Precision Quincy (Woodstock, IL) now offers the #49C-650D, an electrically-heated oven, which is available in NFPA 86 Class ‘A’ or Class ‘B’ configurations. According to the company, the oven is a popular choice among heat processors for most curing, drying, and pre-heating needs.
For applications where flexible, high-performance bonds are required, Master Bond (Hackensack, NJ) has developed its Polymer System EP37-3FLF, which is suitable for castings with wider cross-section thicknesses. According to the company, the polymer is serviceable over the wide range of 4K to 250°F, and it cures at room temperature in two to three days, or faster at elevated temperatures.
Rotor Clip Company, Inc. (Somerset, NJ) now offers its MST-series of Truwave wave springs. The single-turn metric wave springs are available in sizes from 16mm to 170mm and are ideal for short deflection applications, according to the company. Advantages of the Truwave springs include: The ability for the springs to be installed automatically via a tapered mandrel similar to the automatic installation of retaining rings.
Design for Reliability (by Daniel T. Daley), is a new book available from Industrial Press (New York, NY) that addresses the process from the manufacturer’s viewpoint, allowing readers to deliver the goods that their customers want. According to the company, the book is ideal for anyone involved in the design, development, or purchase of new assets.
WeldSeal from IMPCO Inc. (East Providence, RI) is a brush-on methacrylate compound formulated for sealing porosity in welds that will contain gases under pressure, or liquids. The low dynamic viscosity allows it to move into pores and seams, or close-fitting ferrous metal surfaces. Additional benefits include: A mixture that is a VOC-free, low-viscosity, and pale blue liquid that can be easily applied by a brush.
The Escalator Chain Lube — available from Royal Purple (Porter, TX) — is a high film strength synthetic lubricant designed for a variety of chains, including those used in automotive and industrial applications. According to the company, it can reduce lubricant consumption by as much as 75 percent, along with reducing noise levels and extending the life of chains.
LPS Laboratories (Tucker, GA) has introduced the Clean Penetrating Grease, a high tack, clear grease that contains PTFE to enhance the lubrication performance and reduce friction. According to the National Lubrication Grease Institute (NLGI), Clear Penetrating Grease has a rating of 1 to 1.
Mountz, Inc. (San Jose, CA) has developed a new line of cordless screwdrivers to their FlexPower-branded lineup, designed for torque control and durability. The tools are built around the 10.8V and 14.4V high-capacity lithium-ion battery platforms. According to the company, they are ideal for applications where air or electric power is not easily accessible, and they automatically stop when the preset torque has been reached.
The new Oil Eater Floor Cleaner from Kafko (Skokie, IL) comes packaged in a 1.5 oz. pouch, and simplifies the task of cleaning floors and walls, according to the company. The pre-measured packets help maintain proper dilution and control wasteful overuse, while still being compatible with a mop bucket or floor scrubber.
Henkel Corporation (Rocky Hill, CT) has introduced two Loctite Structural Acrylic Adhesives formulated to fixture in just five to 20 minutes. The Loctite H8100 and H8110 Speedbonder Structural Adhesives provide excellent peel and shear strength once cured, and the bonds are designed to reduce or eliminate welds, rivets, and threaded fasteners.
The True Union Ball Valves — from Spectrom Parts (Grand Terrace, CA) — come in 1/2”, 1”, 1-1/2”, 2”, and 3” sizes, and are constructed of Georg Fisher PVC or CPVC. They have threaded or rocket connections, with the option of EPDM or Viton seals. TUBCs come in standard pipe sizes so they will work with any matching sized and material piping system.
The AbrasiMatic 300 abrasive cutter from Buehler (Lake Bluff, IL) now features the optional X-Bed for increased convenience when sectioning in the x-axis direction. The accompanying digital display tracks x-axis travel, improving precision, consistency, and repeatability in serial (parallel) sectioning applications.
LPS Laboratories (Tucker, GA) has announced its 50th anniversary with a limited edition of the United States LPS 1, LPS 2 Industrial Strength Lubricant, and LPS 3 Heavy-Duty Rust Inhibitor. The aerosol cans come with a “retro” look, which is similar to the design of the original cans in the early 1960s.
Trident Design, LLC (Las Vegas, NV) has announced three new marketing partners (NCC, Bits Limited, and Accell) for its PowerSquid, which eliminates the problem of overcrowded power strips and bulky power adaptors with a unique “tentacled” design. The PowerSquid comes in a variety of models, ranging from basic outlet multipliers to advance surge protectors.
NTE Electronics, Inc. (Bloomfield, NJ) has expanded its fuse line to include 10x38mm photovoltaic fuses for solar panel applications. The 74-10FC Solar Protection Fuse series has been specifically designed for photovoltaic (PV) systems. The midget fuses can safely protect PV modules and their conductors from reverse over current conditions despite the challenges of DC power.
The EP21ARHT two-component epoxy from Master Bond (Hackensack, NJ) was developed for coating and lining storage tanks, piping, scrubbers, and processing equipment. According to the company, it can withstand chemicals, fuel, and acids, and can survive immersion in 96 to 98 percent sulfuric acid or 20 percent hydrochloric acid for more than a year.
The new 9002W flat air nozzle from Silvent (Portage, IN) utilizes an energy-efficient design that represents a new blowing technology. Each orifice is designed to optimize the entrainment area, generating a strong, efficient blowing force at a low noise level. Aerodynamic slots of the nozzle provide high efficiency and low noise.
The flexibility of the indexing cutter head technology from Schleuniger (Manchester, NH) has been paired with servo drives and improved electronics in the new PowerStrip 9550. The tool processes a wide range of applications, from stranded wire to multi-conductor cables, as well as coaxial and other shielded cables.
The DAYlube grease — from Dayton Progress (Dayton, OH) — uses nanoceramic particles that act as microscopic ball bearings, which helps provide continuous lubrication to steel surfaces. Dayton Progress has announced that DAYlube is now available in 5-gallon pails, which makes it ideal for high-volume applications, particularly conveyors, bearings, chains, gears, and more.
The Dyna-Purge Division of Schuman Plastics, Inc. (Depew, NY) has introduced the improved Dyna-Purge M, which is a non-abrasive, non-chemical engineered thermoplastic purging compound. It is formulated to flow naturally through the barrel and hot runner system of an injection molding machine, as well as extrusion equipment.
The RIDGID (Elyria, OH) KJ-3100 water jetter offers professional power to clear blockages in 2” to 10” diameter drains with a full 3,000-psi working pressure, and a 5.5 gallon-per-minute flow. The KJ-3100 jetter allows the user to reach remote or resisted-access drains easily. The system is mounted on a heavy-duty, two-wheeled cart that fits through standard doors and negotiates tight turns, and the design allows the user to refuel without removing the reel.
Visual Workplace, Inc. (Bryon Center, MI) has introduced LabelShop, a portable labeling and bar code machine that enables users to quickly create adhesive-backed bar codes and labels. The system features a large keyboard and an LCD display for ease of use. Three 26’ long rolls of white label tape comes in widths of 0.
WeldSeal, a brush-on methacylate compound formulated for sealing porosity in welds that well contain gases under pressure or liquids, is now available from IMPCO Inc. (East Providence, RI). The WeldSeals low dynamic viscosity enables it to wick into pores and seams, allowing any excess material on the surface to be easily rinsed away with water.
Seco Tools (Troy, MI) has announced its new CBM 170 grade, the first PCBM grade developed specifically for the finish turning of nickel-based super alloys. The CBM 170 is designed for both toughness and wear-resistance, which makes it ideal for materials like Inconel 718, UDIMET, Waspaloy, MAR M, and more, according to the company.
Melmor Associates Inc. (Niles, OH) has added a new label holder line and material handling identification line. The label holder is a placard label holder, which enables the user to repetitively label returnable containers, pallet racks, and flock racks, without the mess of label and adhesive build-up.