The Emergency Shower Decontamination Booth from HEMCO Corp. (Independence, MO) complies with ANSI and OSHA requirements, and is made from one piece of seamless chemical-resistant fiberglass. The shower comes equipped with a pull rod-activated shower and push handle eye/face wash for quick rinsing of eyes, face, and body.
Albeo Technologies, Inc. (Boulder, CO) is introducing the H-Series LED high bay for general illumination. The lights are modular and deliver more than 50,000 lumens at 100 lm/W due to a cast aluminum structure, conservative currents, and highly-engineered heat dissipation, according to the company.
VAC-U-MAX (Belleville, NJ) is introducing a streamlined website design that allows buyers of industrial vacuum cleaners to research the best vacuum for their application by category and industry. Some of the major applications include fine powders, liquid recovery, and flammable liquid recovery.
The DUOTHERM heat recovery system from Boge America, Inc. (Powder Springs, GA) is an ideal solution for compressed air users wanting to optimize the energy usage of their existing compressed air system through heat recovery, according to the company. The heat recovery system can recover up to 94 percent of the input energy used in compression in the form of heat.
The Witte Co. (Washington, NJ) has developed clean, Lexan belt drive guards for its fluid bed dryers, coolers, screeners, conveyors, and other vibratory equipment. The guards fully enclose the belt drive system to prevent contact with the drive belt, promote worker safety, and aid compliance with OSHA requirements.
The Garland Company, Inc. (Cleveland, OH) has announced upgrades to its R-Mer Edge fascia and coping systems for low-slope roofing, which is the first line of defense against high winds, says the company. The systems are certified to conform to ANSI/SPRI ES-1, which formalizes the International Building Code (IBC) specifications for resistance to wind-related failures.
The Total Package Enclosure System from Thermal Edge (Irving, TX) now includes the UL-listed enclosure and enclosure air conditioner, back panel, and all holes for mounting. The company’s air conditioners are available in 120V, 230V and 480V, and come in NEMA Types 12, 4, and 4X. Condensate evaporation, a digital controller, and a narrow design are standard on every system.
Phoenix Products Company, Inc. (Milwaukee, WI) is now selling the Phoenix FLEX LED docklite, which provides light comparable to an incandescent dock light with a 150W PAR38 lamp. The FLEX LED is designed for the general illumination of a truck trailer. The LEDs have an average rated lift of 50,000 hours and a 12° beam angle, plus they operate on only 16W, which offers an 84 percent energy savings over a 150W incandescent dock light.
Spacesaver Industrial (Fort Atkinson, WI) has introduced ActivRAC Mobilized Storage, a full line of space-saving storage system that gives manufacturers the ability to increase capacity without having to expand existing facilities. With the ActivRAC system, otherwise stationary rows of pallet racking are mounted on carriages and mobilized.
The PC7 portable spot air conditioner from MovinCool (Long Beach, CA) now has an expanded cooling capacity of 9,000 Btu/h, an almost 30 percent increase over the previous version. According to the company, this is made possible by a more efficient design, which provides greater airflow over both the evaporator and condenser.
Bearing Distributors, Inc. (BDI; Cleveland, OH) has announced the acquisition of Salt Lake City, UL-based PneumaTrek National Inc. PneumaTrek will offer pneumatics, hydraulics systems, and fluid power components to businesses in the Salt Lake City market and surrounding area since 1975. According to BDI, the acquisition will combine PneumaTrek’s local market expertise with BDI’s global footprint, supplier/partner relationships, and resources.
Lyon Workspace Products (Aurora, IL) has announced the new Essential Solutions Catalog, which is a 65-page overview of the company’s best-selling storage, locker, and workspace solutions. The full-color catalog features all-welded storage cabinets, lockers, workstations, ergonomic seating, shop furniture, tool storage, modular drawer cabinets, shelving, and storage racks.
Hammond Manufacturing Company Inc. (Cheektowaga, NY) is now offering its Eclipse Junior (EJ Series) enclosure in 316 grade stainless steel, which offers increased corrosion resistance, making the units suitable for installation in areas with aggressive chemicals. They are designed for use as instrument enclosures, electrical, hydraulic, or pneumatic control housings, electrical junction boxes, or terminal wiring enclosures.
Atlas Sales & Rentals, Inc. (Torrance, CA) is now offering a portable dehumidifier that offers high water removal capacity in a portable unit, for both low and high humidity settings. The DA 3500i dehumidifier removes 170 pints at AHAM* (80°F / 60% RH) while drawing only 10.5 amps, making it ideal for challenging drying applications.
Kooltronic, Inc. (Pennington, NJ) has announced additions to its 480V Panel Mounted Air Conditioners, which were designed to cool the interior of electrical enclosures. The new models have expanded the capacity to 5,000 to 26,000 BTU-H, and are now available in either NEMA 4 or 4X in 480V configurations.
AmeriPride (Minneapolis, MN) has announced the Bulwark Excel FR ComforTouch Premium Coveralls, which are intended to resist ignition and prevent the spread of flame in areas where intermittent exposure to flame or heat is possible. They have an arc rating (ATPV) of 8.6 calories/cm², which allows them to meet NFPA 70E standards for hazard/risk category (HRC) 2 applications.
Cooper Crouse-Hinds (Syracuse, NY) announced the introduction of its Vaporgard LED Series as a direct LED replacement for incandescent bulbs in industrial or hazardous applications. According to the company, these LEDs have 20 percent longer life than incandescent lamps, and reduce energy consumption by 85 percent.
MovinCool (Long Beach, CA) has developed a video to highlight the features and benefits of their CM Series ceiling-mounted packaged air conditioners.
Establishing and following good engineering practices, and being prepared to handle spills, are two key elements of a successful Spill Prevention Control and Countermeasure (SPCC) Plan.
The TPU-SD duct with steel wire helix — from Novaflex (Richmond Hill, Ontario, Canada) — is now manufactured using raw materials to meet FDA requirements for food contact applications when used in accordance with the limitations of 21 CFR: 175.105 and 177.2600a. The specially-formulated grade of urethane also maintains the TPU-SD duct’s ability for permanent protection against electrostatic discharge.
New Pig Corporation (Tipton, PA) has introduced the PIG Oil-Only Absorbent Mat with Color Flare Technology, which is specifically designed to change color to reveal light-colored oil leaks. The outer spunbond layer contains oil-indicating wax dots, which dissolve in oil to release dye. This process “flares” bright blue to provide a clear visual indication that mineral oil or hydraulic fluid is leaking.
WAGO Corporation (Germantown, WI) has developed the CPO Series DIN-rail Mount Outlet Boxes to provide control cabinets with power for common tools, including laptops and testing equipment. The CPO Series utilizes a UL 498 Receptacle, which is ideal for UL 508 panels. In addition, the PVC housing measures just 60mm by 109mm and features an ABS plastic cover.
DeWalt (Towson, MD) has announced the launch of four new jobsite work standings, including the Heavy Duty Miter Saw Stand (DWX723), the Compact Miter Saw Stand (DWX724), the Heavy Duty Work Stand (DWX725), and the Heavy Duty Work Stand with Miter Saw Mounting Brackets (DWX725B). All four of the miter saw stands feature screw-attached, non-marring polymer feet that are secure and won’t mark flooring surfaces.
Custom-designed, OSHA-compliant safety nets from Carron Net Company (Two Rivers, WI) can help protect workers from falling objects, and reduce costly product damage. According to the company, the nets are cost-effective and easy-to-install to protect pallet racks, conveyors, mezzanines, and floor-stacked loads from loads up to 5,000 pounds.
HEMCO (Independence, MO) has announced the UniMax Floor Mount Fume Hood, which comes in sizes from 6’ to 24’ wide, 4’ to 8’ deep, and 7’ to 16’ high. According to the company, tall apparatus or long, integrated instrumentation systems can be easily accommodated into the hoods, which are constructed of chemical-resistant, non-conductive modular panels in a composite resin material.