When people look to chemical threadlockers, they are almost always looking to secure a troublesome fastener from vibrating loose. However, a key advantage of anaerobic threadlockers often overlooked is their ability to seal the threaded joint from leaks.
Point-of-use dispensing technology has gained in popularity for many manufacturers who have struggled for years with the tracking of MRO products. Manufacturers and distributors alike can recount horror stories of contending with hundreds of SKUs of something as simple as work gloves.
A typical manufacturing plant today will have thousands, or even many thousands, of electrical connections on both fixed equipment and moving machines. And it’s just a matter of time before some of those connections fail or wear out, bringing production machines to a dead stop.
In this issue, Ford readies its Kansas City location for 2,000 new jobs, a connector expert explains how to prevent downtime, experts discuss proper product selection for threadlocking and gasketing, and more.
The median age of the labor force is anticipated to increase rapidly, with one-third of the U.S. labor force turning 55 by 2015. This may have far-reaching implications on the number and type of work-related injuries experienced. Most companies are not prepared for these changing demographics.
The fouling of heat exchangers in processing industries is a chronic operating problem. Costs due to additional fuel consumption and maintenance, loss of production, etc. have been estimated as 0.25 percent of the GNP of industrialized countries. EWT offers companies an environmental, effective, and cost saving method of reducing fouling on heat exchangers which can only prove a win, win, win scenario for all.
EMO Hannover returns today through September 21,2013. International producers of manufacturing technology are exhibiting their metalworking products, solutions and services under the theme “Intelligence in Production” at the world's leading metalworking trade show.
Industrial Automation North America made its debut as a co-located show with IMTS in 2012. It will make its return in 2014, showcasing the best in process, factory, and building automation. Larry Turner, President & CEO of Hannover Fairs USA, explains why they have decided to bring the Industrial Automation NA and MDA NA to IMTS 2014 and what you can expect to see there.
With insurance, you want to cover only what you need and can afford – nothing more. It’s the same with your spare parts inventories. Of course, with your spare parts, it is important to cover the risk but it is also important to be able to justify everything on the shelf – holding only what you need, and can justify, and nothing more. That is the key to effective spare parts risk management.
Automated and robotic machines for manufacturing operations can pose design challenges. The expansion of automation into broader applications has spurred demand for smarter, more efficient drives, controls and software tools. Staying ahead of the technological curve requires leveraging state of the art tools.
Just like your car insurance is a way to minimize the financial consequence of a car crash and backing up your files is a way to minimize the consequence of a computer crash, spare parts inventory is a way to minimize the consequence of an equipment crash. It’s all about risk management.
EYE Lighting International, a leading manufacturer of lamps, luminaires, controls, and related lighting products, has taken its communications online through Facebook, Twitter, LinkedIn and YouTube videos to engage with its customers. Through its digital media strategy, EYE Lighting will build stronger customer relations and improve its ability to meet its client’s needs for both its commercial and utility lighting products.
Industrial lighting systems although performing the same basic role as lighting in any other setting by providing illumination in areas where available light is inadequate, must also address a host of factors that never come into play in common non commercial/industrial settings.
The electronic devices used to test and analyze electric motors and other equipment have become much more powerful than in the past. Yet, in many instances these sophisticated devices have also introduced a high degree of complexity for users, requiring that highly trained and experienced personnel perform the testing.
This FREE symposium, held on Sept. 18, 2013 from 8:30am-2:30pm, will include presentations from industry experts and live product demonstrations. The agenda will include market trends, automating your system with robotics, and live product demonstrations.
Seals for processing equipment play vital roles in protecting bearings and lubricants. From the perspective of managing lubrication, a seal’s primary purpose will be to retain lubricant and keep contaminants from degrading or harming the grease.
In the last twelve months, the compressor industry has seen the release of several innovative, patented air compressor technologies that significantly reduce energy consumption. These recent advancements derive from improvements throughout the compressor design and contribute to dramatic increases in energy efficiency.
Few industrial environments can match the diverse and difficult operating conditions encountered in the food and beverage processing industries. Equipment often will be exposed to contaminants, frequent washdowns can degrade machinery and may cause lubricant leakage, and other adverse influences can combine to impact an operation’s lines and productivity.
DEWALT’s lead design engineer for drills was tasked with designing a high power right angle drill that is lightweight, compact, and portable. As is common with hand power tools, the goal with the design was to maximize performance while minimizing the size of the tool.
In today’s modern assembly facilities, the design and flexibility of the workstation is critical to maintain quality, workflow, and ergonomics. Unlike the old, static, welded frame workbenches of the past, modern workstations incorporate a modular, flexible, adaptable design, with a wide variety of options that allows the end user tremendous flexibility in reconfiguring the furniture to meet an ever changing production environment.
Operation Homefront has accepted a generous $50,000 donation from Klein Tools to support ongoing efforts to provide emergency financial aid and other assistance to military members and their families.Klein Tools, a leading U.S. hand tool manufacturer, originally pledged to donate $25,000 to Operation Homefront this year in conjunction with the company’s Limited Edition Camouflage Pliers Promotion.
Our fourth annual Energy Intelligence Report has been designed to spark some ideas for cost savings measures, as manufacturers continue to face tightening budgets and competitive pressures. We hope you can find something of value as you look at your own plant floor and try to determine where to start.
Suburban Manufacturing has been in business more than 33 years and has a gleaming, state-of-the-art 30,000 square foot CNC machine shop. According to vice president Brian Nuibe, Suburban is a “true job shop. We have vertical machining centers and horizontal machining centers, single- and multi-spindle CNC lathe machines, saws, hones, sand blasting, part marking — a huge array of operations.”
Dust, water, corrosive chemicals, and airborne particles are severe hazards to many manufacturing and production facilities. Any environment where critical electrical equipment is exposed puts this equipment at risk. This critical equipment includes your motor disconnects and switched receptacles.
Rust-Oleum Corporation today announced that it has acquired certain assets of XIM Products, Inc., a producer and marketer of specialty primers and coatings based in Westlake, Ohio. XIM offers a range of primers offering excellent adhesion to difficult-to-paint surfaces, as well as other problem-solving coatings. Their brands, including Peel Bond, UMA, and TILE DOC are widely available in paint stores.