Advertisement
Maintenance Tools & Supplies
Subscribe to Maintenance Tools & Supplies
View Sample

FREE Email Newsletter

Daily industrial news and top headlines for plant and maintenance managers

Protect Your Hands From Cuts

June 16, 2011 6:29 am | IMPO | Product Releases | Comments

Youngstown Glove Company (Agoura Hills, CA) has introduced the Titan XT glove, which is lined with Kevlar for safeguarding the top of the hand from impact. In addition, it is highly visible, cut-resistant, and durable, according to the company. The TPR knuckles across the top keep hands safe from being smashed or pinched by heavy machinery or power tools, and the Kevlar fiber equates to complete hand protection.

Magnets Filter Better

June 14, 2011 6:13 am | IMPO | Product Releases | Comments

The Eco-Mag high-intensity magnetic filter, from Magnetic Products, Inc. (MPI; Highland, MI), improves filtration efficiency by using high-power neodymium Rare Earth magnets to remove ferrous and para-magnetic contamination. According to the company, it is effective with machine tool oils, coolants, and hydraulic fluid machinery systems.

Breathe Easy And See Better

June 14, 2011 6:11 am | IMPO | Product Releases | Comments

Jackson Safety (Roswell, GA), a Kimberly-Clark Professional brand, is now offering the R60 Airmax Powered Air Purifying Respirator (PAPR), which features a NIOSH-approved HE filter for particulate contaminants that can be easily set and locked into place. It comes with fully-adjustable headgear and a welding helmet, which has a W40 series variable auto-darkening filter.

Advertisement

Make Your Cuts Mobile

June 13, 2011 6:12 am | Product Releases | Comments

The new SCW 18-A CPC Cordless Circular Saw from Hilti (Tulsa, OK) allows users to cut as they move around the job site. The Cordless Power Care (CPC) battery system provides more capacity, with an increased number of cuts per charge. In addition, the improved line-of-sight design, easy-to-read marking, easy-to-use adjustment, plus an electric blade brake.

Easy-Adjusting Hubs

June 13, 2011 6:11 am | Product Releases | Comments

Zero-Max (Plymouth, MN) is now offering Phas-Lok adjusting hubs to provide a fast and easy method for changing the phase relationship of components in a power transmission system. The Phas-Lok provides an accurate, mechanical adjustment within a 24° range (±12°) and they eliminate the need to disconnect or remove drive components in order to reposition drive components.

Tougher Than Tough Cables

June 13, 2011 6:10 am | Product Releases | Comments

Meggitt Sensing Systems (San Juan Capistrano, CA) has introduced the Endevco hardline cable assembly, which offers high-reliability performance to 900°F in support of high-temperature measurement requirements. It has a hermetically-sealed design for high resistance to corrosion, humidity, and other harsh environmental conditions.

Prevent Cabling Scratches

June 10, 2011 6:26 am | Product Releases | Comments

The new Catamount Twist Tail Cable Tie from Thomas & Betts (Memphis, TN) allows the user to remove the tail end of the tie without the use of tools. The design allows the user to simply bend and twist off the tail after installation, leaving no sharp edges to scratch cables or hands. The system is available in white or ultraviolet-resistant black 6.

Cordless, High-Speed Grinders

June 9, 2011 7:18 am | Product Releases | Comments

Makita (La Mirada, CA) had added to its line-up of 18V LXT Lithium-Ion tools, which now includes more than 40 cordless products. The 18V Lithium-Ion Cordless 1/4” Die Grinder (model LXDG01) combines speed and portability in a compact size, according to the company. It offers 25,000 RPM speeds for faster grinding, and weighs only 4.

Advertisement

Pivot For More Flexibility

June 9, 2011 7:16 am | Product Releases | Comments

Hyde Tools (Southbridge, MA) had developed the HYDE Pivot Nozzle Wand for gas pressure washers, and is now introducing an electric version of the wand. The new product comes with four connectors and fits virtually any major brand of electric pressure washer. According to the company, the wand allows the user to step back, stay dry, and reach into every crack without contortion.

Prevent Nasty Spills

June 7, 2011 7:41 am | Product Releases | Comments

Heavy-duty Tear Down Benches from Shure Manufacturing Corporation (Washington, MO) eliminate unsafe spills while speeding-up work on transmissions, small engines, and hydraulic systems, according to the company. They have a heavy-duty top with a 1/2” lip on all sides, plus all-welded adjustable height legs with four swivel casters.

Smarter Valve Locks

June 7, 2011 7:40 am | Product Releases | Comments

Netherlocks (Houston, TX) is now offering mechanical valve interlocks that eliminate human error to ensure that critical valves are locked in the proper position. The interlocks are operated with two color-coded keys, which control the open and closed positions of a valve while communicating the current state.

Tough Metal Putty

June 6, 2011 6:45 am | Product Releases | Comments

The Hi-Temp Lab-metal one-component metal putty from Alvin Products (Everett, MA) requires no mixing, applies easily, and can be sanded or painted. According to the company, it can withstand temperatures up to 1,000°F. In addition, it is suitable for smoothing welds and filling cracks, dents, or voids, and it will not shrink.

Quicker MIG Guns

June 3, 2011 6:29 am | IMPO | Product Releases | Comments

Tregaskiss (Windsor, Ontario, Canada) has announced that its QUICK LOAD Liners will now be standard on TOUGH GUN and TGX Semi-Automatic MIG Guns as of July 2011. The QUICK LOAD liners are installed from the front end of the MIG gun, and because there is no need to cut the welding wire, there is less unnecessary downtime and cost.

Advertisement

High-Pressure Tank Cleaning

June 3, 2011 6:28 am | Product Releases | Comments

The TankJet 190D motor-driven tank cleaner from Spraying Systems Co. (Wheaton, IL) provides 180° downward coverage when removing sticky residues/skim line and heavy sludge from the bottom and shadow areas of tanks. The system operates at pressures of up to 1,000 psi and uses high-impact solid stream nozzles to clean tanks up to 34’ in diameter.

Cut Almost Anything

June 3, 2011 6:27 am | Product Releases | Comments

Milwaukee Electric Tool Corporation (Milwaukee, WI) has launched the new 14” Abrasive Cut-Off Machine, with a 15 Amp, 4 horsepower motor. The tool offers a 5” max cut capacity to handle materials such as bundled drywall track, angle iron, conduit, pipe, channels, tubing, and rebar.

Compressed Air Vacuuming

May 31, 2011 7:27 am | Product Releases | Comments

The 15 gallon Nortech vacuum is now available from Guardair Corporation (Chicopee, MA), and is powered by compressed air. The Nortech vacuum can produce 60 scfm of vacuum flow, and 213 scfm in lift. According to the company, the vacuums offer safety, durability, and easy maneuverability by hand.

Plumbing-Quality Grease

May 31, 2011 7:26 am | Product Releases | Comments

Hercules Chemical Company, Inc. (Passaic, NJ) has announced the availability of its Plumbers Silicone Grease, which lubricates and prevents corrosion on valve stems, faucets, ballcock linkages, and other places where waterproof grease is needed. It provides high heat resistance of -40° to 400°F for use in a broad range of applications.

No More Sanding Dust

May 26, 2011 7:57 am | Product Releases | Comments

Dynabrade, Inc. (Clarence, NY) has introduced a new series of air-powered Vacuum Disc Sanders, which allows for efficient coatings removal with the capture of the actual contaminants to the vacuum source. The new tool line features 2”, 3”, 5”, and 7” sanders for smooth operation, while the Vacuum Shroud diverts dust and debris.

Print Labels On The Go

May 26, 2011 7:53 am | IMPO | Product Releases | Comments

DuraLabel (Portland, OR) has launched a new portable, fully-integrated label printing system called Toro, which combines a full-sized flip-down keyboard, tilting touchscreen, and OSHA-ANSI compliance software, and a thermal-transfer printer. According to the company, the Toro does not need IT support or connectivity to a computer.

Shims In All Sizes

May 26, 2011 5:28 am | Product Releases | Comments

The Stainless Steel Arbor Shims from Precision Brand Products, Inc. (Downers Grove, IL) are available in 18 thicknesses in 12 different I.D/O.D. combinations. The shims are corrosion-resistant and can be used for fast, accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.

Smoother-Rolling Bearings

May 26, 2011 5:27 am | Product Releases | Comments

NKE (Clifton Park, NY) is introducing bearing solutions for industrial gearboxes with spherical roller and taper roller bearings, along with angular contact and deep groove ball bearings. The roller bearings are offered in more than 3,000 different designs and versions, suitable for high radial loads and moderate-to-high speeds.

Environment-Beating Lubricants

May 24, 2011 6:44 am | IMPO | Product Releases | Comments

The HV Switchgear Lubricant from CRC (Warminster, PA) is a one-step lubricant and corrosion inhibitor for metering distribution and substation-class switchgear contacts. The non-flammable formula penetrates to coat contacts and provides corrosion protection, while the PowerJet spray nozzle allows application from a greater distance.

Diamond-Studded Grinders

May 23, 2011 9:28 am | Product Releases | Comments

CGW-Camel Grinding Wheels (Niles, IL) has introduced a line of diamond wheels engineered for demanding metal applications, with a high concentration of diamond grip, a solid steel body, and an advanced brazing process. The longer-lasting life spans allow for increased production times and lower cost ratios.

Stop Porosity

May 23, 2011 9:27 am | IMPO | Product Releases | Comments

The AlumiSeal brush-on methacrylate compound, from IMPCO Inc. (East Providence, RI), is formulated for sealing porosity in aluminum parts and welds that will contain liquids or gases under pressure. The low dynamic viscosity enables it to wick deeply into pores and between close-fitting non-ferrous metal surfaces.

Six Jaws For Better Grip

May 19, 2011 7:44 am | Product Releases | Comments

Northfield Precision Instrument Corporation (Island Park, NY) has introduced their Model DPH-600W chuck, which is a 6” diameter, 6-jaw diaphragm model that has special jaws and six “air detect” holes for part seating confirmation. The chuck is counter-balanced to maintain exact jaw for up to 6,500 rpm.

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading