HYDROM delivers constant electrolyte quality to ensure constant gap for better quality and superior process stability, says the company.
The SLC Series Seal-less Eccentric Disc Pump safely transfers and contains isocyanates thanks to its design that requires no magnets, no mechanical seals, or packing, says the company.
Kindorf® Universal Cone Nuts install without springs, reducing installation time and eliminating the chance of jamming in strut slots, says the company.
No. 885 is a 1400 degree F electric, inert atmosphere tempering furnace used for heat treating weldments at a customer’s facility.
LU™214 Food Grade Low Temperature Lubricant is a multi-service lubricant for extended service under extremely low temperature conditions (as low as -78 degrees F).
The 135 foot (41 meter) boom has been redesigned, with improvements in reliability, performance, operator features, and serviceability.
Key features include a square face to thread precision, for better bearing reliability and compressor efficiency; and a lock screw adjustment that does not reduce end clearance or negatively impact reliability, says the company.
These RoHS compliant shoulder screws are cost-saving construction components for a wide variety of uses.
The latest in the DCmind offering includes the TNi21 and SMi21 brushless motors featuring integrated electronics, power capabilities from 60 to 150 Watts, and high accuracy, says the company.
TOUGH GARD Anti-Spatter Liquid is a ready-to-use, water-soluble, and biodegradable product that helps prolong the life of consumables, reducing the downtime and cost to change over nozzles, contact tips, and retaining heads, explains the company.
The 2000 WA and WB models are ideal for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is desired.
This tool allows the technician to “hear” even the smallest compressed air, natural gas, propane tank, vacuum, steam, and other pressurized leaks, says the company, before they lead to major breakdowns.
The DEFENDER® antimicrobial cable jacket eliminates greater than 99 percent of bacteria (e.g. E. Coli, Salmonella) and fungus (e.g. Aspergillus) within 24 hours of exposure, according to the company.
The new Power Swap System enables the company’s NB Series Mobile Powered Workstations to operate 24 hours a day with no break for recharging, says the company.
Featuring four 72 watt 395 nanometer UV LED light heads, the ultra-flexible WALCD-4X24LED-UV portable ultraviolet LED light stand enables operators to position high intensity UV light on product surfaces to cure a wide variety of coatings.
The new VAL-MS-T1/T2 lightning arresters offer a higher level of surge protection in an affordable package. The arresters are rated for Type 1 lightning strike events with a measured 10/350 µs test current (Iimp) of 12.5 kA or Type 2 surge events with a measured 8/20 µs maximum discharge surge current (Imax) of 50 kA.
Designed to exceed the brightness of a 150-watt halogen bulb while reducing energy consumption by approximately 50 percent, the new LuxPro illuminator offers optimal thermal management to maximize reliability and optical performance, says the company.
The AML-LED-WP40-M Mechanics LED Work Light produces high output illumination comparable to metal halide fixtures, yet is smaller, cooler running, and more versatile, according to the company.
The heavy duty connectors are designed to maintain reliable electrical connections while providing protection against dirt, moisture, and mechanical stress common in industrial environments.
The Dockmaster™ LED loading dock light is the current titleholder of the brightest and most reliable LED dock light in the Americas, according to the company.
The new wrench provides added power and leverage, as well as a jaw capacity up to three inches.
Multi-Material drill bits will drill through just about any type of material out there, including brick, block, tile, metal, wood, laminate, plastic, and marble – they'll even drill through multiple materials at the same time, says the company.
ESD-Safe Cutters and Pliers are ergonomically designed, made from highly alloyed steel, and feature static dissipative hand grips and Light-Touch™ return springs, says the company.
Spra-Rite lubrication systems precisely regulate the volume and placement of lubricant at specific areas of stamping or drawing tools, or the stock, at predetermined press stroke intervals, explains the company.