The Portable Mechanics’ Service Sets from Snap-on Industrial (Kenosha, WI) put large and small hand tools, including screw drivers, wrenches, and pliers — along with multimeters and other specialty equipment — at easy reach for professionals looking for maximum protection of their tools.
BURNDY (Manchester, NH) announced the new High Performance PATRIOT PATMD6-14V series crimping tools, which utilize the same 14.4 volt Ni-MH batteries as older models, but are 80 percent faster. The PATRIOT can complete a crimp on a 4/0 copper crimp in approximately two seconds, according to the company.
Supercritical Fluid Technologies, Inc. (Newark, DE) has developed the SFT-150 Supercritical Fluid Extraction/Reaction System, which allows users to investigate the feasibility of applying supercritical fluid techniques to various processing situations. A modular design makes it easy and cost-effective to alter the unit’s basic configurations, adapting it to meet new or evolving application needs, according to the company.
Flange Spreaders separate pipe flanges for the replacement of the flange gasket or the reapplication sealant to the flange face. The Safety Boy Flange Spreader, from WM.L.RIGGS Company (Tulsa, OK) attaches to the flange mounting holes and spreads the flange faces without the risk of damage to the flange sealing surfaces.
The Speedaire Hand Tappers, which are ideal for general purpose tapping, are now available from W.W. Grainger (Lake Forest, IL). They eliminate time-wasting hand tapping with a pneumatic high-reversal-type motor with added torque, which allows the tapper to handle a range of tap sizes. A quick-change tool holding provides tap-changing flexibility and accepts optional clutch-type tap holders.
The 110 Gallon Chip Trapper from EXAIR (Cincinnati, OH) offers a fast, easy way to clean large coolant sumps, according to the company. The Chip Trapper removes solids — such as chips, swarf, and shavings — out of used coolants and other liquids, and is ideal for use on machines with parts washers, tanks, and storage containers.
ESAB Welding & Cutting Products (Florence, SC) introduces the Origo MIG family of welders — including the MIG 320, 410, and 510 — all of which offer a wide current and voltage range that simplify optimizing settings for a wide variety of filler metals and gases. Made with a strong galvanized metal casing designed to withstand harsh environments, the Origo family features large wheels, sturdy lifting eyelets, and a standard undercarriage for easy forklift transport.
Chicago Pneumatic (Rock Hill, SC) has introduced the CP6720, a new 1/2” impact wrench that delivers speed, power, and durability for industrial maintenance. The impact wrench features 425 ft-lbs. of torque, plus a one-hand push button for forward and reverse operation. A four-position regulator allows for better control of assembling bolts and other fasteners, according to the company.
The new “Versatile Mount” from Sprinter Marking, Inc. (Zanesville, OH) was engineered to provide manufacturers with a flexible, changeable mount for a variety of positioning applications. Despite its compact size (1-3/8” x 2” x 2”), the company claims it can support substantial weights when secured.
The Duro-Tank Stainless Steel Recirculating Systems from A.W.T. World Trade (Chicago, IL) are designed for use with a washout sink with biodegradable chemistry to clean a variety of objects. The cleaning solution is applied directly to the part through a one-piece wand and scrub brush, while the closed-loop recirculating system uses progressive multi-stage filtering to extend solvent life.
The Bio-Remediation process from Bio-Circle (Windsor, CT) eliminates the need for toxic solvents when cleaning tools and parts, and also reduces the possibility any dangerous effluent to virtually zero. The Bio-Remediation process uses microscopic life forms to “digest” contaminations and convert them to clean H2O with negligible traces of CO2.
The MIGHTY-LOK 3 from The Malish Corporation (Willoughby, OH) is a multi-purpose pad driver that can be used with pads, bonnets, diamond discs, and abrasive pucks. The driver is available in sizes ranging from 13” to 20” and includes a molded riser and universal Malish NP-9200 Tru-Fit Clutch Plate built in to the block.
Wiley X (Livermore, CA) has introduced the Wiley X Hybrid Glove, with an 80/20 Nomex/Kevlar weave and an injected molded knuckle protector that can be slipped in and out in seconds to protect the hands. A goatskin rubber helps reinforce high-wear areas on the palm and underside of the fingers.
Georgia-Pacific’s (Atlanta, GA) line of Brawny Industrial Wipers is expanding with the addition of Brawny Industrial High Performance Shop Towels, which are engineered to replace rags and shop towels. Brawny towels are designed to be hygienic, safe, and strong, according to the company, and are able to stand up to tough working environments.
Ideal Industries, Inc. (Sycamore, IL) is now offering a 5-in-1 non-conductive screwdriver that meets ASTM F1505-94 and IEC900 standards for the safety of technicians working on electrical components. Each screwdriver is UL- and VDE-listed and certified to 1,000V AC or 1,500V DC for safety. The high-visibility bright yellow handle, along with a permanently-bonded orange insulation shaft, act as an “at-a-glance” safety system, according to the company.
Magid Glove & Safety (Chicago, IL) has introduced Magid E2 IHP932J and IHP932CJ Jumbo-Sized, Uncorded, and Corded Disposable Earplugs. The hypo-allergenic polyurethane foam has a high noise reduction rating (NRR) of 32 dB, with a variety of sizes. A tapered design ensures a comfortable fit all day long, and the red PVC cord keeps the plugs close at hand while reducing loss and further enhancing visibility.
Accu-Lube Gel Paste from ITW ROCOL North America (Glenview, IL) is a natural-based lubricant that is environmentally-safe and ideal for horizontal applications, because it won’t run or drip. The gel texture makes it easy to apply to tools with a soft brush, without risk of damaging the tool, according to the company.
O-Z/Gedney (Rosemont, IL) announces the AXB Expansion Fitting for long conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. The fitting permits linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection.
W. W. Grainger, Inc. (Lake Forest, IL) now offers a combination belt and bench grinder, which features a powerful capacitor motor for all-day grinding and finishing applications. The grinder has an adjustable belt for vertical and horizontal positioning, plus a dynamically-balanced rotor and sealed bearings that minimize vibration.
The Steam Jenny, from Jenny Products, Inc. (Somerset, PA) has introduced a full line of electric-powered cold pressure washers, which can be operated in enclosed areas where gas-powered machines can’t be used. The washers are powered by Marathon or Baldor electric motors, which range from 1.
Milwaukee Electric Tool Corporation (Milwaukee, WI) has announced the transition of all its V28 cordless power tools to the new M28 LITHIUM-ION battery pack, which is completely compatible with current V28 products. The company has also added Digital Power Management (DPM) to the battery packs to ensure optimal battery life and run-time, while protecting the battery from tough conditions.
Omega (Laval, Quebec, Canada) has released its catalog, the DILBERT NEW HORIZONS in Products for Sanitary Applications Version No. 27 , which contains 180 pages of information on top-selling products for manufacturers. These products include the Digital RTD Thermometers with NEMA 4 enclosures, which are ideal for washdown environments, according to the company.
Sprayon (Cleveland, OH) is now integrating their chemical and lubricant products with a packaging and identification system, based on the principles of 5S and Kanban, to create the Sprayon System. The system communicates what products are to be used for each application, and ensures users always have the right product on hand when it is needed.
Penn Stainless Products (Quakertown, PA) added a new line of 330 Plate and Processed Flat Bar to its family of high-temperature products. According to the company, 330 is ideal for high-temperature, high-pressure applications. In addition, the alloy can be used where resistance to the combined effects of thermal cycling and carburization is necessary.
ZYP Coatings, Inc. (Oak Ridge, TN) introduces is 4-oz. Boron Nitride Aerosol Lubricoat spray can. The small container allows users to test the boron nitride coating on various substrates at temperatures up to 1,000°C in air, and over 1,800°C in inert/nitrogen atmospheres. According to the company, boron nitride is chemically inert and provides non-stick, release, and barrier-layers to reactive materials.