Reed Manufacturing (Erie, PA) announces the addition of two new models to its SawIt® line. SAWITSD and SAWITD pneumatic saws feature immediate shut down when throttle is released and immediate start up with throttle squeeze. On the SAWITSD version only, a trigger lock prevents accidental “on” if the trigger is bumped or pressed unintentionally.
The No. 983 from The Grieve Corporation (Round Lake, IL) is an electrically-heated, 550°F bench oven. The oven has 3” insulated walls, a Type 304, 2B finish stainless steel interior, and a #4 brushed stainless steel exterior. Two 13” x 4” access slots are equipped with insulated covers on the rear wall of the oven, and the 8” x 10” double-pane Pyrex window can be used for viewing the oven chamber.
The MaintenanceMaster whiteboard system from Magnatag (Macedon, NY) can help maintenance managers cut equipment downtime, track asset conditions, and eliminate confusion by visually scheduling and displaying a full year’s preventative maintenance activity. According to the company, users can use color-coded magnet symbols on the board to show a 52-week plan, and there is a visible item T-card for each row.
Master Bond (Hackensack, NJ) had developed a thermally-conductive epoxy system that is designed to mitigate the issues associated with tightly-packed components and miniaturized electronic circuits. With a thermal conductivity of 22 BTU/in/ft²/hr/ºF and serviceability from -60 to 400°F, the EP21ANHT delivers in demanding microelectronic applications, according to the company.
Thermadyne Industries (St. Louis, MO) is expanding its WeldSkill product line — through its Tweco brand — to include a series of durable MIG guns. The new products include 125-amp, 140-amp, and 220-amp guns that are ideal for metal working, job shops, and maintenance and repair applications, according to the company.
Capital Safety (Red Wing, MN) has launched the latest product in its Delta harness line from DBI-SALA, which provides premium comfort and ease of use. The newest full-body harness has an improved ergonomic fit, lighter-weight buckles, and high-strength webbing. The harness also uses a No-Tangle triangle pattern, which creates a frame that allows the harness to easily fall into place when worn, and maintains an ideal spacing of shoulder straps to eliminate rubbing and chafing.
Large diameter shaft collars, which can be single point threaded to customer requirements, are now being offered by Stafford Manufacturing Corp. (North Reading, MA). The collars feature bore sizes up to 16” I.D, along with a variety of O.D. sizes. Customers can specify the collars to be threaded with bearing-, ACME-, stub ACME-, UNC/UNF-, and multi-start threads.
Tracer Products (Westbury, NY) has unveiled the new Tracerline TP-8690 OPTIMAX 3000, which is a portable, blue light LED fluorescent leak detection flashlight. With a focused beam, the OPTIMAX 3000 makes finding air-conditioning and fluid leaks easier than ever. The super-hi-flux LED technology delivers 15 times brighter leak detection light over regular LED lamps.
Allegro Industries (Garden Grove, CA) is offering a number of back-supports, wrist supports, kneepads, and ankle and elbow supports, according to the company. The wrist supports address the problem of carpal tunnel syndrome (CTS) with five different designs, with each one made to help maintain a neutral position at the wrist while allowing for full movement of the hand and fingers.
The Dodge Steel-Housed S-2000 HD spherical roller bearing from Baldor Electric Company (Fort Smith, AK) features an economical set screw shaft mount with a cast steel housing specifically designed for heavy-duty applications. The S-2000 HD bearings are available in pillow block and flange configurations, and are designed with a high-capacity, double row spherical bearing element that provides excellent misalignment tolerance.
Thermal Arc (St. Louis, MO) has introduced its most versatile arc welding equipment: the Thermal Arc Portable DC Welder Series. The series, which includes the 95S, 161S, and 201S, offers 95 to 200 Amps of welding power. The 161S Portable DC Welder is designed for light industrial projects, with 110 Amps on standard 115-volt circuits for stick and TIG welding.
The new Precision Safety Gun from EXAIR (Cincinnati, OH) is lightweight and comfortable to operate during periods of extended use, according to the company. The small diameter nozzle and extension fit into tight spaces while packing the punch of a strong blowing force, and the sleek profile works with small or large hands.
Gage Bilt (Clinton Township, MI) is launching a solution meant for hard-to-reach fastener applications through ¼-inch diameter. The MGL08-713-58RA heavy duty right angle nose assembly will install ¼-inch Magna-Loks® and Hemlocks®. Gage Bilt also offers a unique right angle nose assembly for MS Blind Bolt, NAS Blind Rivet, UAB, Bulb-Tite, and many more.
Parker PAGE International Hose (Fort Worth, TX) has developed the Stainless Steel Braided Convoluted Hose Assemblies in SCW and SCWV designs. The tubing in these assemblies is made from virgin PTFE in natural or static dissipative style in order to provide better flex life. According to the company, the hoses show no signs of stress cracking after 1 million cycles of flex testing.
Greenlee (Rockford, IL) offers the 555 series benders and the 855GX IntelliBender. According to the company, they are designed to make consistent and accurate bends in EMT, IMC, Steel Rigid, Aluminum Rigid, Stainless Steel Rigid, and PVC Coated Steel Rigid conduit. The patent pending solid-state control system uses current-limiting technology to protect the motor and on-board electronics from a variety of job site power sources, like generators and temporary drops, as well as eliminates arcing and the potential for relay failure.
The VISE-GRIP curved jaw locking pliers from Irwin (Phoenix, AZ) feature a self-energizing lower jaw. According to the company, the jaw tightens for maximum grip as torque is applied to the tool. They are available in two core models: Fast Release, with a one-handed, triggerless release and anti-pinch, non-slip ProTouch™ Grips; and Original, with a classic trigger release.
The Instapak RC45 foam from Sealed Air (Danbury, CT) provides users with a plant-based, renewable-content packaging form that is ideal for light-duty packaging applications. The RC45 foam contains 25 percent renewable content in the finished foam, providing a reduction in the use of petroleum-based raw materials.
The Monolec Extend EM Grease from Lubrication Engineers, Inc. (Fort Worth, TX) helps bearings run cooler and last longer, along with increasing efficiency and mechanical stability. According to the company, it is ideal for severe conditions, where extreme temperatures and high speeds are present.
Pres-On (Addison, IL) has developed the PBWMF-4 white masking film, which can help prevent glass, auto trim, clear-coated aluminum and other polished surfaces from being scratched during manufacturing, shipping, or installation. PBWMF-4 is a 3.0 mil polyolefin film coated with a removable acrylic adhesive, and removes cleanly from most surfaces up to one year after deployment, depending on the application.
A line of high-temperature, high-gloss, and VOC-compliant coatings that provide a porcelain-like appearance for metal surfaces is now available from Dampney Company, Inc (Everett, MA). The Thurmalox 8800 Series Heat Resistant High Gloss Coatings are silicone-based baking enamels that can withstand head to 500°F.
Count On Tools, Inc. (Gainesville, GA) has announced that it now manufactures the RPS Automation Selective Solder Nozzles for the Rhythm, Harmony, Opus, and SS100A range of selective soldering machines. The custom solder nozzles assist to replace labor-intensive hand soldering while eliminating defects caused by wave soldering machines.
Yardley Products Corporation (Yardley, PA) has announced that it is offering inserts manufactured using a “non-magnetic” brass material, making it ideal for applications involving electronics or medical devices. Most brass inserts are slightly magnetic due to small traces of iron in the alloy, which can cause RF inferference with sensitive electronics.
The SumiMill GOALMILL Milling Cutter from Sumitomo Electric Carbide, Inc. (Mount Prospect, IL) can finish cast iron with exceptional accuracy, according to the company. The GOALMILL provides surface finishes with tangentially-mounted inserts accompanied by easily-adjustable wiper inserts.
NKE Austria (Steyr, Austria) now offers electrically-insulated roller bearings, the SQ77, provide reliable protection against current discharge and the resulting electrical corrosion. According to the company, these bearings are ideal for electric motors, generators, and electrical machines.
The WP-50 and WP-125 Micro-Tig torches from Weldcraft (Appleton, WI) features lightweight, short torch bodies that allow pen-like welding control in the most complex applications, according to the company. The WP-50 air-cooled TIG torch provides 50 amps DC of welding capacity, and its 80-degree torch head is only 5/8” long and 3/8” in diameter.