Soy Technologies (Nicholasville, KY) introduces the SoyGreen MultiPack, a specially-packed case of cleaning products designed for cleaning the varied surfaces of industrial facilities. The soy-based products are environmentally-safe, VOC-compliant, and contain no alcohol or other petrochemicals.
Stanley Proto (Conyers, GA) has expanded its lineup of Dial Electronic Wrenches with seven new SKU’s, bringing the total to nine sizes to choose from. The wrenches have torque ranges from 7.5 in-lbs. to 2000 ft-lbs., so there is a solution regardless of the maintenance issue.
Hy-Lok USA (Mobile, AL) now offers leak-free double ferrule compression tube fittings, which are specifically designed for interchangeability with other major manufacturers. The Hy-Lok fittings are ideal for engine or turbine manufacturers. The tube fittings are also gaugeable, which is important in maintaining maximum safety during the installation of compression tube fittings.
The Dampney Company (Everett, MA) is a one-part, room temperature vulcanizing (RTV) silicone adhesive/sealant for high temperature industrial applications. The Thurmalox 2655 is 100 percent silicone rubber and cures to a tough, elastomeric sealant at room temperature while retaining permanent flexibility -80°F to 550°F.
Misumi USA, Inc. (Schaumburg, IL) introduces additions to its lines of Posts, Stands, and Clamps, which can be configured to suit a variety of applications. They are designed to securely mount devices, such as CCD cameras and photoelectric sensors, which are used by machine designers and builders of automated assembly, inspection, and testing systems.
Weidmuller (Richmond, VA) introduces the fourth generation Stripax and Stripax 16 tools for cutting and stripping flexible and solid conductors with PVC insulation, multi-conductors, and thin ribbon cables. The fourth generation Stripax incorporates numerous design changes and ergonomic practical improvements.
Hilti (Tulsa, OK) has announced its most powerful breaker, the TE 1500-AVR, which combines impact energy with low vibration. The TE 1500-AVR is offers 22 foot/lbs of impact energy generated by a 1,800-watt motor that offers up to 1,950 blows per minute to efficiently break up floors, slabs, or foundations.
The Oil Eater 45-gallon water-based parts cleaner from Kafko (Skokie, IL) features a thermostat pre-set to deliver a cleaning temperature of 110°F, which enhances cleaning effectiveness and minimizes liquid waste. 1,000W heaters shorten the heat-up time. The unit is made from heavy-duty high-density polyethylene plastic and industrial-grade pumps with Viton seals.
Northern Iron and Machine (St. Paul, MN) is now offering an expanded line of replacement ladle cups and mounting brackets for most model die casting machines. The cups now come in eleven models with capacities from 0.44 lbs to 33.70 lbs. The replacement cups are heavy-duty, ¼” ductile iron, and have contoured shapes for smooth pouring and resistance to metal build-up.
Altech (Flemington, NJ) offers the ATEX polyamide strain reliefs for cable entries to provide increased safety in explosion-endangered areas by eliminating any potential for arcs, sparks, or hot surfaces. The IP68-rated strain reliefs offer neoprene seals and promote optimized sealing and protection against contaminants.
Uvex (Smithfield, RI) has launched the Specifix collection of protective eyewear. The collection includes three new styles (VersaPro, PrecisionPro, and ExtremePro), all of which are designed to meet the needs of workers in various industrial facilities. The eyewear comes with Uvex’s Supra-Dura anti-scratch coating.
RIDGID (Elyria, OH) introduces the Auto-Clean drain cleaning machine for cleaning drain blockages in pipes from ¾” to 1½” in diameter. The machine features a dual-direction AUTOFEED technology, which advances and retrieves the drain-cleaning cable with the push of a lever.
Camfil Farr Air Pollution Control (APC, Jonesboro, AR) has introduced a new pulse-cleaned industrial vacuum that reduces clogs to prevent problems that result from a loss of suction during cleaning. The FarrVac operates without compressed air and may be used for everyday cleanup.
Gasoila Chemicals (Cleveland, OH) has released a new line of FAS-MARK Cap and Cover Paint, an acrylic, upside-down spray paint, which can be used to mark and identify manholes or tank cover valves. The specially-designed cap enables fast, upside-down application with little or no over spray, and the paint can be applied directly to metal and other clean, dry surfaces.
Veto Pro Pac (Norwalk, CT) has introduced the Model LT-XL tool bag, which is designed to store and organize hand tools with two large zippered storage compartments and two padded storage slots. The LT-XL is built from a PVC-impregnated body fabric, which is then riveted to a 3mm injection-molded polypropylene base.
Bondhus Corporation (Monticello, MN) has added to its line of gold and BriteGuard (silver) plated tools with a full range of inch, metric, and star tools, now available in either finish. According to the manufacturer, a popular purchase is a silver inch set and a gold metric set, to allow easy visual identification of inch or metric tools when in use.
Power Adhesives (Charlotte, NC) introduces a series of hot melt adhesive formulations, including a new Lost Foam adhesive, which is ideal where sand cores are fixed together and assembled. The adhesives bond instantly, without any wait time or use of solvents, which results in a reduction of scrap.
Zebra Skimmers Corporation (Chagrin Falls, OH) has expanded its Muscle Coalescer line to include new model for servicing air compressor condensate. According to the company, the Muscle Coalescer line has been solid for many years for separation and removal of contaminate oil from water-based fluids.
The Abtex Corporation (Victor, NY) has introduced a compact, wet Tri-Ten planetary head deburring system in a return-to-operator (RTO) configuration. The system deburrs both sides of flat parts, up to 4.5” in diameter, in a single pass while drenching the workpiece in coolant to keep parts clean and extend brush life.
Reid Supply (Muskegon, MI) has added the Dickies family clothing line, in addition to other safety products, to its online offerings at www.reidsupply.com . Reid offers a selection of work pants and shirts, in addition to garments such as denim jeans, bib overalls, shorts, high-visibility apparel, jackets, and insulated apparel in a variety of colors.
EXAIR’s (Cincinnati, OH) new Large Super Air Nozzle has been engineered to maximize entrained airflow and force while reducing compressed air use and noise. The design directs air to a single point of convergence, delivering 23 pounds of blowing force when mounted 12” from the target.
Allegro Industries (Garden Grove, CA) now offers a variety of ergonomic supports to prevent back injury, carpal tunnel syndrome, and other joint and muscular stresses. Allegro addresses the serious problem of Carpal Tunnel Syndrome (CTS) with six different wrist supports, with one designed to help maintain a neutral position at he wrist while allowing full movement of the hand and fingers.
Stafford (North Reading, MA) has developed the Grip & Go Handle, which is designed to replace a standard socket cap screw in a one-, two-piece, or hinged shaft collar to permit wrench-free adjustment without sacrificing holding power. The handle features a knurled surface for simple hand-tightening, and is ideal for any non-rotary application requiring frequent repositioning along a shaft.
The compact Tool Box Kneeler from Bennette Design Group and ErgoPads (Millis, MA) is made of soft, but supportive foam, and helps increase comfort for employees who have to work on their knees. The Kneeler also fits inside most toolboxes, allowing for easy transport and storage, and is made from a black, rugged “closed cell” foam that hides stains and dirt.
Lee Spring (Brooklyn, NY) introduces LeeP Plastic Composite Springs, which combine the strength of metal with the special attributes of high-performing engineered thermoplastics. The springs are fabricated from distinctive formations of Ultem* PEI resins, and are stocked in a variety of standard sizes, each available in a variety of strengths.