The new AeroVent 1 from Newstripe, Inc. (Aurora, CO) can deflate aerosol cans to recyclable scrap metal. It can quickly puncture and drain a variety of aerosol can sizes, reducing the cost of hazardous waste disposal. A smaller version of the AeroVent 3, it is designed for users that have smaller quantities of cans in a variety of sizes.
The STAR TECK EXTREME DIRECTOR Cable Fitting from Thomas & Betts (Memphis, TN) is an adjustable, range-taking fitting, used to terminate metal-clad and Teck cable. Featuring a swashplate design, the fitting adjusts from 90 to 180 degrees and is available in half- and three-quarter inch NPT hub sizes.
NORDOT Adhesive #34P-4 from Synthetic Surfaces Inc. (Scotch Plains, NJ) is a new one component outdoor adhesive that was designed to install and repair synthetic turf and other outdoor surfaces in widely variable and hostile weather conditions. Allowing for year-round installation and repair, the adhesive can be applied to a dry or damp surface at any temperature and humidity in which a mechanic can work.
Hydrovane (Redditch, Worcestershire, UK) has announced its new Hydrovane V Series line of rotary vane compressors. Small, quiet, and affordable, Hydrovane compressors are all direct drive with no belts or gears to maintain. They operate at 1760 RPM’s for low stress, noise, and long compressor life.
The new A1000 Variable Speed Drive from Yaskawa America Inc. (Waukegan, IL) is compatible with interior and surface permanent magnet motors and provides up to 200 percent torque. The user-friendly configuration includes a multi-language LCD display, parameter storage, and application presets.
The Viega ProPress system from Viega (Wichita, KS) is now available for joining stainless steel piping in sizes from ½-inch to 4-inches using press technology to secure pipe connections in under seven seconds. The system of stainless steel pipe, valves, and fittings provides a flameless way for water-tight and gas-tight stainless steel joining.
Akro-Mils (Akron, OH) announces the expansion of its line of heavy-duty 19-Series Steel Storage Cabinets to include five drawer colors—black, blue, gray, red, and yellow. Ideal for storing, consolidating, and organizing small parts, these cabinets are available in six models and feature a heavy-duty welded steel frame.
LEVALIGN EXPERT from Ludeca Inc. (Doral, FL) is a flatness and leveling measuring system with an automatic rotating laser. The LEVALIGN EXPERT provides an accurate and easy to use method for the measurement of flatness and straightness of machine bases and foundations, split machine casings, and flatness and parallelism of circular, rectangular, and odd-shaped flanges.
Gateway Safety (Cleveland, OH) introduces Swap, a new eyewear solution that can easily switch spectacles to goggles with a snap. Each pair includes both temples to wear it as safety glasses and a head strap to switch to goggles. The Swap frame is fully lined with soft, smooth foam that blocks dust and debris.
Formulated for electrical potting and encapsulation applications, Master Bond EP36AO from Master Bond (Hackensack, NJ) combines high thermal conductivity with thermal stability. It is serviceable from -80°F to 500°F, has a tensile strength of over 2,000 psi, and can adhere to metallic and non-metallic substrates.
AutomationDirect (Cumming, GA) now offers Wera standard, insulated, and miniature screwdrivers in six-piece sets. Screwdriver handles are marked with a screw symbol and the tip size for easy identification. A laser treatment provides a microrough surface on the tip of the blade for less slipping.
The new angle grinder from Metabo (West Chester, PA) is ideal for cutting, grinding, and deburring applications. The W680 4½ inch angle grinder features a 6.2 amp motor with 680 watts of power, 14 inch-pounds of torque, and a no-load speed of 11,000 rotations per minute. Weighing 4.
Swagelok (Solon, OH) has added five new tools to its orbital welding and tubing equipment lines. The new product selection includes four new tube facing tools and one cutting tool. The tools are intended for use with 316 stainless steel, carbon steel, and most nickel-based alloys. The new tube facing tools are available in four different sizes (TF16, TF24, TF40, and TF72) and feature coated tool bits with cutting edges and built-in electronic speed regulation.
Xuron Corporation (Saco, ME) announces Xuron Model 496 split ring pliers, designed for fishing lure manufacturers and fisherman alike. Model 496 features a curved catch tip to open the ring with a secure grip for installation and removal. These split ring pliers can be used for all size split rings down to #00.
A new plastic welding kit is now available from Master Appliance Corp. (Racine, WI). The new Master Proheat kit, model PH-1400WK is built around the Master Proheat LCD model PH-1400 dial-in electronic heat gun. The gun offers ten degree increment temperature control from 130°F to 1,000°F and control of airflow from 4 to 16 CFM.
Hilti (Tulsa, OK) has developed a new TE-CX bit that features a gradient carbide head designed to prevent catching on rebar to extend the life of the bit. The TE-CX bits were constructed for drilling holes for medium to heavy-duty anchors in concrete, masonry, and other natural materials.
Matco-Norca (Brewster, NY) offers a line of pump and well products for use in the water quality industry. Products for water quality applications include insert fittings, tank tees, in-line check valves, pressure relief valves, bronze pitless adapters and drop well couplings. Other pump and well products include brass, cast iron and PVC valves, and galvanized black and brass fittings and nipples.
Seatek (Stamford, CT) has introduced a new model into its Roto-Skinner line. The rotary cutting RSK-185 was primarily designed for armored umbilical cables used on underwater remotely operated vehicles and is able to cut through high strength steel wires. This cordless cutting tool is powered by 18V lithium-ion batteries and the pre-set concentric stop with the abrasive wheel penetrating mechanism prevents core damage.
Master Bond (Hackensack, NJ) has developed a new epoxy, Master Bond EP21LV, which features a low viscosity and improved electrical insulation properties. This system is unique in that the rigidity of its cure can be altered by adjusting its mix ratio, giving users the option to get a more rigid cure with enhanced machinability, for example.
Riten Industries, Inc. (Washington Court House, OH) developed Extra-Light live centers specifically to turn or grind parts weighing as little as two ounces. According to the company, these parts are often too flimsy to turn the larger bearings found in typical live centers, resulting in galling or excessive wear on the tip of the live center.
Graphite Metallizing Corporation (Yonkers, NY) has announced the availability of additional sizes of the GRAPHALLOY 453 family of self-lubricating bushings, which are intended for use in severe industrial applications where temperatures reach 750°F. According to the company, they are designed to operate without lubrication.
The Metallized Carbon Corporation (Ossining, NY) has developed cast iron pillow blocks and flange blocks with self-lubricating, carbon-graphite bearing inserts for applications where oil/grease lubrication cannot be used. According to the company, the bearings provide and a long, maintenance-free life in high-temperature applications were grease would melt or carbonize.
Robinson Rubber Products (Minneapolis, MN) has developed several new ways to bond molded rubber components to parts, which can eliminate secondary operations and extra components, plus reduce weight and costs. The company can use 20 engineering-grade polymers and 1,500 unique formulations to develop a custom formula for a user’s need.
An expanded line of high-temperature hose is being offered in several temperature ranges by Flexaust (Warsaw, IN). The Flex-Lok High Temperature Hoses are made from materials that are locked around a galvanized or stainless steel metal clip and mechanically crimped in a continuous process.
Youngstown Glove Company (Agoura Hills, CA) has introduced the Titan XT glove, which is lined with Kevlar for safeguarding the top of the hand from impact. In addition, it is highly visible, cut-resistant, and durable, according to the company. The TPR knuckles across the top keep hands safe from being smashed or pinched by heavy machinery or power tools, and the Kevlar fiber equates to complete hand protection.