Located at booth #8937 during MODEX 2014, PFI will demonstrate how working with them to increase operational efficiency and lower operating costs can mean big gains for your business.
Located at booth #8527 during MODEX 2014, Spacesaver Industrial will showcase a new interactive app that helps visitors visualize their storage potential.
Model 86-SS is another option in Morse's safety-conscious line of hoist attachments.
Toyota Europe expects to sell 865,000 units this year and increase its market share to 4.8 percent as the European car market enters what is expected to be a slow recovery from six years of contraction.
Plant and warehouse managers may have to add “Air Traffic Controller” to their list of job duties in the near future. That’s because companies are working on new ways to use drones in the material handling field.
The requirement to pinch-off and hermetically seal ductile metal tabulation (tubing) is a critical and necessary process when separating a device from a vacuum pumping station. Tools that can reliably perform the pinch-off (cold weld) function will produce a reliable seal that can withstand bake-out temperatures up to 600o C and eliminates the necessity of using expensive valves to perform the same process.
Dürr Ecoclean released its EcoCCore system for solvent-based part cleaning.
To address coming workforce demographic changes, employers must create a corporate culture that promotes both safety and wellness. Healthy workers and a safe workspace reduce costs and increase productivity, so these efforts will be repaid fully.
From repetitive motion to lifting risks, the warehouse presents many challenges to personnel safety. Repetitive motion of any type, when sustained, can result in injury, says the president of Hamilton Caster. “Manufacturers can help reduce injuries by providing equipment that eliminates risky motions, such as reaching too far to position products for transit, and by observing best ergonomic practices for working height.
The median age of the labor force is anticipated to increase rapidly, with one-third of the U.S. labor force turning 55 by 2015. This may have far-reaching implications on the number and type of work-related injuries experienced. Most companies are not prepared for these changing demographics.
When management needed to reduce the footprint of Richmond's remanufacturing operations to make room for other revenue generating actives, the stockroom was faced with a 60 percent reduction in floor space. The stockroom already had a floor to ceiling man up narrow aisle picking system and there was little floor space and no additional shelf space that could be squeezed out.
New features in pallets and racking, including better material composition, more secure racks, and better accessibility are making today’s industrial pallet and racking solutions safer and more cost effective than ever before. In this ever changing world of material handling, manufacturers are doing everything they can to choose wisely, stay efficient, and incorporate safety.
The ALL Erection & Crane Rental Corp. is proud to announce the appointment of Brenton MacDonald as Safety Supervisor of Central Rent-A-Crane, a member of the ALL Family of Companies. In addition to overseeing safety training and implementation of safety programs for Central Rent-A-Crane’s three Indiana locations, MacDonald is also Central’s HSSE Supervisor at the BP Whiting Refinery. The appointment is effective immediately.
In the manufacturing arena, four out of five materials handling injuries affect the back and require a median of ten days for workers to recuperate. A strain can have indirect costs in excess of $33K and requires an additional $672K in sales to recoup those costs. Anytime organizations can eliminate the possibility of back injuries, injury costs should be taken into consideration when determining ROI.
Workplace injuries in any organization take a bite out of profits. The statistics regarding the number of injuries and illnesses that occur on the job and purported annual costs of $250B is astronomical. In the goods producing industry, which accounts for account for 35 percent of all occupational illness and injury cases, “manual materials handling is the principal source of compensable injuries,” according to OSHA.
Asset management, at its core, is all about profitability. If a manufacturer can gain a clear picture of how and where assets are being used, they can account for overuse, underuse, lost items, bottlenecks, theft, and more. And in doing so, there is an endless list of tools to consider.
Pat and Bill Lancaster believed that pallet loads of product could be better protected — that billions of dollars of unsalable product due to shipping damage could be reclaimed and energy spent recycling, repurposing, or disposing of this damaged product could be regained. Pallet loads could be better stabilized and product should be — and could be — better protected in transit.
Ergonomics can be thought of as much like a dinner table setting: Everything should be in easy reach and no one should have to reach too far or stretch into an unnatural position to get at what they need, says Ed Metzger, president of BioFit. “By ensuring that workers have the freedom to move comfortably and naturally, companies can prevent many of the musculoskeletal injuries and fatigue that leads to lost time and productivity.”
Lear Corporation’s 94,000-square-foot, four assembly line seating plant in Montgomery, AL is one of the most modern and efficient facilities of its kind. At peak production, Lear builds approximately 1,000 seat sets per day or 73 sets per hour in 56 distinct combinations of colors and options for the Hyundai Sonata sedan and Santa Fe SUV built at Hyundai’s Alabama plant.
Corwin Will is the facility manager of The Pampered Chef, a Berkshire Hathaway company, which has benefited from tremendous savings and safety improvements from installing Minit Chargers across four warehouses. The Pampered Chef warehouses face a daily challenge similar to those of all industrial facilities: trying to pick and ship thousands of items a day in the most efficient way possible.
The GW- 4100 robotic pallet wrapper boasts speeds of 37 loads/hr and comes standard with a telescoping mast that allows for easy mobility, accommodating loads up to 6 feet, 11 inches.
The drawbridge shelf cart that is ideally suited for protecting and delivering totes, containers, or unpackaged parts from warehouse to sequential operations in production, says the company.
COFE, Continuous Order Fulfillment Enterprise, processes orders within a distribution center using a demand driven waveless approach, says the company.
At 8 KHz high frequency, the ZAPI controller provides smooth and quiet operation along with protection from low and high voltage, overheating, and fault recording.