The new Precision Safety Gun from EXAIR (Cincinnati, OH) is lightweight and comfortable to operate during periods of extended use, according to the company. The small diameter nozzle and extension fit into tight spaces while packing the punch of a strong blowing force, and the sleek profile works with small or large hands.
Gage Bilt (Clinton Township, MI) is launching a solution meant for hard-to-reach fastener applications through ¼-inch diameter. The MGL08-713-58RA heavy duty right angle nose assembly will install ¼-inch Magna-Loks® and Hemlocks®. Gage Bilt also offers a unique right angle nose assembly for MS Blind Bolt, NAS Blind Rivet, UAB, Bulb-Tite, and many more.
Parker PAGE International Hose (Fort Worth, TX) has developed the Stainless Steel Braided Convoluted Hose Assemblies in SCW and SCWV designs. The tubing in these assemblies is made from virgin PTFE in natural or static dissipative style in order to provide better flex life. According to the company, the hoses show no signs of stress cracking after 1 million cycles of flex testing.
Greenlee (Rockford, IL) offers the 555 series benders and the 855GX IntelliBender. According to the company, they are designed to make consistent and accurate bends in EMT, IMC, Steel Rigid, Aluminum Rigid, Stainless Steel Rigid, and PVC Coated Steel Rigid conduit. The patent pending solid-state control system uses current-limiting technology to protect the motor and on-board electronics from a variety of job site power sources, like generators and temporary drops, as well as eliminates arcing and the potential for relay failure.
The VISE-GRIP curved jaw locking pliers from Irwin (Phoenix, AZ) feature a self-energizing lower jaw. According to the company, the jaw tightens for maximum grip as torque is applied to the tool. They are available in two core models: Fast Release, with a one-handed, triggerless release and anti-pinch, non-slip ProTouch™ Grips; and Original, with a classic trigger release.
The Instapak RC45 foam from Sealed Air (Danbury, CT) provides users with a plant-based, renewable-content packaging form that is ideal for light-duty packaging applications. The RC45 foam contains 25 percent renewable content in the finished foam, providing a reduction in the use of petroleum-based raw materials.
The Monolec Extend EM Grease from Lubrication Engineers, Inc. (Fort Worth, TX) helps bearings run cooler and last longer, along with increasing efficiency and mechanical stability. According to the company, it is ideal for severe conditions, where extreme temperatures and high speeds are present.
Pres-On (Addison, IL) has developed the PBWMF-4 white masking film, which can help prevent glass, auto trim, clear-coated aluminum and other polished surfaces from being scratched during manufacturing, shipping, or installation. PBWMF-4 is a 3.0 mil polyolefin film coated with a removable acrylic adhesive, and removes cleanly from most surfaces up to one year after deployment, depending on the application.
A line of high-temperature, high-gloss, and VOC-compliant coatings that provide a porcelain-like appearance for metal surfaces is now available from Dampney Company, Inc (Everett, MA). The Thurmalox 8800 Series Heat Resistant High Gloss Coatings are silicone-based baking enamels that can withstand head to 500°F.
Count On Tools, Inc. (Gainesville, GA) has announced that it now manufactures the RPS Automation Selective Solder Nozzles for the Rhythm, Harmony, Opus, and SS100A range of selective soldering machines. The custom solder nozzles assist to replace labor-intensive hand soldering while eliminating defects caused by wave soldering machines.
Yardley Products Corporation (Yardley, PA) has announced that it is offering inserts manufactured using a “non-magnetic” brass material, making it ideal for applications involving electronics or medical devices. Most brass inserts are slightly magnetic due to small traces of iron in the alloy, which can cause RF inferference with sensitive electronics.
The SumiMill GOALMILL Milling Cutter from Sumitomo Electric Carbide, Inc. (Mount Prospect, IL) can finish cast iron with exceptional accuracy, according to the company. The GOALMILL provides surface finishes with tangentially-mounted inserts accompanied by easily-adjustable wiper inserts.
NKE Austria (Steyr, Austria) now offers electrically-insulated roller bearings, the SQ77, provide reliable protection against current discharge and the resulting electrical corrosion. According to the company, these bearings are ideal for electric motors, generators, and electrical machines.
The WP-50 and WP-125 Micro-Tig torches from Weldcraft (Appleton, WI) features lightweight, short torch bodies that allow pen-like welding control in the most complex applications, according to the company. The WP-50 air-cooled TIG torch provides 50 amps DC of welding capacity, and its 80-degree torch head is only 5/8” long and 3/8” in diameter.
The portable and cordless HEMIPRO High Power Worklights from Cliplight Manufacturing (Toronto, ON, Canada) and Go Distribution are designed to provide 50,000 hours of halo-free LED illumination. The high-power LEDs are housed in a light-but-rugged casing designed to handle workplace rigors.
A line of Type 29 ceramic flap discs are now available from Rex-Cut Products, Inc. (Fall River, MA). The Rex-Cut Sigma Ceramic Flap Discs provide aggressive stock removal with smooth operator control on steel and stainless steel, according to the company, and feature a slight angle that provides a greater contact area.
The DayLube high-performance grease from Dayton Progress Corporation (Dayton, OH) uses nanoceramic particles, which provide continuous lubrication to steel surfaces with a lower coefficient of friction at all temperatures than traditional PTFE greases. According to the company, the grease does not soften or run out — after 100,000 production strokes, it showed no evidence of breaking down.
Camel Grinding Wheels (GCW — Niles, IL) has expanded its line of abrasive wheels with the introduction of its 3-in-1 cut/grind/finish combo wheels. The combination eliminates the need for frequent wheel changes and increases production times. When at the 90° position, the combo wheel cuts; at a 30° angle, the wheel grinds; and when used at a 15° angle, the wheel finishes.
Master Bond (Hackensack, NJ) has developed the EP21ARHT two-component epoxy for coating and lining storage tanks, piping, scrubbers, and processing equipment. Its chemical, fuel, and acid resistance allows it to withstand immersion in 20 percent hydrochloric acid for more than a year. The epoxy cures at room temperature with minimal shrinkage, or more rapidly at elevated temperatures, and once cured, it produces a bond strength greater than 2,200 psi.
For life-threatening high voltage applications where over-torque conditions are not tolerated, Mountz Inc. (San Jose, CA) offers insulated torque wrenches. Designed with non-conductive plastic insulation, the torque wrenches provide operators with safety from product failure due to shorting, arcing, or other electrical damage.
Union Process, Inc. (Akron, OH) has produced a video on 11 factors required to select the proper grinding media for a particular application. This video takes the viewer through determinations for size, consistency, initially feed size, shape, specific gravity, grinding efficiency, pH, discoloration, contamination, availability, and cost.
Metabo Corporation (West Chester, PA) has introduced a new angle grinder in the Metabo Metal Master series — the W24-180 — which is designed for cutting and grinding metal. With a 7” wheel, the tool offers 124 inch-pounds of torque and a no-load speed of 8,500 rpm. The 15 A, 4.
ZYP Coatings, Inc. (Oak Tree, TN) has announced its new “Brushable” biodegradable, oil-based lubricant/coating/paint: Keralon-B. It can be used in temperatures from ambient to 1,000°C. The lubrication is based on a combination of organic and inorganic ingredients, including Methylated Seed Oil, boron, graphite, and more.
ITW Dymon (Olathe, KS) has expanded its DYKEM CROSS CHECK Tamper Proof Torque Mark products to include five new colors: dark pink/red, yellow, blue, green, and orange. DYKEM CROSS CHECK creates a bead of color that seals nuts, bolts, fasteners, and assemblies so that changes in torque or operating settings caused by vibration loosening can be quickly determined by checking the marks for cracks, breaks, and misalignment.
Chicago Pneumatic Tool Co. (Rock Hill, SC) has been developing a 3/8” impact wrench that delivers up to 415 ft.-lbs. of torque. The CP7729’s ergonomic design features S2S technology, which allows users to change between forward and reverse with one hand in any position, making the wrench good for hard-to-reach places.