ETP Shaft locking bushings from Zero-Max (Plymouth, MN) produce accurate and concentric mounting compared to mechanical shaft locking bushings. In addition, the ETP bushings incorporate a double-walled sleeve that encapsulates a pressure medium, and are ideal where repeated mounting and dismantling of components is required.
Royal Products (Hauppauge, NY) has developed the Quick-Grip CNC Collet Chucks for workholding. When installing the collet, a special installation tool compresses the rear end of the collet so it can be inserted, and upon expansion, the collet locks into place via a hook-and-groove arrangement.
IPG (Brandenton, FL) has developed the Genesys OXO-Biodegradable High Performance Machine Film, which is a light-gauge cast film available in 50, 63, of 75 gauge thicknesses. Genesys is designed for use on automated stretch wrapping equipment. The films biodegrade much more quickly than standard stretch films when exposed to oxygen and sunlight, leaving no harmful by-products or impact on the environment.
Computer Imprintable Label Systems (CILS — Burlington, MA) has launched their new CIL8200S Metalized polyester range of chemical-resistant labels, which can be customed “in-house” using a Thermal Transfer Printer. The labels, when used in combination of thermal transfer ribbons, resist a range of chemicals and solvents, and are suitable for rating plate and batch ID labels for fuel valves, hydraulic pumps, flow control gauges, and more.
Master Bond Inc. (Hackensack, NJ) has developed the Polymer System EP31 for use with a variety of substrates, including metals, plastics, rubbers, ceramics, and glass. The two-part system has a lap shear strength exceeding 4,600 psi, a peel strength of more than 40 pli, a tensile modulus of more than 410,000 psi, and a flexural strength that exceeds 13,000 psi.
The two-part epoxy delivery systems from Adhesive Packaging Specialties (Peabody, MA) include the thorough blending of two-component materials, degassing them to remove entrapped air, and then freezing the resin system in a disposable syringe or cartridge. The containers are then packed in dry ice and shipped directly to the customer’s facility to provide on-demand mixing and dispensing of two-component materials in a controlled process.
The Beyond platform of high-performance tool grades for holemaking applications from Kennametal (Latrobe, PA) is now available in three new grades: KCPK10, KCU25, and KCU40. The whole series covers SPPX/SPGX Drill Fix Square outboard inserts, available in HP, FP, and MD geometries. Kennametal’s indexable drill platform can be used in virtually any short-hole applications with CNC lathes or machining centers.
Desco (Chino, CA) is introducing ESD Susceptibility Labels (2” x 2”) in a new Integrated Dispenser, which can be used to identify assemblies and devices that have sensitivity to ESD events. They are ideal for closing shielding bags and seal ESD-protective packaging, according to the company.
Northfield Precision Instrument Corporation (Island Park, NY) has introduced their latest custom workholding chuck, the Model 450L. The company has mounted aluminum pie jaws, with custom flex inserts bolted to the jaws, to the top of a standard 450 air chuck. The flexing inserts compensate for any out of roundness in the work piece, according to the company.
Coxreels (Tempe, AZ) announces the addition of a wand holder for its 1125 Series hand crank and motorized reels. The new accessory is made out of lightweight aluminum, with a black powder coating finish for corrosion resistance. The holder stands in at 24” long, with a diameter of 1.
The T-Rex Test Stand from Cooper Instruments (Shawnee, OK) has been designed to accommodate a variety of materials, component, and product tests. The flexible system provides a capacity of 4 tons in tension and 10 tons in compression. The numerous applications possible with the T-Rex system include, according to the manufacturer: mechanical connection tests, adhesive bond strength verification, crushing strength review, and more.
PSI Repair Services, Inc. (PSI, Livonia, MI) has launched a new video that showcases PSI’s repair facilities, advanced diagnostic equipment, as well as the cost-saving services PSI offers. The company offers repair services on electronics (circuit boards, drives), hydraulic components (servos, motors, pumps), industrial robots, legacy system components from all the major suppliers, and more.
Ingersoll Rand (Annandale, NJ) has designed the new 2015MAX and 2025MAX Hammerhead low-profile Impactools, which are designed for optimal performance even in extremely confined spaces. According to the company, the tools have the power and speed of an impact combined with the reach of a ratchet, with a head-height of less than 2”, 180 ft-lb of max torque, and 7,100rpm of speed.
Tencarva Machinery Company (Greensboro, NC) has expanded its territory for representation of the John Crane lines of seals to include Tennessee. The mechanical seal brand names now available through Tencarva in Tennessee include John Crane, Sealol, Safematic, and Flexibox.
The Manual Safety-Chock from Serco (Carrollton, TX) provides loading docks with a versatile wheel restraint solution, capable of engaging and restraining the wide range of trailers that come to the dock, including trucks with lift gates, damaged rear impact guards, or different axle configurations.
The Parker Hannifin Corporation (Columbus, OH) has introduced a new line of SAE aluminum tube fittings that are approximately 65 percent lighter than equivalent steel and stainless steel fittings, according to the company. The aluminum fittings can reduce the costs of converting a system from steel or stainless steel because no component redesign is necessary.
The Proofer Storage Stand from the Paul N. Gardner Co., Inc. (Pompano Beach, FL) safety stores six proofer rollers and the proofer assembly. The rollers are suspended by their journals to protect the engraved surface area, and rollers with wide or narrow hubs can also be stored.
Lista International Corporation (Holliston, MA) introduces its new All-Purpose Workbench, a high-quality, general purpose workbench capable of supporting 1,000 pounds. There are dozens of choices for storage, adjustability and configurability, available accessories and options, mobility, and colors, giving users a bunch system best suited for their particular needs.
Greenlee (Rockford, IL) has updated its 6810 Cable Feeder to be more effective when used with low friction cables, such as the Southwire SIMpull. As a result, the feeder now comes equipped with new tires that are capable of operating pressures up to 50 psi, compared to 22 psi for the previous version.
Practical Components (Alamitos, CA) has released the WTK-1 Terminal and Wire training kit, which includes everything customers need to train and practice their wire soldering skills. The kit contains three different gauges of wire and five styles of terminals, representative of what is available in the marketplace.
The five-gallon Oil Eater Table-Top Parts Cleaner from Kafko International Ltd. (Skokie, IL) makes the cleaning of greasy parts faster, easier, and safer, according to the company. The water-soluable Oil Eater solution flows through the integral cleaning brush, allowing for an easier clean-up.
Sherwin-Williams (Cleveland, OH) introduces Polysiloxane 1K, a single-component polysiloxane finish coat that provides weathering and chemical resistance like other polyurethanes. The 1K coat also has long-term color and gloss retention, extending the system’s life cycle in harsh environments, making it an ideal steel coating choice for maintenance in industrial environments.
Snap-on Industrial (Kenosha, WI) is now offering the Mini-Ductor II, a handheld, portable induction heater designed to safely and accurately heat nuts, bolts, and other fasteners, making removal easier. The Mini-Ductor II uses electromagnetic fields to heat the fasteners precisely while leaving the surrounding area untouched.
The Combo Roll Groovers from Reed Manufacturing Company (Erie, PA) are now available in a new model for larger pipe, the RGCOMBO812, which forms standard rolled grooves in 8” to 12” steel, stainless steel, and aluminum. The two-in-one tool yields cost savings by allowing a complete change in minutes from power machine operation to manual work, according to the company.
Cold Jet, LLC (Cincinnati, OH) has announced the new Aero V, a compact, single-hose electric dry ice blast cleaning system. The Aero V uses a compact variable feed system with an aerodynamic rotor to ensure high reliability and smooth pulse-free dry ice blasting performance.