The MH052 pipe sealant from Permabond Engineering Adhesives (Somerset, NJ) has BAM approval for use in oxygen-rich environments (up to 145 psi and 140°F) due to its unique, stable formation. Normally, anaerobic sealants cannot be used in oxygen-rich environments due to instability, which could cause fire or explosions.
Lubrication Engineers, Inc. (Fort Worth, TX) adds to its growing arsenal of reliability solutions with its new Clear Grease Guns, a simple, cost-effective solution for avoiding costly grease cross-contamination errors. Clear Grease Guns ensure 100 percent visual grease identification.
The OCAL-BLUE Form 8 PVC-coated cast-iron conduit body from Thomas & Betts (Memphis, TN) now carries the UL Type 4X and NEMA Type 4X ratings on sizes up to two inches. These ratings assure conduit protection and corrosion-resistant performance in wash-down areas and outdoor environments.
Brady Worldwide, Inc. (Milwaukee, WI) is releasing its new 5S Marking Supplies, designed to help lean manufacturers organize their workplace, control space usage, and manage inventory. According to the company, its marking tools can help a company improve workflow and reduce downtime by giving every tool a clearly designated location.
Two new Typhoon 10 rotating water jet nozzles from NLB Corp. clean pipes as small as 5/8” in diameter. The 24-10 is ideal for applications requiring water pressure of up to 24,000 psi, while the Typhoon 15-10 is for pressures up to 15,000 psi. These self-propelling nozzles rotate at up to 7,000 rpm with a maximum flow of 10 gpm.
Hosty (Camas, WA) introduces the Trail Blazer mobile cleaning trailer for on-site or in the field cleaning. The Trail Blazer is a rugged single axle trailer unit with a 200-gallon water tank. Users can select from over 10 gas-powered pressure washers, ranging from 3 to 5.
Guardair Corporation (Chicopee, MA) have announced the addition of two new sizes to their HydroForce Power Wash Gun family: 1/2” and 3/8”. The HydroForce combines compressed air and water, resulting in an air/water jet stream perfect for heavy-duty cleaning. The power washer is designed to operate on compressed air supplied by either an in-plant or 185 tow-behind compressor, and standard municipal utility water.
The new EZ-Lock Spindle Coupling Kits from Brookfield Engineering (Middleboro, MA) are now available for the Helipath Stand, DIN Adapter, Thermosel, and the Vane Spindle Set. The Spindle Coupling allows technicians to easily attach and detach spindles, and features of the individual kits include: A UL Adapter for low viscosity materials.
Kimberly-Clark Professional (Roswell, GA) has added four new graphic designs to its Jackson-brand Halo X welding helmets. Welders can select the helmet design, auto darkening filter, and graphics to meet their specific needs and preferences. According to the company, individualized choices can help improve compliance, helping to ensure worker safety, maximizing performance, and enabling workers to exhibit a personal style on the job.
Snap-On Industrial (Kenosha, WI) has expanded its lines of heavy-duty striking wrenches and 1” Drive Flank Drive impact sockets. The striking wrenches range from 13/16” to 4-5/8” and feature the company’s Flank Drive design. A dense, rectangular beam helps maintain rigidity and transfers more power.
Loctite 2047 is a new high lubricity threadlocker from Henkel Corportation (Rocky Hill, CT), and has been designed to ensure maximum performance on fasteners greater than 7/8” in diameter. 2047 works both as a lubricant that reduces friction, and as an adhesive/sealant that eliminates loosening, maintains clamp load, and prevents corrosion.
Industrial Magnetics, Inc. (Boyne City, MI) has added the HDR3045 heavy-duty magnetic retriever to its line of products. The HDR3045 has been designed for retrieving broken drill bits from oil or water wells, but captures metal objects from any wet or dry area that requires large lifting capacity in a small package.
The automated water jet system from NLB Corp. (Wixom, MI) features five rigid lances, each with a specially-designed nozzle to deliver high-pressure water (up to 20,000 psi) to clear tubes of hardened debris. The powerful hydraulics on the ATL-5000 inserts the five lances at a rate of 39” per second.
Steam Jenny (Somerset, PA), a division of Jenny Products Inc., has introduced four new models of belt-drive cold pressure washers, which provide a longer pump life than direct-drive units. The washers are powered by 9 or 13 horsepower Honda GX Series engines, with pressure ratings between 3,000 and 4,000 psi and flow rates between 3 and 4 gpm.
The Thermocouple Mini-Grabbers from Electronic Development Labs (EDL, Danville, VA) provide a continuous thermocouple connection from bare wires to the measuring instrument without the need to attach plugs. The continuous thermocouple material, from trip to mini plug, offers a better and more convenient connection when compared to copper wire, according to the company.
Coilhouse Pneumatics (East Brunswick, NJ) has released the Typhoon blow gun line makes blow-off and clean 132oup easy. The new OSHA-compliant tips are designed specifically for the Typhoon and include: A pinpoint tip for a precise air stream to clean crevices.
The Model 590 Micro-Pneumatic Cutter from Xuron (Saco, ME) is an air-operated flush cutter that can be supplied with three different cutting heads: standard, standard with a lead retainer, and low-profile for reaching into densely populated PC boards. The tapered rectangular shape fits comfortably in small or large hands for the repetitive cutting of up to 16 AWG wire.
The Duro-Tank Stainless Steel Recirculating System from A.W.T. (Chicago, IL) has been designed for use with a washout sink and uses biodegradable chemistry to clean a variety of objects. The closed-loop recirculating system uses multistage filtering to reduce chemical consumption by as much as 80 percent.
Reed Manufacturing Co . (Erie, PA) offers an easy-to-grip Spring-Loaded Tubing Cutter. The spring-loaded cutter wheel self-feeds with constant pressure as the tool is rotated around the tubing, which means operators only have to turn the cutter in the direction of the marked arrow.
Master Bond (Hackensack, NJ) has developed the EP46HT-1, which extends the limits of epoxy adhesive/sealant formulations, according to the company. It can operate in temperatures from -100°F to 550°F and intermittent exposures up to 600°F. In addition, the epoxy has been designed to withstand repeated thermal cycling.
Master Appliance Corp. (Racine, WI) introduces its now UL-certified Model PH-1400 Proheat LCD Dial-In Heat Gun, featuring controls for digitally displayed temperatures from 130°F to 1000°F in 10°F increments. The heat gun is compact and ergonomically designed for balance and grip with top-mounted, dial-in controls for easy temperature and air flow adjustment.
igus (East Providence, RI) has unveiled a new addition to its line of DryLin SLW leadscrew tables. The DryLin SLW Pre-Loaded utilizes anti-backlash nuts to reduce axial clearance and is fitted with “turn-to-fit” linear bearings. According to the company, the DryLin is less expensive than ball bearing assembles, and costs associated with research, design, and assembly are eliminated.
Dynabrade’s (Clarence, NY) line of 0.4hp die grinders have been designed for precision grinding, deburring, and blending on a wide variety of materials. They are available in versions from 950 – 30,000 rpm and feature composite overmold housing, which reduces tool vibration and cold air transmission.
The Bondhus Corporation (Monticello, MN) introduces a revolutionary new screwdriver line featuring a handle that conforms to the tool user’s hand, which helps eliminate pressure points. In addition, less force is required to grip the handle, allowing more of the effort to be focused on extracting the screw.
un-du (St. Louis Park, MN) introduces its eponymous un-du line of adhesive removers, allowing workers to remove self-sticking and pressure-sensitive tapes, labels, and adhesives quickly. Even duct tape can be removed without leaving behind reside, grease, or a sticky mess.