Dunne Co. (Ashtabulta, OH) has earned the UN 11H2 design qualification documenting its ability to safely transport hazardous materials. The container is developed for handling clinical waste, oil- and paint-soaked shop rags, and flammable solid materials due to its rugged, rigid plastic container with a seal-tight plastic cover.
The FLA 1650 AGV, from Amerden, Inc. (Augustine, FL), provides a flexible material handling link between production lines and warehousing. They have produced the following video to demonstrate their product in use: To learn more, visit www.amerden.
The recently-introduced line of CABLEflow Tubular Cable Drag Conveyors from Spiroflow Systems (Charlotte, NC) are designed for applications requiring gentle handling and conveying both to and from multiple points in a circuit. They can transfer friable bulk products from single or multiple in-feed points to single or multiple discharge points with little or no damage.
NuStar, Inc. (Shakopee, MN) has developed the new Super Power Pusher, which is a pedestrian-operated, battery-powered pusher with a new handle. It can push, pull, and maneuver almost any heavy industrial load, and can use a range of attachments for handling rolling loads up to 150,000 pounds.