General Mfg., Inc. (Bluffton, IN) has launched its IS300 Intrinsically Safe, Cordless LED work light. The IS300 comes with three 3-watt LEDs and has the capability of operating in beam mode for use as an inspection light. The long-life LEDs are rated at 50,000 hours and produce 5,000K bright, white light.
Wright Tool (Barberton, OH) introduces the WrightGrip SB ratchet for safer installation of scaffolding. The 10.5” ratchet is an all-inclusive tool that features a ½” drive, 7/8” open-head ratchet, a replaceable hammer, and a 7/8” open-end wrench.
The Supreme 10AOHT-LO adhesive from Master Bond (Hackensack, NJ) is a single-component, no mix, thermally-conductive compound featuring electrical insulation and durability against impact, thermal shock, vibration, and stress fatigue cracking. It meets NASA low outgassing specifications and is formulated to cure at elevated temperatures between 250° and 300°F for 1 hour.
Barco (Chicago, IL) has introduced the E-Series air union for air-related manufacturing applications. The E-2 series can handle difficult industrial environments that other rotary units might not, with a nitrotec surface treatment, which increases the wear- and corrosion-resistance.
The Loctite QuickTape 249, from Applied Industrial Technologies (Cleveland, OH), is the first threadlocker in tape form, which allows for easy portability and allocation. The tape offers no leaking, clogging, or mess. Check out the video below to learn more: Or visit www.appliedindustrial.
Strong Hand Tools (Pico Rivera, CA) designed the 90° Corner Magnet for holding workpeices from the outside, leaving unobstructed space inside your workpiece for welding. The boomerang-shaped magnet has a height of just 3-1/2”, making it compact enough to take anywhere in the shop.
The AMD-035 SuperStar Membrane Dryer from LA-MAN Corporation (Mazeppa, MN) provides clean and dry compressed air designed with the automotive industry in mind, but can be used wherever refrigerated dryers may be too large. The dryer lowers the dew point by continuously removing water vapor, with drops up to 20°F, making it ideal for spray booth applications.
RIDGID (Elyria, OH) introduces the SeeSnake LT1000 laptop interface, which provides a flexible way to digitally record, monitor, and manage drain footage when paired with a RIDGID SeeSnake reel and the SeeSnake HQ software suite. The laptop interface allows users to complete tasks without transferring data between field devices and a PC, which reduces the overall time spent on the task.
The KeyDisc Holder from Count On Tools, Inc. (Gainesville, GA) keeps key L-wrenches readily available for every situation. With a new design, the KeyDisc holder can be rotated around to lock the tools in place for transporting the tool set. To use the tools, simply rotate the disc clockwise as far as it will go, and remove the keys by twisting the L-wrench forward.
Misumi USA, Inc. (Schaumburg, IL) introduces a new product family of 316 stainless steel screws, nuts, and washers. The fastening products are manufactured to precise specifications to be used with machinery and automated systems in settings where sanitation standards are stringent and frequent washdowns are required — such as the food, beverage, chemical, medical, and pharmaceutical industries.
Thomas & Betts (Memphis, TN) has announced the Color-Keyed HEX-FLEX crimping dies to provide an inspectable, high-performance crimp on flex-conductor cables. The dies create a hex-style crimp on the top of the connector, and an indent crimp in the bottom for superior pull-out resistance.
Custom-engineered plastic components that can be machined and drilled to customer specification are now available from Interstate Specialty Products, Inc. (Sutton, MA). The components can be made from a wide range of materials, including rubber and virtually all thermoplastics, between 0.
Hyde Industrial Blade Solutions (IBS, Southbridge, MA) has engineered a line of professional-grade blades, the Wavy Scallop Edge Blades, that combine the ability to cut tough materials with a longer blade life to outperform standard beveled edge blades. The new product can be used in numerous applications, such as cutting reinforced hydraulic hose or rubber belting.
Thomas & Betts (Memphis, TN) has introduced a new Push-In Luminaire Disconnect that enables technicians to change ballasts safely and easily without having to trip the main power breaker. The disconnect is ideal for all fluorescent lighting applications up to 4A, 600V, and complies with 2008 NEC 4010.
The Polyflex FR fire-resistant impregnation resin from IMPCO (East Providence, RI) is suitable for sealing electronic connectors, wires, and wiring assemblies against corrosion. Polyflex FR can create a permanent flame-retardant barrier that prevents corrosion-related failures by uniformly filling all gaps and pores, and will not reliquify, melt, or burn.
The COBRA LIFELINK Single-Man cart from Garlock Safety Systems (Plymouth, MN) is a mobile anchorage system that one or two people can tie-off to when they’re on an elevated job site by providing fall arrest for 1 worker and fall restraint for a second. The modular design fits almost anywhere.
Tyco Electronics (Harrisburg, PA) has announced the North American launch of Pressure-Sensitive Adhesive (PSA) labels for safety, warning, and electrical box identification. The labels have a permanent adhesion and are protected by a lamination that offers resistance to abrasions, fluids, dirt, and stains.
American Technical Publishers (Orland Park, IL) has introduced a new textbook specifically designed for teaching the design, application, and maintenance of hydraulic and pneumatic systems. Fluid Power Systems addresses fluid power systems, components, and devices, and focuses on troubleshooting techniques by introducing descriptions, operational procedures, common applications, and operating characteristics.
IRISS, Inc. (Bradenton, FL) has expanded its product line of Custom Application Products (CAP) to include a Square Infrared Window capable of passing durability and impact requirements. IRISS custom-builds the square windows because round windows sometimes do not provide complete coverage, or because so many windows are required they become cost prohibitive to the customer.
RNR Plastics, Inc. (Raynham, MA) has developed a clear vinyl pouch that allows technicians, mechanics, and maintenance personnel to keep important documents nearby while protecting them from oil spills or other contaminants. The Critical Documents pouch is made from clear PVC and is ideal for instructions, schematics, production schedules, maintenance logs, or other documents that need to be used close to the work.
Coilhose Pneumatics (East Brunswick, NJ) introduces an extended trigger system for its high-force blow gun, the Coilhose Cannon. The metal handle retrofit kit enables the user to more easily operate the gun while wearing protective gloves with a long lever-style mechanism.
3M (St. Paul, MN) has expanded its reusable facepiece respirator line with the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series, designed for flexibility in extreme environments. The new facepiece enables a wide peripheral view, along with a quick assembly and disassembly.
Kimberly-Clark Professional (Roswell, GA) has redeveloped its Jackson Safety G60 Purple Nitrile Cut Resistant Gloves, which now provide a higher level of cut resistance with more dexterity and comfort features. The gloves are ideal for use in metal fabrication, glass handling, automotive assembly, and other applications involving the handling of sharp parts.
Reid Supply Company (Muskegon, MI) has revamped their full-color 2010-2011 catalog with new smart categorization. According to the company, these new categories will help customers find the products they need out of the 900-page catalog. The color-coded categories include fasteners and hardware, leveling devices, material handling, MRO supplies, safety equipment, and more.
The Henkel Corporation (Rocky Hill, CT) has introduced their newest anaerobic threadlocker: Loctite QuickTape 249 Threadlocker Tape. The medium-strength tape provides the same performance of liquid threadlockers yet can be carried in a pocket or toolbox, and can be pre-applied to fasteners for future assembly.