Metabo Corporation (West Chester, PA) has introduced a new angle grinder in the Metabo Metal Master series — the W24-180 — which is designed for cutting and grinding metal. With a 7” wheel, the tool offers 124 inch-pounds of torque and a no-load speed of 8,500 rpm. The 15 A, 4.
ZYP Coatings, Inc. (Oak Tree, TN) has announced its new “Brushable” biodegradable, oil-based lubricant/coating/paint: Keralon-B. It can be used in temperatures from ambient to 1,000°C. The lubrication is based on a combination of organic and inorganic ingredients, including Methylated Seed Oil, boron, graphite, and more.
ITW Dymon (Olathe, KS) has expanded its DYKEM CROSS CHECK Tamper Proof Torque Mark products to include five new colors: dark pink/red, yellow, blue, green, and orange. DYKEM CROSS CHECK creates a bead of color that seals nuts, bolts, fasteners, and assemblies so that changes in torque or operating settings caused by vibration loosening can be quickly determined by checking the marks for cracks, breaks, and misalignment.
Chicago Pneumatic Tool Co. (Rock Hill, SC) has been developing a 3/8” impact wrench that delivers up to 415 ft.-lbs. of torque. The CP7729’s ergonomic design features S2S technology, which allows users to change between forward and reverse with one hand in any position, making the wrench good for hard-to-reach places.
The CILS-8200/9200 metalized polyester labels from Computer Imprintable Label Systems (CILS — Burlington, MA) provides durability and resistance against harsh industrial conditions, such as abrasion, oils, grease, extreme temperatures (-196° to 388°C), chemicals, and severe weathering.
Eaton Corporation (Cleveland, OH) has announced that its UNIBAG filterbag has received the Eaton “Green Leaf” symbol for sustainability because it provides environmental advantages over standard filter bags. The felt used in the polyester contains 40 to 60 percent recycled fibers without optical white additives.
CECOR (Verona, WI) offers a small propane-powered sump cleaner (model SP50-175PL6), which delivers powerful pumping without electric outlets or air drops. A high suction lift removes coolant, chips, and sludge from the sump, forcing them through a filter that separates solids from the coolant.
The Organic HTP Oil Solidifier and Encapsulator from American Products Enterprises Corporation (Woodstock, GA) works by solidifying and encapsulating oil on contact. According to the company, HTP will transform any type of petroleum spill into a fluffy dry substance on contact. The solution works equally as well on hard and dry surfaces as it does on water, ice, snow, and more.
The most up-to-date hazardous materials regulations have been combined in MANCOMM ’s (Davenport, IA) forthcoming DOT/PHMSA Hazardous Materials Regulations, Oct. 2010 Edition . The publication will be made with RegLogic, which is a two-color graphical approach that takes the difficulty out of navigating and reading regulations, according to the company.
Acme Industrial Company (Carpentersville, IL) has announced a new thinwall threaded insert product line: the Swage-Sert. The design allows the product to be used with minimum boss requirements to help reduce weight and increase strength. The inserts are used to repair stripped, damaged, or worn out threads, but can also be deployed in original equipment to strengthen threads and extend thread life.
Penn Stainless Products (Quakertown, PA) has expanded its inventory to include large-diameter sizes of round bar through 22” diameter (in 304/L) and through 24” diameter (in 316/L). The materials conform to ASTM A479 and ASTM A182, and the addition allows the company to be the only stainless center that stocks 304/L and 316/L in their largest sizes.
Stanley VIRAX (Conyers, GA) has redesigned its industrial pressing tool — the P22+ — to make it easier to use and maintain. In addition, it uses industry-standard press fittings to make solder-less joints in copper, stainless steel, and PEX tubing. The new version has lost two pounds in weight compared to its predecessor, while a redesigned housing offers an ergonomic pistol grip, a sleek profile, and enhanced resistance to drops and shocks.
The Cynch-Lok fall restriction pole strap from Capital Safety’s (Red Wing, MN) DBI-SALA line uses a unique design that will “cynch” around a pole to limit fall distances when used correctly. The system also offers slide-in-place adjustment to fit the pole and allows climbers to adjust to the pole diameter while climbing, while the strap maximizes versatility by eliminating the need for multiple devices.
The cordless SIW 18T-A CPC lithium ion high torque impact wrench from Hilti (Tulsa, OK) packs battery performance into a rugged design for complete mobility, according to the company. The SIW 18T-A achieves an impressive number of fastenings per battery charge, all while allowing the motor to provide maximum torque when needed.
Northfield Precision Instrument Corporation (Island Park, NY) introduces their 5C Collet Chuck, which is interchangeable with their standard 4” chucks because of an identical bolt pattern. The chuck is air-actuated and uses Northfield’s standard air feed tubes (wet or dry). All components are hardened and ground to 58/63 R.
A new series of 70 wire rope isolators from Advanced Antivibration Components (AAC — New Hyde Park, NY) feature multiaxial shock and vibration protection, corrosion-resistance, and maintenance-free operation. The cable itself is made from stainless steel in a variety of sizes (1/16", 3/32", 1/8", 5/32", 3/16", 1/4”, 3/8", 1/2", 5/8", and 7/8" diameter), and the mounting plates are made of aluminum.
Melmor Associates Inc. (Niles, OH) has added a new product line, which includes platform trucks, direct drive portable blowers, chrome wire shelving and carts, casters, bulk containers, and more. The new products include the Prohanger, which is a plastic cradle that holds, hangs, and organizes extra-long parts in service trucks used by technicians.
A full range of welding end prep tools that combine a formed tool bit with an adjustable bit locking system are available from ESCO Tool (Holliston, MA) with the ESCO MILLHOG Welding End Prep Tools. The line includes several models for machining compound end preps on tube and pipe from 2” I.
Reed Manufacturing Company’s (Erie, PA) ½ horsepower, electric 5401TMSO Threading Machine centers and chucks pipe or conduit for cutting, threading, and reaming applications. The oil system uses a self-priming pump that floods the pipe with oil while threading, and the open workspace features a large, integral oil reservoir.
RIDGID (Elyria, OH) has introduced the new all-in-one CS1000 digital recording monitor, which is compatible with all RIDGID SeeSnake reels. It also consists of an upgraded LCD Pak , as well as a durable keyboard. The LCD Pak is designed for performance and durability, with a lightweight design and battery-powered mobility, and has a 12.
FCT Assembly (Milpitas, CA) has introduced its RMA250 Solder Paste, which is a rosin-based chemistry designed to provide repeatability and consistency in the printing process. The paste offers an extended abandon time and excellent soldering activity with all surface finishes, according to the company.
Seatek Company (Stamford, CT) has introduced a new model in its Roto-Split line — the RS-101B — which is equipped with an auto-clamping feature that eliminates the need for a thumb screw when cutting different sizes of AC/MC cable. Any cable from 14-2 to 10-4 or 3/8” Flex is secured just by squeezing the bottom lever, preventing the application of too much force to aluminum casing.
The Pro Polish floor polishing system from General Equipment Company (Owatonna, MN) was designed for use with popular models of single- and dual-head, low-speed surface grinders, and works well with concrete, marble, and any other surface that can be polished. The system uses a series of seven 10-inch diameter diamond-polishing pads, which have a chemistry that is specially formulated to operate at the lower rotational speeds found in surface grinding equipment.
STI Electronics, Inc. (Madison, AL) announces that its Through-Hole Solder Training Kits are an economic way to ensure each employee receives consistent skills training for through-hole component types and wire terminal attachments, which are encountered in production. The kits are updated versions of the industry-standard certification kits created for the Military Certification Programs.
Kundel Industries (Austintown, OH) has developed the istrut, which is a modular strut aluminum building system that addresses the gap between standard strut and heavy-duty structural frame. At its core, istrut has an aluminum body, which creates a structural skeleton with high strength-to-weight ratios.