The failure happened Nov. 19, 2011, as the 884-megawatt coal-fired plant near Becker was being returned to service following a maintenance outage. The malfunction caused extensive damage to the unit's steam turbine and generator.
The fouling of heat exchangers in processing industries is a chronic operating problem. Costs...
Bird control leader, Bird-X, joins the GSA Advantage program to bring pest bird control...
The most important part of a hydraulic system is keeping it clean. Any extreme pressure...
The pilots of a Boeing 787 that left Houston bound for Denver circled back to Houston after a mechanical problem. It's the third time in the past week that a flight involving Boeing's newest plane was cut short for a mechanical reason. A United Airlines spokeswoman said Monday that Flight 94 returned to Houston shortly after takeoff on Sunday because of "a brake indicator issue."
Union members have ratified a six-year labor contract at Caterpillar Inc.'s plant in South Milwaukee. The new contract freezes wages and pensions but includes a $4,000 signing bonus and shortens temporary layoffs. Caterpillar says the Peoria, Ill.-based company is pleased to have reached what it believes is "a fair, reasonable and comprehensive agreement."
Much of the world's electronic waste ends up in Guiyu, China, where old parts are recycled but chemicals like mercury leak into the water. Cell phones arrive in this town by the truckloads, where locals are experts in sorting through the electronic trash.
Many industrial facilities such as petrochemical plants must remain safely, efficiently operational with virtually no downtime, unplanned maintenance, or replacement for decades. To protect equipment from corrosion, traditionally three separate coatings are used, often in a zinc, epoxy, urethane combination. While this is common, it is far from optimal.
In this issue, BMW Manufacturing reports record production volume, NEUTEX Advanced Energy Groups positions itself as a leading American manufacturer of LED lighting, industry experts talk the true value of anti-seize, manufacturers and distributors step up to tackle the skill gap in welding, and more.
The air transport industry has been through many economic dips during the past four decades, yet it has always bounced back quickly with travel demand higher than ever. However, the increasing volatility of aviation fuel prices has a significant impact on airline operating costs and profitability.
A technician holds a wand to the major piping connections of the air conditioner and waits for a device to alarm if a leak is detected. The technician is not looking for the level of refrigerant along the automotive assembly line, he is looking for whether the refrigerant is leaking from any fitting at a rate greater than preset tolerable limits and trying to locate where the leak is.
The mission of CAGI (Compressed Air and Gas Institute) is to be the united voice of the compressed air industry, serving as the unbiased authority on technical, educational, promotional, and other matters that affect the industry. IMPO recently spoke with Rick Stasyshan, CAGI’s Technical Consultant, about ways the organization can help manufacturers become safer and more efficient users of this resource.
A cake mix supplier has 12 hours to fill a 15,000-bag production order for a new customer. during the seventh hour, the filling machine shuts down with no warning. the machine operator attempts to troubleshoot and diagnose the problem but is unable to do so.
Is your floor surface in need of some TLC? There are a bevy of options, but ultimately, it’s important to remember that there’s money underfoot. When it comes to industrial flooring surfaces, there are many vendors out there who will insist their solution is best. One thing they can all agree on, however, is that an industrial floor is not often just a “set it and forget it” investment.
Industrial inspection cameras have revolutionized the predictive maintenance industry. From the many types of cameras available, thermal imagers are ones that have claimed their place in a manufacturer’s predictive maintenance arsenal. Once an instrument too expensive for the average facility, today’s technology has advanced thermal imagers to the point of necessity.
The right industrial lubricant can help a manufacturer increase equipment reliability, reduce operating costs, and extend machine life. Choosing the correct lubricant is “the most fundamental component of a successful preventive maintenance program,” says Polanek. “Today’s successful companies view preventive maintenance and high-performance lubricants as investments to help ensure long-term success.”
When the bore on the rigid half of a high-torque steel mill coupling was badly galled during a maintenance teardown, the mill put the damaged part in the plant’s bone yard. However, engineers at Kop-Flex® developed a clever solution that saved the customer almost half the cost to replace the $112,000 part, which transmits approximately 10,000,000 pound inches of torque to a roughing stand.
In this issue, Pennsylvania manufacturers highlight a "new industrial revolution," machine tags and contamination control eliminate errors and improve industrial lubricant performance, experts discuss proper loading dock design and the safety and energy efficiency concerns that have long dogged facility dock areas, and more.
Since the inception of the first industrial electric motors, manufacturers have been developing technology to produce better motors which use the least amount of energy possible. While perhaps increasing the efficiency of electric motors is not a relatively new phenomenon, the last several decades of technological advancements in motors, as well as manufacturing methods, has vastly improved the efficiency of electric motors.
Most manufacturing and distribution warehouses rely on conveyor systems to keep their daily operations running. Fortunately, well-trained operators and maintenance technicians can reduce the risk of conveyor downtime by executing a preventive maintenance plan. In addition to avoiding the stress of missed shipment deadlines and lost profits, preventive maintenance keeps conveyors running at peak efficiency.
Find ways to save money through investing in energy efficient equipment and alternative energy solutions here!
Just like in any manufacturing facility, employees’ hands get dirty and require frequent washing with abrasive products, which can cause irritation. Because of the chemicals involved, many of these products can also be less-environmentally friendly. The challenge for Hawes, Wolseley project manager, was to find a cost-effective and more sustainable way to clean workers’ hands.
In this issue, industrial matting solutions address various safety concerns within a plant, WhiteWave Foods' Horizon Organic facility showcases creative maintenance solutions, adhesives eliminate clostly and potentially hazardous UV sources, the 2012 IMPOvation award winners are announced, and more.
It’s easy to see the benefit of undertaking the effort to implement an MES system. They effectively collect, process, and translate valuable business data related to the plant floor and the enterprise resource planning system. But the adoption process can be fraught with risk and uncertainty, depending on the approach a manufacturer takes.
What exactly is cable management? It seems to mean many different things, and different products. Like many terms used today, cable management has become a “catch all” reference that often entails the perspective of the person using the term. This makes cable management even more important, and increasingly more challenging to address.
As product safety and traceability become a more critical factor in a wide range of industries, engineers are more and more often faced with the challenge of reading multiple codes on a single product. There are a wide variety of multiple code reading applications, including multiple codes of the same symbology within a single field of view and multiple codes in multiple fields of view.
Doppler and transit time are two very popular types of flow meters for non-invasive measurement of flow in full pipes. They are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. But they actually work best in opposite applications and success in your installation depends on understanding the differences and making the right choice.
The Boeing Co. said Wednesday that it has been awarded a $2 billion contract from the Defense Department to help the Air Force maintain its fleet of 246 C-17 cargo planes. Boeing said that the contract includes ensuring that spare parts are available for the planes as well as maintenance on the aircraft.
Fall is around the corner, which means weather will begin to cool, and the outdoors will become less hospitable for humans and animals alike. As you begin to welcome the start of autumn, keep an eye out for pests that may be aiming to make your facility their home for the next several months.
- Page 1