Creform Corporation (Greer, SC) has built the Extreme Size Car—which can be manufactured in virtually any size—to meet needs in large parts handling. The parts feature an elevated load platform with a solid plastic shelf surface to provide for damage-free handling of sensitive parts.
Time Mark (Tulsa, OK) announces their new Model 42X Pump Expansion Unit, which can control up to 3 pumps with a 4-20mA input. Alarm inputs for seal failure, over-temp, contactor fail, and a spare (a second seal fail, for example) are available. Configuration for the 42X is completed via a PC through a USB cable, and the software shows current depth, pump status with run time meters, and alarm status.
A new flow conditioner from Westfall Manufacturing (Bristol, RI), the Model 3000, has been designed to achieve a fully-developed velocity profile with minimal head loss (K=0.579). The Model 3000 mounts directly into a piping system and features four leading tabs and four anti-swirl plates that suppress turbulence to produce a developed velocity profile within eight diameters downstream.
Advanced Machine & Engineering Co. (Rockford, IL) now offers Sitema Safety Catchers from Sitema GmbH, which are clamping devices that mount around shafts to support vertical loads. The catches help decelerate and stop falling loads, preventing personal injury or damage to equipment.
The Demag DC-Pro Chain Hoist from Demag Cranes & Components (Cleveland, OH) has an extended service life of up to 1,900 hours, which results in increased time between service intervals and general overhauls. Many components are maintenance-free for up to 10 years, helping lower operating costs.
The Prolite polypropylene tubing from NewAge Industries (Southampton, PA) is made from a NSF-61 (National Sanitation Foundation) semi-rigid compound, and can be used in food processing, chemical lines, dispensing equipment, compressed air, and more. Features of the Prolite tubing include: Chemical and corrosion resistance, and a low moisture absorption.
Air Technical Industries (ATI, Mentor, OH) announces the Reversible Boom Crane operation with wireless remote or pendant control that offers safety and flexibility in lifting, handling, and transporting heavy loads in most narrow passageways. The unit can be remotely controlled for all functions, including propulsion, speed acceleration or deceleration, steering, mast rotation, and more.
R&M Materials Handling, Inc. (Springfield, OH) has released the NRGmaster, an alternative to C-track festoons. The NRGmaster system eliminates dangling cables and provides a sleek design, increasing hook coverage on the shop floor and decreasing common C-track festoon maintenance pitfalls.
Wildeck, Inc. (Waukesha, WI) introduces the new V-Lift, a hydraulically-operated, cantilever material lift that can be installed either in a shaftway or free-standing, with optional structural framing. The V-Lift is designed to meet ANSI/ASME B20.1 standards for conveyors, and features a hydraulic ram with large 2-1/2” diameter dual pistons to deliver a smooth lifting motion.
Dispense Works, Inc. (McHenry, IL) has introduced an RC conveyorized system to automatically filll aluminum molds with six different colors of vinyl (Plastisol). The system includes the slip roller conveyor with quick-adjust rails to accommodate pallets of different sizes.
The HV8000 mechanical booster pumps from Edwards Vacuum (Tewsbury, MA) replace steam ejectors on a chemical vapor infiltration (CVI) process, which is used in the matrix deposition process of manufacturing high-temperature materials, and using a mechanical booster can significantly lower manufacturing costs, according to the company.
TMI ’s (Pittsburgh, PA) new EZ-Riser trailer stand is used to prevent trailers from up-ending when they are not connected to tractor trailers during loading and unloading. The EZ-Riser is a heavy-duty, ergonomically-designed stand that features a gas-activated leveling system and an automatic height adjustment.
The Cleveland Vibrator Co. (Cleveland, OH) has expanded its line of acetal body (CVT-P-10 and stanless steel (CVT-S-10) miniature turbine vibrators with the new Turbomite CVT-P-22. Constructed with acetal plastic and stainless steel exterior parts with laser etching, the CVT-P-22 is ideal for cleanroom environments, and is FDA- and USDA-compliant.
The SafeHold EPL Series Permanent Lifting Magnets from Eriez (Erie, PA) help lift and transfer steel or iron without slings, hooks, or cables, and without marring the surface. The lifting magnets require fewer operators and helpers, and when properly installed, provide greater safety than traditional material handling devices.
The 100 percent metal-free DrumQuik PUR chemical dispensing system from Colder Products Company (St. Paul, MN) provides safe and economic extraction of high-purity chemicals from drums, jerry cans, and intermediate bulk containers. The system is composed of two components: a PVDF coupler and a HDPE drum insert assembly, which contains a bung closure and dip-tube.
Kin-Tek Laboratories, Inc. (Marque, TX) announces the 491M-PB Module, which is used with 491M Modular Gas Standards Generators to maintain steady gas pressures within the unit and balance backpressure to the delivery system pressure. At trace concentrations (PPM, PPB, and PPT) of reactive gases, surface absorption within the transport system can significantly affect the actual mixture delivered.
GoatThroat Pumps (New York, NY) announces their SCP-6500 pump, which allows containers holding flammable liquids to be grounded, which makes them safe for use with Class 1 and 2 flammables. All components of the new pump which come in contact with the fluid are created with conductive plastic so that the system remains grounded.
The new MARTIN Carryback Capture System from Martin Engineering (Neponset, IL) is a scavenger conveyor system that transfers belt cleaning residue back into the material stream, avoiding cleanup labor and injuries. The design helps prevent material accumulation that can impede conveyor components and increase system downtime.
The Tite-Space BST AGV Tugger from Creform Corporation (Greer, SC) is well suited for delivering to line-side assembly points when space is at a premium. With a minimum turning radius of 400mm, the Tite-Space slips easily into tight spots. Additional features include: A low-profile, sleek design with drive motor, 24 Volt DC power supply, and guidance sensors.
The Style 177 QuickVic Flexible Coupling from Victaulic (Easton, PA) offers a flame-free pipe joining solution that reduces installation time and cost. The new coupling is an extension of the patented installation-ready line, and with no loose parts and no requirement to disassemble before installation, this line provides a competitive edge.
The B-Series Belt Skimmer line from Zebra Skimmers Corp. (Cleveland, OH) has been expanded to include a wider belt for heavier oil load applications for customers with large surface area sumps or central tank applications. Additional features include: A rugged, heavy-duty steel construction.
Rollprint Packaging Products Inc. (Addison, IL) announces the launch of a high-performance, 100 percent polyester lidding alternative for medical, pharmaceutical, and food processing applications. The SteamOne uses are much as 50 percent less material and helps companies meet recycling objectives.
The new NF600 self-priming diaphragm pump from KNF (Trenton, NJ) has been designed for dosing or transferring liquids and incorporates a four-diaphragm technology to promote smoother and continuous flow, quiet-running performance, and maximized efficiency, according to the company.
The FMA-4100/4300 series flow rate meter from Omega Engineering (Stamford, CT) can display 23 different volumetric flow or mass flow engineering units, including a user-specific selection. The flowmeters support a programmable flow totalizer in addition to high- and low-flow alarms.
A&H Engineering and Manufacturing, Inc. (Cerritos, CA) now offers the Shop Lift as an ergonomic solution to the problem of heavy material handling in a confined space. The Shop Lift is designed to carry up to 600 lbs. and deliver the load safety. With a gross weight of 700 lbs.