FCT Assembly (Milpitas, CA) has introduced its RMA250 Solder Paste, which is a rosin-based chemistry designed to provide repeatability and consistency in the printing process. The paste offers an extended abandon time and excellent soldering activity with all surface finishes, according to the company.
Seatek Company (Stamford, CT) has introduced a new model in its Roto-Split line — the RS-101B — which is equipped with an auto-clamping feature that eliminates the need for a thumb screw when cutting different sizes of AC/MC cable. Any cable from 14-2 to 10-4 or 3/8” Flex is secured just by squeezing the bottom lever, preventing the application of too much force to aluminum casing.
The Pro Polish floor polishing system from General Equipment Company (Owatonna, MN) was designed for use with popular models of single- and dual-head, low-speed surface grinders, and works well with concrete, marble, and any other surface that can be polished. The system uses a series of seven 10-inch diameter diamond-polishing pads, which have a chemistry that is specially formulated to operate at the lower rotational speeds found in surface grinding equipment.
STI Electronics, Inc. (Madison, AL) announces that its Through-Hole Solder Training Kits are an economic way to ensure each employee receives consistent skills training for through-hole component types and wire terminal attachments, which are encountered in production. The kits are updated versions of the industry-standard certification kits created for the Military Certification Programs.
Kundel Industries (Austintown, OH) has developed the istrut, which is a modular strut aluminum building system that addresses the gap between standard strut and heavy-duty structural frame. At its core, istrut has an aluminum body, which creates a structural skeleton with high strength-to-weight ratios.
Ideal Industries, Inc. (Sycamore, IL) has introduced the 21-in-1 Twist-a-Nut multi-bit, dual-ratcheting screwdriver for more versatility and 50 percent more torquing power than standard ratchets. IDEAL has configured the tool so that the four bits more frequently used by electricians are pre-loaded into the driver shaft with an additional 12 specialty bits securely stored for quick access within the handle.
IMSEAL-800 is a high-strength epoxy resin that seals visible porosity in castings and other metal parts. The multi-purpose sealant from IMPCO, Inc. (East Providence, RI) is drawn beneath the surface, penetrating and filling the crack by creating a pressure-tight seal. Once cured, the resin can be drilled, tapped, or machined.
The Side Mount Series of reels from Coxreels (Tempe, AR) adds a multi-position guide arm for convenient hose control. The SG Series features a simple two-bolt mounting pattern for easy installation on vertical flat surfaces and is ideal for tight spaces — including tool benches, vehicle lifts, walls, and more — according to the company.
The new ¾ NPT Stainless Steel Super Air Nozzle from EXAIR (Cincinnati, OH) delivers 4.5 pounds blowing force for blowoff, cooling, and drying applications located in corrosive, high-temperature, and pharmaceutical environments. Its blowing strength makes it ideal for blowing heavy materials, according to the company.
The Enduro-Flex Turbo, from Walter Surface Technologies (Windsor, CT) uses its Cyclone technology and a unique mixture of abrasive grains, plus cooling agents, to produce a fast removal rate of welded material, not to mention a uniform finish. According to the company, the technology can guarantee a 36 Grit cut with a 60 Grit final finish, and can help reduce costs by as much as 30 percent through quicker labor.
Milwaukee Electric Tool Corporation (Milwaukee, WI) introduces new wood-cutting SAWZALL Blades, in both standard and The Ax profiles, to deliver durability against nail impact and a quick plunge cut, according to the company. A notable change has been the shift from a 6 TPI (teeth per inch) pattern to a more aggressive 5 TPI pattern.
Sili Kroil, from Kano Laboratories (Nashville, TN), is the result of blending Kroil and dymethyl silicones, which are able to penetrate spaces as small as one millionth of an inch, according to the company. Sili Kroil dissolves rust and lubricates to help loosen frozen metal parts. It can be used for frozen slides, bearings, gate valves, hinges, chains, and more.
A new generation joiner for precise fusing of wood or plastic profiles is now available from PAM Fastening Technology, Inc. (Charlotte, NC). The IM5 PT Joiner joins hard and soft wood molding up to 6” wide and 4-1/4” high, and allows for joining the frame while it is held in one position.
Pres-On (Addison, IL) has developed a cost-effective alternative to silicone foam with N3000, a lightweight, closed cell, cross linked form based on Nylon 6. The form is offered in 39” x 78” sheets, with thicknesses ranging from 1/16 to 1/2”. According to the company, N3000 can be fabricated into complex shapes for a variety of products, like industrial seals, gaskets, or thermal insulation.
The line of reinforced PVC high-stretch hose from Flexaust (Warsaw, IN) can be customized for upright, canister, and central vacuum cleaners. The Dayflex Lightweight Stretch Hose features PVC construction reinforced with a vinyl-coated spring steel wire helix, and comes in a flat top style with a 5:1 stretch ratio, or a full block style with a 4:1 ratio.
Allegro Industries (Garden Grove, CA) has developed a number of back supports for various applications and jobs, including the Liftbak, which is a 5” belt of rigid foam that supports the back during strenuous lifting. Allegro’s popular Deluxe Spanbak and Bodybelt are designed for greater durability and strength, while the Flexbak offers a three-part closure for a custom fit and superior lumbar support.
The Master Bond EP30FLAO (Hackensack, NJ) is a two-component epoxy resin system for high performance potting, bonding, sealing, and coating. The low-viscosity epoxy is ideal as a thermally-conductive potting compound, and has a wide service temperature range of 4K to 250°F, plus a thermal conductivity of 9-10 BTU/in/ft²/hr/ºF.
The Portable Mechanics’ Service Sets from Snap-on Industrial (Kenosha, WI) put large and small hand tools, including screw drivers, wrenches, and pliers — along with multimeters and other specialty equipment — at easy reach for professionals looking for maximum protection of their tools.
BURNDY (Manchester, NH) announced the new High Performance PATRIOT PATMD6-14V series crimping tools, which utilize the same 14.4 volt Ni-MH batteries as older models, but are 80 percent faster. The PATRIOT can complete a crimp on a 4/0 copper crimp in approximately two seconds, according to the company.
Supercritical Fluid Technologies, Inc. (Newark, DE) has developed the SFT-150 Supercritical Fluid Extraction/Reaction System, which allows users to investigate the feasibility of applying supercritical fluid techniques to various processing situations. A modular design makes it easy and cost-effective to alter the unit’s basic configurations, adapting it to meet new or evolving application needs, according to the company.
Flange Spreaders separate pipe flanges for the replacement of the flange gasket or the reapplication sealant to the flange face. The Safety Boy Flange Spreader, from WM.L.RIGGS Company (Tulsa, OK) attaches to the flange mounting holes and spreads the flange faces without the risk of damage to the flange sealing surfaces.
The Speedaire Hand Tappers, which are ideal for general purpose tapping, are now available from W.W. Grainger (Lake Forest, IL). They eliminate time-wasting hand tapping with a pneumatic high-reversal-type motor with added torque, which allows the tapper to handle a range of tap sizes. A quick-change tool holding provides tap-changing flexibility and accepts optional clutch-type tap holders.
The 110 Gallon Chip Trapper from EXAIR (Cincinnati, OH) offers a fast, easy way to clean large coolant sumps, according to the company. The Chip Trapper removes solids — such as chips, swarf, and shavings — out of used coolants and other liquids, and is ideal for use on machines with parts washers, tanks, and storage containers.
ESAB Welding & Cutting Products (Florence, SC) introduces the Origo MIG family of welders — including the MIG 320, 410, and 510 — all of which offer a wide current and voltage range that simplify optimizing settings for a wide variety of filler metals and gases. Made with a strong galvanized metal casing designed to withstand harsh environments, the Origo family features large wheels, sturdy lifting eyelets, and a standard undercarriage for easy forklift transport.
Chicago Pneumatic (Rock Hill, SC) has introduced the CP6720, a new 1/2” impact wrench that delivers speed, power, and durability for industrial maintenance. The impact wrench features 425 ft-lbs. of torque, plus a one-hand push button for forward and reverse operation. A four-position regulator allows for better control of assembling bolts and other fasteners, according to the company.