The Ultra V Series and VS Series solids-handling, self-priming centrifugal trash pumps from Gorman-Rupp (Mansfield, OH) offer up to three times the pressure and up to 60 percent more performance. Available in a variety of pump station configurations or stand-alone 3-, 4-, and 6-inch sizes, they are suited for a variety of applications.
Sprayon Products (Cleveland, OH) has added the new SP 9000 Heavy Duty Spray Adhesive to its line of industrial specialty chemicals. The new adhesive can be used to bond plastic, glass, and laminates to tables, cabinets, and shelving. Featuring variable volume controlled, lace spray pattern for stronger bonds and spray control, the spray also contains no ozone-depleting CFCs.
The IDEA stepper motor drive platform from Haydon Kerk Motion Solutions, Inc. (Waterbury, CT) now has the capability of communicating using an RS-485 data protocol. Industrial equipment, such as stepper drives, motor drives, and servo systems, can now have the advantage of long data transmissions with resistance to electrical noise.
Spirax Sarco (Blythewood, SC) has announced the Fig 34HP cast carbon steel Y-type strainer, rated to ASME Class 600 standards. The FigHP is designed to protect equipment from pipeline debris such as scale, rust, jointing compound, weld metal, and other solids in flowing liquids or gases. This new range of strainers has a large screen area providing high CV and low pressure drop as well as making the frequency of blowdown for cleaning considerably reduced.
Xuron Precision Cutters from Xuron Corporation (Saco, ME) come in a wide range of standard models and can also be custom designed to match specific OEM assembly and maintenance applications. The precision cutters feature the Micro-Shear by-pass shear cutting head which results in square, clean cuts with no spikes and requires less pressure than compression-style cutters.
Stafford Manufacturing Corp. (Wilmington, MA) offers a line of large bore shaft collars featuring bore sizes up to 14 inches. Offered in one- and two-piece clamp-type configurations with smooth- or threaded-bores, they are suited for heavy-duty drive system applications. These split shaft collars are supplied with one or more alloy socket cap screws for optimum clamping power.
The Magnalight LED10W-6R-HT from Larson Electronics (Kemp, TX) is a durable and compact LED light that offers high light output and a combined handle and magnetic mounting system to provide both mobility and secure mounting of the unit on any surface that will accept a magnet. This lightweight LED light produces 5,400 lumens and is capable of throwing a light beam over 600 feet, yet uses less than half the amount of electrical power as comparable incandescent lamps.
New DFense Blok Quick Patch from ITW Devcon (Danvers, MA) is the only ceramic bead-filled wear and abrasion epoxy formulated for emergency repairs to processing equipment, even in severe conditions. With a working time of 4 minutes and a fast cure time (functional cure in just 30 minutes), DFense Blok Quick Patch is ideal for the emergency patching and repairing of holes, leaks, and cracks.
New DAYLube high performance grease from Dayton Progress Corporation (Dayton, OH) uses nano-ceramic particles which act as sub-microscopic ball bearings to provide continuous lubrication to steel surfaces, and is especially suited for metalworking applications. With a low coefficient of friction at all temperatures, chemically inert DAYLube is also environmentally friendly.
SPIROL International Corporation (Danielson, CT) has expanded their disc spring product line to include larger sizes per DIN 2093 Group 2 (now available up to 250 millimeters in diameter) and a full range of stainless steel discs. SPIROL disc springs’ performance characteristics are predictable and the minimum life cycle can be calculated.
The StacoVAR Mini from Staco Energy Products (Dayton, OH) is an automatic power factor correction bank which maintains the desired power factor level by using the microprocessor based controller to adjust to system load conditions. Rugged metalized poly-propylene dry type capacitors are placed in a compact enclosure, allowing this bank to fit in a small footprint.
The new CYCLO COOL 900 and 5000 series synthetic coolants from MAG (New York, NY) are additive free, low foaming, and specially formulated for machining titanium, Inconel, beryllium copper, hardened steels, stainless steels, and other superalloys. Developed for the aerospace industry, the new coolants use unique synthetic formulations to provide boundary lubricant properties, while penetrating the heat barrier in the cutting zone, even at lower pressure (300 to 400 psi), to absorb heat from the tool and part, and minimize chemical reactions between tools and workpieces.
The Megamat RS Vertical Carousel from Kardex Remstar, LLC (Westbrook, ME) features a new intelligent drive design, providing part and supply operations a more reliable vertical carousel requiring less maintenance and lower energy requirements. The new drive design is made up of a drive track, carrier arms, transportation chain, drive motor, drive chain, and hand crank.
Master Bond EP21FL from Master Bond (Hackensack, NJ) is a two part epoxy resin system that features low to moderate viscosity. It is well suited for potting, coating, and sealing electronic assemblies and can bond dissimilar substrates with different coefficients of expansion. This adhesive has a service temperature range of -60 degrees F to 250 degrees F.
Meggitt (Germantown, MD) has introduced a new side exit, low profile, dual output accelerometer with a built-in temperature sensor. The side exit 787T has the capability of monitoring in low clearance areas and can accommodate cable runs from any angle. Designed with a standard 3-pin MIL-C-5015 connector, the 787T is compatible with cabling infrastructure found in most industrial locations.
Mitsui Seiki (Franklin Lakes, NJ) has introduced the HU63-T 5-xis CNC Machining Center for gas turbine power generation systems. New features include a 31.5 inch work diameter capacity on its vertically oriented table and a 660 pound fixture weight capacity. It also includes a variety of increased axis stroke options, high torque spindles, and the latest Fanuc 30iM control with enhanced features for 5-axis simultaneous machining.
The new generation of SKF SPEEDI-SLEEVE from SKF USA Inc. (Lansdale, PA) introduces an advanced and cost-effective sealing solution for worn or damaged shafts on rotating equipment. These easily installed sleeves provide a sealing surface without requiring shaft disassembly or specifying a new size of replacement seal.
Jet Edge, Inc. (St. Michael, MN) has introduced the Mid Rail Gantry Model MR513 water jet cutting machine. Capable of processing material up to 5’x13’, the machine is sized especially for fabricators, machine shops, and stone and tile shops. It cuts complex parts from virtually any material without creating a heat-affected zone (HAZ).
SJE-Rhombus (Detroit Lakes, MN) has enhanced the design of the Double Float Master pump switch for use in a wider range of applications. The new mechanical pump switch has an enhanced pumping range of 3 to 48 inches and an increased amp rating of 15 FLA at 120 VAC or 240 VAC. The Double Float Master pump switch consists of two narrow-angle mechanical floats and a splice tube, which contains a holding relay that enables the floats to function in series.
The DP8891 series of waterproof digital thermometer from Omega (Stamford, CT) features a wide temperature range and can be used as a portable unit or a wall mounted large LCD meter. This battery powered unit is Celsius and Fahrenheit switchable. The meter and probe offer waterproof (IP67) rating.
The new Cooper Bussmann (St. Louis, MO) four-channel array ESD overvoltage suppressor device provides fast response and reliable ESD protection for data signals in any application requiring input/output, antenna, audio/video ports, or data lines. The low 0.1pF capacitance protects data without distorting signals.
CRC Industries (Warminster, PA) has introduced TAC 2 Adhesive Chain Lubricant, a lubricant which will bond to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that causes metal fatigue. It contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity.
SpectraQuest (Richmond, VA) has introduced a full featured Wind Turbine Simulator (WTS) for education in wind turbine technology from power generation to operation. The device provides an ideal platform for teaching the fundamental principles of wind energy conversion to electricity, energy storage, control system, instrumentation, operation, and maintenance of a wind turbine.
Metabo Corporation (Westchester, PA) has introduced its first professional-grade cordless angle grinder, complete with a rotating battery pack, making it ideal for grinding and cutting applications in hard to reach areas. The W18LTX cordless angle grinder is part of the PowerMasterSeries of 18 volt lithium-ion cordless power tools.
Briarwood Products (Cleveland, OH) has introduced the 18 inch and 24 inch Microfiber Surface Cleaning Tools, designed for any surface cleaning application. The Microfiber Cleaning Tools are durable, easy to clean, and can fit any standard threaded handle. With an easy 360 degree swivel radius, these tools are able to slide under furniture and equipment and are also able to fit into tight corners, increasing efficiency and preventing injury.