Maintenance Tools & Supplies
Subscribe to Maintenance Tools & Supplies
View Sample

FREE Email Newsletter

Daily industrial news and top headlines for plant and maintenance managers

Pink Pumps For Awareness

October 5, 2012 2:56 pm | by Vaccon | Product Releases | Comments

J Series pumps are a single stage venturi vacuum pump that allows ingested contaminants to flow through the pump without clogging ensuring continuous operation.

Armed Workwear

October 5, 2012 2:52 pm | by Armed Workwear | Product Releases | Comments

Armed Workwear’s new pants will save wearer’s knees with their built- in, removable knee pads, says the company, while nine custom pockets will stop the “hunt for tools game.”

Nitrogen, Oxygen Generators

October 5, 2012 2:47 pm | by Atlas Copco | Product Releases | Comments

Nitrogen and oxygen generators allow manufacturers to generate their own gas supply on site and providing greater economies of scale for cost savings.


Wound Field Motors

September 28, 2012 11:28 am | by Ohio Electric Motors, Inc. | Product Releases | Comments

Each motor size has outputs ranging from 2 to 10 HP with speed capabilities from 500 to 4,000 RPM.

HYDE Turbo Nozzle

September 28, 2012 11:24 am | by HYDE | Product Releases | Comments

The new Turbo Nozzle is a powerful new ceramic tip designed for blasting and removing stubborn and encrusted stains.

Brush Deburring Tools

September 28, 2012 11:21 am | by Weiler Corporation | Product Releases | Comments

The black nylon filaments are co-extruded with an engineered ceramic abrasive grain, providing cut rates up to 400 percent faster than silicon carbide or aluminum oxide filaments.

Panther Welder Gloves

September 28, 2012 11:18 am | by Galeton | IMPO | Product Releases | Comments

Panther Premium Leather Welder’s Gloves feature a thick lining and a double-layer leather thumb joint to protect worker’s hands from heat and hot tools.

Waterproof Workstation

September 28, 2012 11:05 am | by Comark Corporation | Product Releases | Comments

Comark’s NEMA 4X Workstation is completely sealed against the elements, corrosion resistant, and constructed out of rugged stainless steel.


Hazard Protection Knits

September 28, 2012 11:04 am | by Workrite Uniform Company, Inc. | Product Releases | Comments

These knits are dual hazard, protecting against both arc flash and flash fire. Workrite is having them certified to both NFPA 2112 and NFPA 1975, and they meet Hazard Risk Category 2 for NFPA 70E.

QuickRack Transport Frame

September 28, 2012 11:00 am | by igus | Product Releases | Comments

The QuickRack modular transport-and-assembly frame is made from telescopic support and brace modules that permit length adjustments at any point.

12 Ounce Aerosol IPA

September 28, 2012 10:53 am | by Techspray | Product Releases | Comments

99.8 percent pure anhydrous (minimal water) IPA is excellent for defluxing, fiber optics maintenance, stencil cleaning, tool cleaning, tape-head cleaning, and other light-duty cleaning, says the company.

Two-Jaw Air Chuck

September 28, 2012 10:49 am | by Northfield Precision Instrument Corporation | Product Releases | Comments

This chuck is modified for Spring Clamp and air open, using Nitrogen compressed gas springs in the spring clamp mechanism.

Rgrip Gripping Strength

September 26, 2012 4:49 pm | by REGO-FIX | Product Releases | Comments

The secuRgrip system has a TIR of 0.0001 inch and enables manufacturers to preset their tool heights.


OSHA Guard Safety Scale

September 26, 2012 4:30 pm | by Danray Products LLC | Product Releases | Comments

The new OSHA guard safety scale that can be used to check the openings in barrier guards during their design, installation, and inspection for compliance with Table O-10 of OSHA 29 CFR 1910.217.

Electronic Torque Wrench

September 25, 2012 11:38 am | by GearWrench | Product Releases | Comments

The product is ideal for applications requiring torque specifications that include tightening to an angle beyond a specified torque value.

Plastic Pro-Tack Welder

September 25, 2012 11:36 am | by Shark Industries Ltd. | IMPO | Product Releases | Comments

This eco-friendly welder is great for repairing virtually anything made of breakable plastic and affords users the ability to save on broken products that would otherwise have been prematurely discard.

Tube Heat Exchangers

September 25, 2012 11:33 am | by AMETEK | Product Releases | Comments

These shell and tube heat exchangers utilize highly engineered fluoropolymer resins and field-proven technical experience, according to the company.

Wenatchee Work Boot

September 24, 2012 3:01 pm | by KEEN | Product Releases | Comments

The Wenatchee features a contoured heel lock for customized fit, oil- and slip-resistant non-marking rubber outsole, and asymmetrical steel toes for superior protection and functionality.

High Efficiency Screw Compressors

September 24, 2012 2:55 pm | by BITZER | Product Releases | Comments

The company says its new high efficiency, variable speed CSV series Screw Compressor features an integrated frequency inverter, adjusted at the factory and parameterized for the highest level of efficiency.

Reel Brawny Upgrade

September 17, 2012 4:35 pm | by Coxreels | Product Releases | Comments

This new feature is an added option that strengthens the discs and the drum, preventing potential damage under increased pressure usage.

Density Systems

September 17, 2012 4:33 pm | by Dynatrol | Product Releases | Comments

Density Systems provide precise measurements while withstanding temperatures up to 300 degrees F, and the corrosive effects from caustics, acids, ammonia, sulfuric acid, hydrochloric acids, and nitric acids.

Economical Manufacturing Cells

September 14, 2012 2:34 pm | by German Machine Tools Of America | Product Releases | Comments

PV3 combines different technologies such as turning, drilling, thread cutting, milling, groove milling or grinding and gear tooth forming.

Paramount Hand Tools

September 14, 2012 2:31 pm | by MSC Industrial Supply Co. | Product Releases | Comments

Paramount hand tools are lighter, stronger, more durable, and offer several unique performance advantages for workers who rely on these essential tools, according to the company.

Pro Band Saw Blades

September 14, 2012 2:30 pm | by LENOX® | Product Releases | Comments

The LENOX Classic Pro bi-metal band saw blade features a proprietary backing steel preparation to increase fatigue life and minimize band breakage.

U-tec Tool Adapter

September 14, 2012 2:28 pm | by Heimatec | Product Releases | Comments

U-tec allows users the ability to have a quick changeover of tools on almost any lathe, using a single live tool, without having to commit to a quick-change system on the initial purchase, says the company.

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.