Eaton Corporation (Cleveland, OH) announced the availability of its new UNIBAG Series Filter Bags, designed using low-cost, environmentally-friendly materials. The bags also feature a molded top ring seal with an all-welded construction of new needlefelt media, which is made from recycled fibers and contains no optical white additives.
Terex Aerial Work Platforms (AWP, Redmond, WA) has introduced a new battery charger for its Genie-branded slab scissor models (the GS-30, -32, and -46 series), which helps deliver maximum battery life. The new charger meets ANSI, CSA, and CE standards. Four primary improvements were made to the new charger, which include: Moving the charger plug from the side to the rear of the scissor to improve the overall durability and make it less susceptible to damage.
Ratcheting crank handles from Lowell Corporation (Worcester, MA) offer an alternative to handwheels and other devices for machine control. Designed for permanent mounting on shafts or studs, the handles are less likely to slip, stick, or freeze than other devices. The small arc of operation is easier and safer for the operation, and helps reduce wear on the machinery.
Cooper Instruments (Warrenton, VA) has released the T-Rex Test Stand to accommodate a variety of materials, component, and product tests. The rugged and flexible system provides the capacity of 4 tons in tension and 10 tons in compression, with custom and larger capacity systems also available.
The Flange Free anti-stick gasket coating from Garlock Sealing Technologies (Palmyra, NY) is a proprietary, anti-stick agent that facilitates the removal of gaskets from flanged joints, which is applied to all of Garlock’s compressed sheet gasketing. Treating gaskets with Flange Free can reduce the time and effort required for removal after extended service, according to the company.
The Thermatek Kit from MSA (Pittsburgh, PA) is a full-body harness kit for high-heat or welding applications, and features a Kevlar/Nomex-blend webbing to provide resistance against chemicals, weld splatter, and other high-heat exposures. Kevlar stitching in contrasting colors enables users to more easily inspect the product for flaws that might arise, and the shock absorber features a Tuffweld protective cover to increase the lanyard longevity.
The General Machine Products Company, Inc. (GMP, Trevose, PA) has announced the Cordless Power DuctSlitter, a battery-powered blade that offers a mechanized method for trimming and slitting innerduct utility conduit, providing an easy alternative to the brute force typically required when cutting innerduct by hand.
West Chester Holdings, Inc. (Monroe, OH) introduces the New ProSeries R3 heavy-duty gloves for demanding industrial applications, designed with safety in mind in order to reduce recordable hand injuries. The R-series reduce hand fatigue while providing critical protection through a synthetic leather palm, which provides oil resistance, breathability, and comfort.
Dynabrade, Inc. (Clarence, NY) has introduced a new series of air-powered Die Grinders, which feature high-quality steel housings ideal for heavy-duty applications. The grinders are available with either 0.5 or 0.7 hp air motors, and each tool features a rubber grip housing to insulate the operator from vibration and cold air transmission.
NewAge Industries (Southampton, PA) now offers custom-designed and produced tubing and hose that can be heat-formed into specific shapes, useful for applications that involve multiple sections of fittings and clamps. A formed piece of tubing that is custom-made for a specific use greatly reduces the risk of kinking and flow impediment of fluid or air.
Master Bond (Hackensack, NJ) has created a two-component, room temperature-curing potting and encapsulation silicone, the MasterSil 151 Med, to withstand exposure to the vibration, impact, shock, and thermal cycling often required from medical devices. With a low viscosity of 1,500 cps, the 151 silicone is ideal for use in applications with complicated contours, according to the company.
Hobart Brothers (Chicago, IL) are offering their Fabshield XLR-8 self-shielded flux-cored wire, which excels in structural steel construction with high deposition rates and good impact strengths. The XLR-8 wire is formulated to have low diffusible hydrogen levels—less than 6.
Miller Electric Mfg. Co. (Appleton, WI) introduces the Spectrum 875, a compact plasma cutter in the 60-amp category, weighing in at just 52 lbs. and with dimensions of 13.75” by 8.5” by 18”, no more than a lunch box. Despite the compact size, the 875 offers a cut rating of 7/8” on mild steel at 10” per minute (ipm).
The MagTab from Strong Hand Tools (Pico Rivera, CA) is designed to hold tabs in place before tack welding. The magnetic, adjustable V-shaped base of the MagTab allows the tool to securely hold against round, square, or angled surfaces, allowing any small metal part to be held in place.
Hougen Manufacturing (Flint, MI) has launched a new line of portable magnetic drills, upgrading the long-standing HMD914 with a lightweight body and an ergonomic handle. In addition, the HMD914S features a swivel base drill-to-magnet coupling that provides versatility and precise positioning, which makes it ideal for challenging fabrication or jobs involving horizontal or overhead drilling.
The non-sparking, non-magnetic Hand Tools from CS Unitec (Norwalk, CT) are manufactured from aluminum-bronze or copper-beryllium and meet ATEX regulations for safe use in areas where hazardous, flammable, or combustible vapors, liquids, dusts, or residues may be present.
FEIN Power Tools (Pittsburgh, PA) has recently launched its new line of WS 14 compact angle grinder, including a feature called TipStar, which offers a switchless power option. The range of WS 14 range grinders covers the 5” to 6” grinding bandwidth. The WSG 14-70 E can be easily adjusted between 2,500 rpm and 7,000 rpm.
Birchwood Casey (Eden Prairie, MN) now offers a full line of aqueous and solvent-based inhibitors and sealants to prevent rust and corrosion on metal surfaces. The solvent-based inhibitors offer 50 to 300 hours of salt spray protection, making it ideal for raw steel/casting inventory, in-process parts, or parts in long-term storage.
The CAN-GUN1 from SafeWorld (Ashland, OR) is a new spray can tool that features the FullGrip trigger. The CAN-GUN1 has earned a 97 percent approval rating from National Street Machine Club members and a 99 percent approval rating from the Handyman Club of America, making it the only spray can handle to ever receive the “Handyman Member-Tested Seal of Approval.
The CAN-GUN1 from SafeWorld (Ashland, OR) is a new spray can tool that features the FullGrip trigger. The CAN-GUN1 has earned a 97 percent approval rating from National Street Machine Club members and a 99 percent approval rating from the Handyman Club of America , making it the only spray can handle to ever receive the “Handyman Member-Tested Seal of Approval.
The Industrial Pulley Puller (Marion, IA) is the portable, one-man hydraulic tool that removes any object from a shaft in minutes without torches, hammers, or crowbars. According to the company, the Hydraulic Industrial Pulley Puller makes the entire process an easy job for just one person.
Permabond’s (Somerset, NJ) 791 adhesive is a surface insensitive cyanoacrylate, ideal for applications involving close-fitting components, and meets the specifications for Commercial Standard A-A-3098 Type II Class I. Permabond 791 has a high tensile strength and a very high shear strength, lending it to applications that previously required a slower-curing structural adhesive.
Techni-Tool (Worcester, PA) announces the Tec-Cut Infinity Elite fine electronics pliers and cutters. The six new micro-cutter models can cut electronic wires from 18 to 20 AWG, and have a micro-sized head for fitting into tight spaces. Cutter heads are available in oval and tapered styles, with a choice of semi-flush, flush, and full-flush cuts.
The MH052 pipe sealant from Permabond Engineering Adhesives (Somerset, NJ) has BAM approval for use in oxygen-rich environments (up to 145 psi and 140°F) due to its unique, stable formation. Normally, anaerobic sealants cannot be used in oxygen-rich environments due to instability, which could cause fire or explosions.
Lubrication Engineers, Inc. (Fort Worth, TX) adds to its growing arsenal of reliability solutions with its new Clear Grease Guns, a simple, cost-effective solution for avoiding costly grease cross-contamination errors. Clear Grease Guns ensure 100 percent visual grease identification.