Grieve (Round Lake, IL) has developed the No. 961, which is an electrically-heated, 350°F vertical conveyor, which can be used for preheating baskets of steel parts. The unit has 4” insulated walls and an aluminized steel interior and exterior, and comes with a removeable top-mounted heat chamber, plus a motor-operated vertical lift door.
The universal dolly, designed to carry both pad- and pole-mounted transformers, from Tiiger, Inc. (Mt. Juliet, TN) uses a unique three-wheel design to provide a stable load platform that can be easily repositioned for loading and unloading. The high-yield steel construction and low-pressure turf tires allow the system to carry transformers up to 1,000 pounds.
Columbus McKinnon Corporation (CMCO — Amherst, NY) announces the launch of a new line of wire rope hoists in capacities from 25 to 50 tons. The core of the Yale Global Max HC is a double-girder style, which contains numerous features that set it apart from other hoists. The external hoist motor helps optimize cooling by preventing heat transfer in either direction, and allows for easy maintenance.
Southworth Products (Portland, ME) has redesigned its Dandy Lift line of lifter/transporters for a higher level of convenience and comfort to make work faster and safer. The hydraulic systems offer infinite height adjustment, with a 20:1 mechanical advantage. Seven models are available with a range of capacities (330 to 1,760 pounds), lifting heights (29” to 49.
Moyno, Inc. (Springfield, OH) has developed the Moyno L-Frame Progressing Cavity Pump for handling clean, thin, shear-sensitive products to viscous, corrosive, abrasive slurries, and sludges. According to the company, they are built for dependable performance and maximum operating efficiency.
The new and improved Super Power Pusher from NuStar, Inc. (Shakopee, MN) is a pedestrian-operated, battery-powered pusher that has the ability to push, pull, and maneuver industrial loads up to 150,000 pounds. The system eliminates forklifts or other more expensive ride-on equipment, increasing productivity and creating a safer work environment by keeping the load under control.
The Revvo Caster Company, Inc. (West Seneca, NY) has announced its upgraded Flexello TLCH Series floor locks, designed to provide a means of instantly securing a truck or other mobile equipment without raising it. The new TLCH features a longer and wider engagement pedal so the unit is safer and easier to lock into position.
igus (East Providence, RI) has developed a compact cable carrier system that can turn through 3,000 degrees in a minimal space: the TwisterBand TB30. The system guides energy, data, and media with little wear, and at high rotating speeds, the carrier stays close to the axis. According to igus, the carrier is designed for one and a half complete rotations, coupled with high dynamics.
A fully powered C-frame style vacuum upender 180° flipper from Anver Corp. (Hudson, MA) lets one person lift, inspect, and reposition wood, plastic, and composite sheets. The Upender allows operators to place sheets and panels in jigs for assembly or secondary operations with eight double spring-loaded vacuum suction pads to assure even loading and stress-free handling.
Southworth Products (Portland, ME) has designed its Dandy Lift line of lifter/transporters for more convenience and comfort to make work faster, safer, and easier. The hydraulic systems in the Dandy Lifts offer infinite height adjustment (within range) and a 20:1 mechanical advantage. In addition, they are available in seven models with a wide range of capacities (330 to 1,760 pounds) and lifting heights (29” to 49.
The Parker Hannifin Corporation (Marysville, OH) announces the PV360, a new addition to the PV plus axial pistol pump family. The PV360 is a variable displacement, 360 cc/rev pump, which can handle industrial applications with operating pressures to 5,000 psi. According to the company, the PV360 is best suited for cranes and lifting equipment, presses, metal forming machines, hydraulic power units (HPUs), and more.
Morse Manufacturing Co., Inc. (East Syracuse, NY) has developed the Clamp+GO! drum dolly handle, which clamps onto dollies with various-sized sidewalls, making it ideal for any drum handling operation. A low center of gravity helps operators maneuver the drum with stability, helping to prevent accidents, and moving to the next dolly only requires a quick touch.
The InSight Ultra Clear Bins from Akro-Mils (Akron, OH) are made from autoclavable polycarbonate material and are available in four sizes to provide maximum visibility to users in a sleek design. The InSight bins’ “lock-in-place” design allows bins to be stacked, even with lids in place, and the molded rear hanger lip easily hooks the bins onto rails or louvered panels.
Knaack LLC (Crystal Lake, IL) Jobsite storage products are now manufactured using a new powder paint process, which now offers improved corrosion resistance, abrasion resistance, scratch resistant, and paint film thickness. According to the company, corrosion resistance is now five times better than the company’s previous liquid enamel paint, and abrasion resistance is 2.
igus (East Providence, RI) is offering an energy tube for the machine-tool industry that is nearly 100 percent chip-proof, according to the company. The RX energy tube ensures debris simply falls off due to its smooth domed outer contour. In addition, internal testing has confirmed that the energy tube is nearly 100 percent airtight.
Spirax Sarco, Inc. (Blythewood, SC) released its control valve range, SPIRA-TROL, in 6” and 8” sizes and with more control options. Thanks to a “clamp in seat” design, the valves are easy to maintain and do not require any special tooling, according to the company. In addition, a number of options have been added to ensure the valve can be optimized for the specific requirements of a customer application.
Material Transfer & Storage, Inc. (Allegan, MI) has developed a new system that utilizes hydraulically-actuated pivoting conditioning arms and a rotary lift table to safely and efficiently return solidified materials to a free-flowing state. The system’s frames penetrate deeply into the material for a more effective operation, and the lift table rotates and positions the bulk bag for material conditioning.
BinMaster (Lincoln, NE) Level Controls has introduced a series of extended rotaries for top-of-bin mounting when the rotary is used as a high level alarm. For certain applications, BinMaster can custom-manufacture extended rotaries, offering custom lengths up to 144”. These systems help allow users to maintain a certain amount of headroom when filling a bin with solid materials.
The Lubrizol Corporation (Cleveland, OH) offers a more durable, corrosion-resistant piping alternative with its Corzan HP pipe and fittings, which have a 25 percent higher pressure rating than standard CPVC at 180°F. The fittings are pressure-rated to the same pressure as the pipe. In addition, the Corzan HP fitting compound has also been tested to verify performance, and it has demonstrated improved creep resistance and the ability to better withstand long-term, high-temperature hydrostatic pressure.
Apex Industrial (Mason, OH) has announced its SkyHook industrial vending machine, which makes it easier to vend MRO products of irregular shapes and sizes. According to the company, any product with a hang-tab or hole punch can be vended in this system, without repackaging. The system is installed by plugging it into a power outlet and connecting it to the Internet, which allows real-time usage, inventory, and restocking information.
Pro-Fit Carry Systems (Puyallup, WA) now offers their “one-stop-shop” for tool organization: the Modular Zippered Tech Bag with a removable shoulder strap. The lightweight nylon pouch provides pockets for small tools, and includes three modular Velcro tool panels, which can be easily inserted or removed.
Geerpres, Inc. (Muskegon, MI) has introduced a new high-capacity, powder-coated cart that blends the most beneficial features of stainless steel and modular plastic carts. The “Hybrid” High-Capacity Cart features a powder-coated metal construction and a center divided cabinet that includes locking and non-locking compartments.
A below-the-hook vacuum lifter and power tilter from Anver Corp. (Hudson, MA) uses a dry pump vacuum system rather than hydraulics for lifting steel, plastic, and fiberglass loads. The system is available with a 115 VAC electric or pneumatic actuator for the tilt mechanism. Developed for feeding machinery, the lifter has a removable pendant control for up/down and powered tilt, can be rotated manually, and includes a locking pin.
Deciding on a rental company is difficult. You want a place that has reliable equipment, but also knows how to serve their customers. That’s where Net Promoter Score (NPS) comes in. NPS helps determine which company consistently meets customer needs and has the most loyalty
The King Cobra Series Peristaltic Pumps from Wilden (Grand Terrace, CA) feature a simple, seal-free design that is dry-run capable and eliminates potential leak points. According to the company, this construction allows the pumps to handle a variety of fluids, from abrasives to viscous or particle-laden solutions.