Advertisement
Maintenance Tools & Supplies
Subscribe to Maintenance Tools & Supplies
View Sample

FREE Email Newsletter

Daily industrial news and top headlines for plant and maintenance managers

Two-In-One Grooves

July 1, 2010 12:27 pm | Product Releases | Comments

The Combo Roll Groovers from Reed Manufacturing Company (Erie, PA) are now available in a new model for larger pipe, the RGCOMBO812, which forms standard rolled grooves in 8” to 12” steel, stainless steel, and aluminum. The two-in-one tool yields cost savings by allowing a complete change in minutes from power machine operation to manual work, according to the company.

A Blast Of Ice

July 1, 2010 12:26 pm | Product Releases | Comments

Cold Jet, LLC (Cincinnati, OH) has announced the new Aero V, a compact, single-hose electric dry ice blast cleaning system. The Aero V uses a compact variable feed system with an aerodynamic rotor to ensure high reliability and smooth pulse-free dry ice blasting performance.

Cut Anything

July 1, 2010 7:13 am | Product Releases | Comments

The pneumatic saw and quick-clamp assembly from ESCO Tool (Holliston, MA) lets users cut steel plate up to 2” thick and 15’ wide anywhere there is a 90 psi compressed air supply. The APS-438 Air-Powered Saw and Quick-Clamp lets workers take the saw to the steel plate rather than transporting the plate to a large table saw.

Advertisement

Work Lamps Reimagined

June 28, 2010 6:45 am | Product Releases | Comments

Grote Industries (Madison, IN) has developed a new version of its Trilliant 36 LED WhiteLight Conversion Bulb, which is designed to operate in adverse conditions where sodium chloride, high humidity, and other corrosive elements wreak havoc on most PAR 36 incandescent work lamps.

High-Pressure Pipe Cleaners

June 21, 2010 6:27 am | Product Releases | Comments

A new family of Rotating Line Moles (RLM) are now available from NLB Corp. (Wixom, MI), and give users more than 40 choices to clean pipes with high-pressure water. The RLMs feature operating pressures of 10,000 or 20,000 psi, plus a variety of flows and nozzle patterns for specific applications.

Eliminate Flux, Dirt

June 21, 2010 6:26 am | Product Releases | Comments

Aqueous Technologies Corp. (Rancho Cucamonga, CA) introduces the Trident OneShot automatic deflexing and cleanliness testing system, which is designed to work with post-reflow circuit assemblies. The OneShot is equipped with a 16” touch-screen interface, unlimited recipe quantities, a Windows PC control platform, networking capabilities, and real-time cleanliness testing.

Hold Delicate Parts

June 18, 2010 11:15 am | Product Releases | Comments

The ROTA NCR 6-jaw compensation chunk from SCHUNK (Morrisville, NC) allows the clamping of thin-walled and easily-deformed components with diameters up to 1,200mm. The ROTA NCR consists of a central chuck piston, which has three inner pendulums positioned at 120°, which work in conjunction with three pairs of base jaws.

Buy Genuine

June 17, 2010 6:05 am | Product Releases | Comments

Genuine Moyno (Springfield, OH) replacement parts ensure Moyno pumps continue to perform and help reduce the total cost of ownership. The parts meet all product design parameters, quality standards, and manufacturing tolerances. In addition, Moyno’s parts help protect product warranties.

Advertisement

Cleaning Gets A Cold

June 17, 2010 5:59 am | Product Releases | Comments

Cold Jet, LLC (Cincinnati, OH) has introduced the Aero 40 HP, a compact, high-pressure dry ice blast cleaning system, which provides economical cleaning in an environmentally-friendly format. The Aero 40 HP uses Cold Jet’s SureFlow system to prevent clogging and pellet sublimation, ensuring uninterrupted cleaning performance.

Tubular Products Made-To-Order

June 15, 2010 9:25 am | Product Releases | Comments

Penn Stainless Products (Quakertown, PA) now offers nonstandard welded tubular items in stainless, duplex, nickel, 6-moly, and chrome moly materials. They can also be ordered in light gauge and heavy wall thicknesses. Made-to-order OD sizes range from 1/8” through 96” diameter, while stock sizes range from 1/8” to 24” diameter.

Keep Cables And Hoses Safe

June 15, 2010 9:23 am | Product Releases | Comments

igus (East Providence, RI) is now offering the RX energy tube, which was developed especially for the machine tool industry, and is nearly 100 percent chip-proof. The domed outer contour allows debris — such as metal or wood chips — to simply fall off the tube.

Light Up Your Plant

June 14, 2010 8:15 am | Product Releases | Comments

General Mfg., Inc. (Bluffton, IN) has launched its IS300 Intrinsically Safe, Cordless LED work light. The IS300 comes with three 3-watt LEDs and has the capability of operating in beam mode for use as an inspection light. The long-life LEDs are rated at 50,000 hours and produce 5,000K bright, white light.

The Ultimate All-In-One

June 11, 2010 7:25 am | Product Releases | Comments

Wright Tool (Barberton, OH) introduces the WrightGrip SB ratchet for safer installation of scaffolding. The 10.5” ratchet is an all-inclusive tool that features a ½” drive, 7/8” open-head ratchet, a replaceable hammer, and a 7/8” open-end wrench.

Advertisement

NASA-Friendly Adhesives

June 11, 2010 7:24 am | Product Releases | Comments

The Supreme 10AOHT-LO adhesive from Master Bond (Hackensack, NJ) is a single-component, no mix, thermally-conductive compound featuring electrical insulation and durability against impact, thermal shock, vibration, and stress fatigue cracking. It meets NASA low outgassing specifications and is formulated to cure at elevated temperatures between 250° and 300°F for 1 hour.

A Union Of Air

June 10, 2010 5:26 am | Product Releases | Comments

Barco (Chicago, IL) has introduced the E-Series air union for air-related manufacturing applications. The E-2 series can handle difficult industrial environments that other rotary units might not, with a nitrotec surface treatment, which increases the wear- and corrosion-resistance.

Loctite… Tape?

June 10, 2010 5:25 am | Product Releases | Comments

The Loctite QuickTape 249, from Applied Industrial Technologies (Cleveland, OH), is the first threadlocker in tape form, which allows for easy portability and allocation. The tape offers no leaking, clogging, or mess. Check out the video below to learn more: Or visit www.appliedindustrial.

Hugging The Corner

June 7, 2010 7:23 am | IMPO | Product Releases | Comments

Strong Hand Tools (Pico Rivera, CA) designed the 90° Corner Magnet for holding workpeices from the outside, leaving unobstructed space inside your workpiece for welding. The boomerang-shaped magnet has a height of just 3-1/2”, making it compact enough to take anywhere in the shop.

No Humidity Here

June 3, 2010 9:34 am | Product Releases | Comments

The AMD-035 SuperStar Membrane Dryer from LA-MAN Corporation (Mazeppa, MN) provides clean and dry compressed air designed with the automotive industry in mind, but can be used wherever refrigerated dryers may be too large. The dryer lowers the dew point by continuously removing water vapor, with drops up to 20°F, making it ideal for spray booth applications.

Laptops 'See' Into Drains

June 3, 2010 9:33 am | Product Releases | Comments

RIDGID (Elyria, OH) introduces the SeeSnake LT1000 laptop interface, which provides a flexible way to digitally record, monitor, and manage drain footage when paired with a RIDGID SeeSnake reel and the SeeSnake HQ software suite. The laptop interface allows users to complete tasks without transferring data between field devices and a PC, which reduces the overall time spent on the task.

Count On Your Wrenches

June 1, 2010 7:16 am | Product Releases | Comments

The KeyDisc Holder from Count On Tools, Inc. (Gainesville, GA)  keeps key L-wrenches readily available for every situation. With a new design, the KeyDisc holder can be rotated around to lock the tools in place for transporting the tool set. To use the tools, simply rotate the disc clockwise as far as it will go, and remove the keys by twisting the L-wrench forward.

Fasteners Ready For Anything

June 1, 2010 7:14 am | Product Releases | Comments

Misumi USA, Inc. (Schaumburg, IL) introduces a new product family of 316 stainless steel screws, nuts, and washers. The fastening products are manufactured to precise specifications to be used with machinery and automated systems in settings where sanitation standards are stringent and frequent washdowns are required — such as the food, beverage, chemical, medical, and pharmaceutical industries.

Crimping Made Easy

June 1, 2010 7:14 am | Product Releases | Comments

Thomas & Betts (Memphis, TN) has announced the Color-Keyed HEX-FLEX crimping dies to provide an inspectable, high-performance crimp on flex-conductor cables. The dies create a hex-style crimp on the top of the connector, and an indent crimp in the bottom for superior pull-out resistance.

Get Custom Plastic

May 27, 2010 7:23 am | Product Releases | Comments

Custom-engineered plastic components that can be machined and drilled to customer specification are now available from Interstate Specialty Products, Inc. (Sutton, MA). The components can be made from a wide range of materials, including rubber and virtually all thermoplastics, between 0.

For Cutting, Wavy Is Better

May 21, 2010 7:32 am | Product Releases | Comments

Hyde Industrial Blade Solutions (IBS, Southbridge, MA) has engineered a line of professional-grade blades, the Wavy Scallop Edge Blades, that combine the ability to cut tough materials with a longer blade life to outperform standard beveled edge blades. The new product can be used in numerous applications, such as cutting reinforced hydraulic hose or rubber belting.

A Luminary In Electrical Safety

May 21, 2010 7:30 am | Product Releases | Comments

Thomas & Betts (Memphis, TN) has introduced a new Push-In Luminaire Disconnect that enables technicians to change ballasts safely and easily without having to trip the main power breaker. The disconnect is ideal for all fluorescent lighting applications up to 4A, 600V, and complies with 2008 NEC 4010.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading