Misumi USA, Inc. (Schaumburg, IL) has introduced a new line of Factory Frame Systems, meant to provide a configurable and cost-effective option for creating a wide array of temporary and permanent storage units. The Factory Frame system allows users to design, configure, and assemble units to meet their exact application requirements.
DeWalt (Towson, MD) has launched two new Dust Extraction Systems (D25302DH and D25301D) for cordless and corded DeWalt SDS rotary hammers (in 7/8” and 1”), which completes their line of dust extraction solutions. The cordless system with a HEPA filter (the D25302DH) for 36-volt and 28-volt SDS rotary hammers is equipped with a built-in motor, delivering increased suction and high tool performance, according to the company.
ZONEWORKS (Milwaukee, WI) has developed three-dimensional environmental containment enclosures, which are custom-designed and modular to cost-effectively address challenging environmental conditions virtually anywhere within an industrial plant. The enclosures allow users to control temperature, heat, humidity, sound, odor, dust, fumes, and other elements to protect employees or products.
Chloride Systems (Burgaw, NC) has developed the Max-Lite Series of emergency lighting products, which are ideal for locations where oil-, water-, and dust-resistant equipment are required. The lights are certified to NSF Standard 2 Splash Zone, and are UL-listed for use in damp and wet locations in temperatures ranging from 0° to 40°C.
Direct Metals Company, LLC (Kennesaw, GA) adds its Hardware Cloth as a compliment to its wiremesh product line, with either woven or welded wires in a square or rectangular grid. The Hardware Cloth is available in plain steel, hot dipped galvanized, aluminum, stainless steel, or with a PVC coating.
The LIQUID-HARD ULTRA lithium concrete densifier and chemical hardener from W.R. Meadows (Hampshire, IL) is a ready-to-use, colorless liquid, which dustproofs concrete at a molecular level, according to the company. The finished surface offers an improvement in abrasion and chemical resistance and will improve the durability the surface compared to untreated concrete.
The AMI Motorized Axial Fans from Continental Fan (Buffalo, NY) are suited to applications where space is limited due to the coupling of the motor and impeller, which also provides for vibration-free operation. The AMI fans are speed controllable, and both the motor and impeller are located directly in the air stream, where the impeller acts as a rotating “heat sink.
STOKO Skin Care (Greensboro, NC) offers a variety of ethanol-based hand sanitizers for use when typical hand-and-soap washing is not possible or feasible, such as in industrial environments. The Gel Instant Hand Sanitizer provides rapid germ-killing activity when hand-washing facilities are not readily available.
Allegro Industries (Garden Grove, CA) offers new products in ergonomic protection, including back and wrist supports, kneepads, and elbow supports for specific jobs. The wrist supports, including the Dual-Flex and Maxrist offerings, feature the all-around comfort and support of Neoprene.
Wildeck, Inc. (Waukesha, WI) has added two Laddergard Safety Swing Gates that protect personnel at potentially dangerous openings, including loading dock ladders, mezzanine ladders, rooftop access ladders, and more. The safety swing gates are self-closing and meet OSHA 1910.
The Workman Personal Fall Limiter from MSA (Pittsburgh, PA) is made from a lightweight yet durable thermoplastic housing, plus rugged, impact-absorbing protective bumpers. A choice of cable or web lifelines are available, not to mention a multitude of connector choices. The Workman PFL is made to be durable and easy to use, according to the manufacturer, and has a 400-pound working capacity, no annual recertification requirement, and an integral load indicator.
The new Elevation Station adjustable-height workstation from Southworth Products Corp. (Portland, ME) allows the user to raise or lower the tabletop, reducing fatigue and back strain. The unit features a foot pedal at each end of the base to initiate a smooth, precise transition to any height between 24” to 40”.
Thybar (Addison, IL) introduces the Retro-mate, a cost-effective method of replacing rooftop HVACs. The old unit is removed, and then the Retro-mate is installed on top of the existing curb to adapt it to the new rooftop unit. Existing ductwork can be utilized for even more savings, according to the manufacturer.
Custom Service & Design, Inc. (Auburn Mills, MI) offers a line of filtration products and solutions through its standard vessel line, which includes standard bags, pleated bags, stainless steel strainers, baskets, and elements. The OEM/07A Bag Vessel design is unique to the company, and offers good fluid flow and low velocities, not to mention a basket seat that ensures a proper fit for virtually any industry-standard filter bag.
The High Volume Low Speed (HVLS) fans from Kelley Company (Carrollton, TX) can move a large column of air slowly, creating a horizontal floor jet that consistently circulates air in large spaces. This allows facilities to raise thermostats in the summer without sacrificing worker comfort, and can help contribute to LEED Certification credits.
CASS Polymers (Oklahoma City, OK) offer the PolyMax Industrial Plant Floor Systems, which are able to withstand extreme temperature changes and thermal shock, with a similar coefficient of expansion compared to concrete. The system is available in slip-resistant profile for wet environments, and is installed in 3/16” or greater thicknesses.
Wireway Husky Corp. (Denver, NC) has developed a modular, welded wire partition system that is easy to install in a wide range of storage and machinery applications. The EZ-Matrix Wire Partition System features an 8-gauge 2” square welded wire mesh modular construction.
HEMCO (Independence, MO) now offers the Emergency Shower Booth for compliance with OSHA requirements. The unit is capable of immediately drenching personnel that have been exposed to hazardous chemicals, and is ideal for industrial environments. The unit is equipped with a pull rod activated shower and push handle eye/face wash for quick rinsing of the eyes, face, and body.
The LS Industrial Fans from AIRLANCO (Falls City, NE) can handle heavy-duty dust loads or coarse materials safely and efficiently with convenient service access. The fans can serve as components in dust collection or cyclone systems, and range from 1,000 to 100,000 cfm.
General Equipment Company (Owatonna, MN) introduces the EP20ACP Downforce Convection Blower intended for a variety of applications, such as drying damp environments, keeping personnel cool, or diluting contaminated air. The multi-bladed propeller draws warm, dry air from above and forces it downward at a high velocity, drying wet surfaces along the way.
Zoneworks (Milwaukee, WI) now offers insulated pallet covers to maintain product temperatures at any point throughout the supply chain. The covers are custom-designed with advanced materials and flexible structure that helps maintain the proper temperature of heated or cooled palletized products.
Lista International Corporation (Holliston, MA) has developed its durable Mobile MRO Workstations, which feature high-density storage cabinets on wheels. The stations can be easily maneuvered to bring parts, tools, supplies, and equipment directly to job sites, saving time and increasing productivity.
Kelley Company (Carrollton, TX) has launched a new High Volume Low Speed (HVLS) Fan series, designed to provide facilities with an energy-efficient and cost-effective cooling and heating solution. The fans create a horizontal floor jet that consistently circulates air in large spaces, which provides an 8-10 degree cooling sensation.
The Interna-Rail handrail system from Hollaender Manufacturing (Cincinnati, OH) is an in-line fitting based system designed to combine the look of a welded rail with all the benefits of a mechanical system. The system can be designed to meet any building code. Its fittings are manufactured from 6063-T6 aluminum alloy and the pipe is a combination of 6005-T5 and 6063-T6 alloys.
Shure Manufacturing (Washington, MO) offers new Recycle Cabinets, which have a large swing-out door to reveal a 40-gallon plastic receptacle with dolly for recyclable materials. The steel door can be closed to conceal unsightly containers, making the customer’s service area look clean and organized, while helping the environment.