The SZ Acoustic Curtain Walls from Zoneworks (Milwaukee, WI) can make reducing excessive noise within an industrial facility easy and affordable. The walls reduce noise levels inside buildings by up to 22-25 decibels, making a space approximately four times quieter than it would be without them.
The HEPC Series of emergency power controls from High-Lites (Wallingford, CT) adapt locally switched lighting fixtures for operation during power interruptions, with a design that bypasses the local switch. HEPC power controls also save energy by eliminate the need for night-light circuits.
Kaba Access Control (Winston-Salem, NC) announces that its E-Plex 5800 Series FIPS 201 Locks and Stand-Alone Access Controllers (SAC) are now the only standalone products that are GSA-approved. The E-Plex 5800 series offers multiple levels of security based on their access control needs, and works with TWIC, PIV, CAC NG, FRAC, and other FIPS 201 interoperable credentials.
The PSENopt safety light curtains and light barriers from Pilz Automation Safety (Canton, MI) are optoelectronic protection devices that safeguard danger zones whenever a production process requires active yet safe access. The PSENopt curtains offer a muting function — total or partial — that is directly integrated, as is monitoring of the muting lamps.
The VAF-Series ventilators from Americ (Elk Grove Village, IL) are designed for confined space applications. They are manufactured from durable, high-density polyethylene plastic, making them extremely lightweight and portable. Handles are located centrally for balanced maneuverability, and anti-skid rubber feet keep the ventilator in once place.
Space-Ray (Charlotte, NC) has expanded its line of energy-efficient, low intensity gas-fired U-tube heaters to 21 different models, with capacities from 40,000 to 250,000 BTU/hour. The heaters are ideal for high air change environments and higher ceiling heights, such as machine or weld shops, maintenance facilities, and more.
The ENERGY GUARD from Serco (Carrollton, TX) provides a perimeter seal along the sides and rear hinge of a dock leveler to block dirt, debris, and insects, and most importantly, prevent energy loss. The design seals the gaps between the dock leveler and concrete pit walls up to 9” above the dock.
The new CM25 self-contained, ceiling-mounted air conditioner from MovinCool (Long Beach, CA) offers a high cooling capacity at a lower cost than conventional solutions, such as precision cooling systems. The CM25 was designed specifically for spaces with dense heat loads and small spaces, at only 20” high.
Continental Fan (Buffalo, NY) announces the TEK Plug Fans, which feature TEK backward curved airfoil wheels. The TEK Impellers combine precision injection molding techniques with modern high-strength plastics to produce a wheel that is stronger than steel, yet half the weight.
Master Magnetics, Inc. (Castle Rock, CO) has introduced a few additions to their line of magnetic sweepers. The permanent magnet assemblies range from 12” to 96” in width, making them ideal for quick removal of hazardous scrap metal debris from warehouses, loading docks, and manufacturing areas.
Allegro (Garden Grove, CA) has manufactured the Manhole Ventilation Passthru (MVP), which is designed to maintain and redirect air flow, with minimal restrictions, into manholes, sewers, and tanks. The MVP combines three components—a low-profile air vent, 90° elbow, and built-in mounting—all in one unit.
Thybar Corporation (Addison, IL) now offers the Retro-Curb, an insulated roof curb that allows for unrestricted positioning on standing seam roof systems. The curb has a flat, pre-punched base flange that can be cut out to allow perfect alignment with the seams on the roof, and they are custom designed to accommodate any roof slope.
Cooper Lighting (Peachtree City, GA) offers the HBI High-Bay Industrial Fluorescent Series, which features an optic that has been optimized to provide maximum performance from T8 lamps. The high lumen package allows the benefits of fluorescent to be applied at high mounting heights that were traditionally exclusive to HID lamps.
Stanley Vidmar (Allentown, PA) has relaunched its vertical lift product, now called the Vidmar Vertical. The automated storage and retrieval system that can manage up to 132,000 lbs of material from the convenience of one computer console. According to the company, use of vertical space is a simple way to save up to 75 percent of a facility’s floor space.
Shat-R-Shield (Salisbury, NC) has recently added the T5 High-Output and High Intensity Discharge lamps to their safety-coated lighting products. The new T5HO fluorescent lamp offers an output of 5,000 lumens in a slim-profile lamp, at only 54 watts. They feature low mercury and are TLCP-compliant, in addition to a 30,000 hour rated lifespan to help reduce maintenance and recycling costs.
The Knuffi Soft-Edged Bumper Guards from Independent Warehouse Inc. (IWI; Sparks, NV) were designed to address safety issues in the workplace, and feature a highly visible black and yellow striped covering to warn of danger or restricted access. Knuffi guards can function as protection for covering indoor and outdoor wall edges, doorways, and stair edges.
The EcoPolyBlend spill control pallets from Justrite Mfg. (Des Plaines, IL) are an eco-friendly solution that protects against groundwater contamination to meet EPA standards. In addition, the pallets are made of 100 percent recycled polyethylene, so they support other green initiatives as well.
A new line of BIU Utility Fans from Continental Fan (Buffalo, NY) are offered in thirteen sizes, ranging from 10” to 36”. The Utility Fans feature heavy gauge, rugged welded steel construction in either Class I or II construction. They come with either backward inclined or B1 airfoil wheels, depending on size selected.
Sun Technologies (Blomfield Hills, MI) has developed the Mini Floor & Pallet, which is a 2’ x 4’ x 2’ Polypropylene riser platform. The pallet holds up to 1,000 pounds, yet weighs only 8.5 pounds. In addition, the sections can be connected by the length or the width with clips, which are included.
The Hybrid Systems from Shure (Washington, MO) can be customized to numerous configurations according to customer specification, with increased under-bench storage, making them ideal for an existing facility in need of remodeling. The workbench systems are offered in 4’, 5’, 6’, 8’, and 10’ lengths to accommodate different configurations.
Sioux Corporation (Beresford, SD) has introduced the new E-Series All-Electric line of pressure washers and steam cleaner, with a compact, portable, and 100 percent all-electric design. According to the company, the E-Series is ideal for cleaning, disinfecting, material handling equipment, and more, in a variety of industrial applications.
The Vibro-Curb from the Thybar Corporation (Addition, IL) has integral vibration-dampening spring isolators for mounting with rooftop HVAC units, allowing roofing to be completed after HVAC installation without disturbing the unit. In addition, the 9” counter-flashing provides a weather seal while permitting easy access to the isolators, which provide a minimum of 90 percent isolation efficiency.
The Filtered Diffuser from Comfort First Products (Santa Ana, CA) is designed to eliminate drafts from overhead diffusers and reduce the illness and allergies caused by ductwork pollution. The diffuser allows users to adjust the angle the air enters the room on all four sides, helping to eliminate drafts or hot and cold spots.
Delta Industrial (Chesterfield, MI) has a range of mezzanine systems designed for both large and small facilities, making them ideal for in-plant offices, storage, industrial platforms, catwalks, and conveyor integration. Features of Delta’s mezzanine systems include: Customer-designed specifications.
Delamo Manufacturing, Inc. (Los Angeles, CA) has introduced the DYNAMO trash can, available in 32 and 44 gallon sizes. The DYNAMO is the first plastic trash can to offer built-in storage for a variety of cleaning tools, including brooms, mops, dust pans, and more. Flexible belts are available to secure the can liner to the top of the can, along with a number of optional extras, such as the DYNAMO dolly.