Maintenance Tools & Supplies
FREE Email Newsletter
Daily industrial news and top headlines for plant and maintenance managers
Make Your Work Portable
February 4, 2010 8:35 am | Product Releases | CommentsVeto Pro Pac (Norwalk, CT) has introduced the Model LT-XL tool bag, which is designed to store and organize hand tools with two large zippered storage compartments and two padded storage slots. The LT-XL is built from a PVC-impregnated body fabric, which is then riveted to a 3mm injection-molded polypropylene base.
Add Some Bling To Your Tools
February 1, 2010 9:11 am | Product Releases | CommentsBondhus Corporation (Monticello, MN) has added to its line of gold and BriteGuard (silver) plated tools with a full range of inch, metric, and star tools, now available in either finish. According to the manufacturer, a popular purchase is a silver inch set and a gold metric set, to allow easy visual identification of inch or metric tools when in use.
Is It Hot, Or Is It Just Me?
February 1, 2010 6:52 am | Product Releases | CommentsPower Adhesives (Charlotte, NC) introduces a series of hot melt adhesive formulations, including a new Lost Foam adhesive, which is ideal where sand cores are fixed together and assembled. The adhesives bond instantly, without any wait time or use of solvents, which results in a reduction of scrap.
Building Muscle
January 29, 2010 9:59 am | Product Releases | CommentsZebra Skimmers Corporation (Chagrin Falls, OH) has expanded its Muscle Coalescer line to include new model for servicing air compressor condensate. According to the company, the Muscle Coalescer line has been solid for many years for separation and removal of contaminate oil from water-based fluids.
Effortless Deburring
January 29, 2010 9:58 am | Product Releases | CommentsThe Abtex Corporation (Victor, NY) has introduced a compact, wet Tri-Ten planetary head deburring system in a return-to-operator (RTO) configuration. The system deburrs both sides of flat parts, up to 4.5” in diameter, in a single pass while drenching the workpiece in coolant to keep parts clean and extend brush life.
Dress The Part With Dickies
January 26, 2010 8:09 am | Product Releases | CommentsReid Supply (Muskegon, MI) has added the Dickies family clothing line, in addition to other safety products, to its online offerings at www.reidsupply.com . Reid offers a selection of work pants and shirts, in addition to garments such as denim jeans, bib overalls, shorts, high-visibility apparel, jackets, and insulated apparel in a variety of colors.
The New 'Super' Power: Air
January 25, 2010 3:08 am | Product Releases | CommentsEXAIR’s (Cincinnati, OH) new Large Super Air Nozzle has been engineered to maximize entrained airflow and force while reducing compressed air use and noise. The design directs air to a single point of convergence, delivering 23 pounds of blowing force when mounted 12” from the target.
Stop Carpal Tunnel Where It Starts
January 19, 2010 5:01 am | Product Releases | CommentsAllegro Industries (Garden Grove, CA) now offers a variety of ergonomic supports to prevent back injury, carpal tunnel syndrome, and other joint and muscular stresses. Allegro addresses the serious problem of Carpal Tunnel Syndrome (CTS) with six different wrist supports, with one designed to help maintain a neutral position at he wrist while allowing full movement of the hand and fingers.
Easy As Grip And Go
January 18, 2010 6:32 am | Product Releases | CommentsStafford (North Reading, MA) has developed the Grip & Go Handle, which is designed to replace a standard socket cap screw in a one-, two-piece, or hinged shaft collar to permit wrench-free adjustment without sacrificing holding power. The handle features a knurled surface for simple hand-tightening, and is ideal for any non-rotary application requiring frequent repositioning along a shaft.
Ergonomic Relief For Tough-To-Reach Spots
January 15, 2010 5:52 am | Product Releases | CommentsThe compact Tool Box Kneeler from Bennette Design Group and ErgoPads (Millis, MA) is made of soft, but supportive foam, and helps increase comfort for employees who have to work on their knees. The Kneeler also fits inside most toolboxes, allowing for easy transport and storage, and is made from a black, rugged “closed cell” foam that hides stains and dirt.
Thermoplastic Go-Anywhere Springs
January 15, 2010 5:50 am | Product Releases | CommentsLee Spring (Brooklyn, NY) introduces LeeP Plastic Composite Springs, which combine the strength of metal with the special attributes of high-performing engineered thermoplastics. The springs are fabricated from distinctive formations of Ultem* PEI resins, and are stocked in a variety of standard sizes, each available in a variety of strengths.
Squeaky Clean Conduits
January 15, 2010 5:47 am | Product Releases | CommentsGeneral Machine Products Company, Inc. (GMP, Trevose, PA) announces the Heavy Duty Stiff Spine Conduit Cleaners to its line of underground cable placement tools and equipment. The cleaners are designed to remove obstructions like dirt, ash, sand, oxides, and debris from utility conduits.
A 'Labyrinth' For Grease
January 11, 2010 3:41 am | by For more information on the Crease Canister Kits, or all the “Labyrinth Seal” motorized pulleys from Rulmeca Corp., visit www.rulmecacorp.com . | Product Releases | CommentsRulmeca Corp. (Wilmington, NC) has announced that their Grease Canister Kits are now a standard feature with the “Labyrinth Seal Option” Motorized Pulleys, including models 220M, 220H, 320L, 320M, 320H, 400L, 400M, and 400H. The canister helps maintain the labyrinth seal to provide an extra barrier of protection for shaft oil seals by forming a grease-filled path for corrosive and abrasive material.
The Right Torque, Every Time
January 11, 2010 3:39 am | Product Releases | CommentsMountz, Inc. (San Jose, CA) has introduced new torque tool options for ensuring the correct torque is applied in applications involving RF/COAX and SMA connectors. In applications using stainless steel or beryllium-copper bodies, the correct tightening of connectors is important to ensure optimum performance.
Fusion-Busting Lubricant
January 7, 2010 7:41 am | Product Releases | CommentsK88, a penetrating fluid from LPS Laboratories (Tucker, GA), is now available. The fluid features a high solvency, low surface tension, and special additives to enhance penetration, lubrication, and corrosion attack. According to the company, KB 88 meets local, state, and federal VOC regulations, such as those of the California Air Resources Board (CARB).
No More Slips, No More Adjustments
January 7, 2010 7:30 am | Product Releases | CommentsKT Pro Tools (City of Industry, CA) has released the Adjustable Slip-Jaw Wrench, which simplifies normal adjustable wrench operation. Once the jaw is adjusted to the size of the fastener, the user no long has to remove the tool and re-attach to continue tightening; the tool can be indexed back to the original position without removing the wrench from the fastener.
Sheet Cutters Of All Sizes
January 5, 2010 9:25 am | Product Releases | CommentsTRUMPF (Farmington, CT) will showcase a number of new products at the AHR Expo in Orlando, Fl. between January 25-27. The TruTool series of tools includes the S 130, developed specifically for thin-sheet users, measuring only 10”x15” and weighing in at 3 pounds with its battery.
Get Organized, Stay Lean And Productive
January 5, 2010 9:24 am | Product Releases | CommentsAkro-Mils (Akron, OH) has expanded its Super-Size AkroBins line with 24” length bins in two new sizes: 24”L x 11”W x 7”H and 24”L x 18.25”W x 12”H. The AkroBins feature optional width and length dividers that allow for even more effective parts separation and versatility in organization.
Hydraulic Bending To-Go
December 23, 2009 7:24 am | Product Releases | CommentsDake (Grand Haven, MI) has released the VH200, a vertical hydraulic cylinder capable of bending tubing up to a 2” diameter. At 60 pounds, the unit it portable and can be operated in the field, with either a manual pump or an air-operated pump. The VH200 is furnished with one of three standard dies, for either a 6” or 7” radius, and 12 additional dies are available.
High-Speed Die Grinders
December 23, 2009 7:22 am | Product Releases | CommentsDynabrade, Inc. (Clarence, NY) is introducing a series of air-powered Die Grinders, which feature high-quality steel housings. The grinders are available in either .5 or .6 hp air motors and use a rubber grip housing to insulate the operator from vibration and cold air transmission.
Miniature Cutters And Pliers
December 21, 2009 9:17 am | Product Releases | CommentsXuron Corp. (Saco, ME) has released a pair of wire cutters and pliers for grasping and tip-cutting soft lead wires in electronics production, assembly, and rework. The Xuron 170-II Micro-Shear Flush Cutter and Model 450S Pliers are ideal for working with wire from 1 mil to 18 Ga thick, and feature Light-Touch return springs, along with Xuro-Rubber cushioned hand grips.
All-Welded Polyester Bagging
December 21, 2009 9:16 am | Product Releases | CommentsEaton Corporation (Cleveland, OH) announced the availability of its new UNIBAG Series Filter Bags, designed using low-cost, environmentally-friendly materials. The bags also feature a molded top ring seal with an all-welded construction of new needlefelt media, which is made from recycled fibers and contains no optical white additives.
The Genie Of Battery Charging
December 18, 2009 9:19 am | Product Releases | CommentsTerex Aerial Work Platforms (AWP, Redmond, WA) has introduced a new battery charger for its Genie-branded slab scissor models (the GS-30, -32, and -46 series), which helps deliver maximum battery life. The new charger meets ANSI, CSA, and CE standards. Four primary improvements were made to the new charger, which include: Moving the charger plug from the side to the rear of the scissor to improve the overall durability and make it less susceptible to damage.
Safe And Simple Cranks
December 17, 2009 11:06 am | Product Releases | CommentsRatcheting crank handles from Lowell Corporation (Worcester, MA) offer an alternative to handwheels and other devices for machine control. Designed for permanent mounting on shafts or studs, the handles are less likely to slip, stick, or freeze than other devices. The small arc of operation is easier and safer for the operation, and helps reduce wear on the machinery.
A T-Rex For Your Plant
December 17, 2009 11:04 am | Product Releases | CommentsCooper Instruments (Warrenton, VA) has released the T-Rex Test Stand to accommodate a variety of materials, component, and product tests. The rugged and flexible system provides the capacity of 4 tons in tension and 10 tons in compression, with custom and larger capacity systems also available.
