The Multi-Cure 9-30556 coating, from DYMAX (Torrington, CT), cures in seconds upon exposure to UV/visible light and was designed for rapid coating of PCBs and other electronic assemblies. It is formulated to remain on the edges of difficult-to-wet components and sharp leads. With a medium viscosity, it was designed to enhance wetting of leads, and is compatible with most types of spray equipment.
A medium-weight thermoplastic rubber hose from Flexaust (Warsaw, IN) can now be supplied with thermally welded cuffs to provide a smooth surface and a tight seal using standard hose clamps. The TR T-7 Hose is reinforced with a spring steel wire helix, which allows the hose to resist most chemicals and is suitable for removing fumes, vapors, powders, and dust.
TurboTorch (St. Louis, MO) has introduced a new Nitrogen Flow Meter that is ideal, according to the company, for purging HVAC or refrigerator lines prior to the brazing process. The meter monitors the flow of nitrogen gas through the lines so that oxygen can be displaced. The model NFM-TT can measure gas in two ways: standard cubic feet per hour (outflow 0 to 75 SCFH), or by liters per minute (0 to 35 LPM).
Ultrachem (New Castle, DE) has developed a new line of Omnilube food-grade rotary screw and reciprocating air compressor lubricants with improved wear, oxidation, and lubricity. Omnilube food grade products meet all of the requirements of the USDA and FDA H-1 regulations, 21 CFR 178.3570, and conform to the requirements of NSF.
Spartan Scientific (Boardman, OH) is offering a miniature solenoid operator pilot assembly — Series 38KRE and 38KRI — which are designed to control inert gases and liquids. The 2-way and 3-way solenoids can be easily mounted to a flat manifold surface, and feature fully molded coil assemblies, plus either spaded or flying lead configurations.
A full line of carbide burs in a variety of styles and shapes are available from Rex-Cut Products, Inc. (Fall River, MA). According to the company, the burs are offered in standard-, double-, and non-ferrous cuts in oval ball, ball nosed tree, and tapered shapes — all of which makes them ideal for weld preparation and removal applications.
Graphite Metallizing Corporation (Yonkers, NY) is announcing a family of tin-based babbit GRAPHALLOY materials for high-temperature bearing applications. The materials are available in NSF-certified grades for drinking water, and are FDA-accepted. They are environmentally-safe through the elimination of the need for grease or oil.
Magnalight (Kemp, TX), a Larson Electronics company, has added the RL-8510W-1-UV365 handheld LED ultraviolet spotlight to their line of specialty LED lights. The light produces UV light in the 365 Nm range and has a pistol grip shape to provide comfortable handling, plus a machined aluminum body for extreme durability.
Thomas & Betts (Memphis, TN) has developed the Star Teck Extreme Director Cable Fitting, which is an adjustable, range-taking fitting, used to terminate metal-clad and Teck cable. The tool easily adjusts from 90 to 180 degrees, allowing for faster, more cost-efficient installation. A full circular bore provides for easy cable insertion, and alignment guides serve as reference points for ensuring that fittings are installed at the same angle.
Seatek Company (Stamford, CT) has introduced a new model in the Roto-Split line — the RS-101B — with an auto-clamping feature that eliminates the need to fuss with a thumb screw when cutting different sizes of AC/MC cable. Any cable from 14-2 to 10-4 or 3/8” Flex can be secured without adjustment by squeezing the bottom lever.
Pres-On (Addison, IL) is now offering an EPDM tape that combines the flexibility of standard open-cell foam tapes with the sealing qualities of closed-cell foam tapes. The Pres-On P9400 seals out damaging dust, wind, water, and noise with a variety of roll widths, lengths, and thicknesses. It is excellent for filling joints and spaces, as well as for sealing HVAC installations.
Stanley Proto (Conyers, GA) has developed nine new Interchangeable Head torque wrenches and 125 head attachments. The wrenches consist of three electronic, two micrometer, and four pre-set versions, and come in 1/4”, 3/8”, and 1/2” drives. Torque values range from 25 inch-pounds to 250 foot-pounds.
To expand their Vortec Pro bonded abrasives product line, Weiler Corporation (Cresco, PA) has added 12” and 14” cutting wheels in aluminum oxide and silicon carbide grains for general purpose cutting. According to the company, they are designed for use with steel, iron, and other ferrous metals, with a resin-bond formulation for aggressive stock removal and fast cutting.
Lista International Corporation (Holliston, MA) has developed new Technician Series toolboxes, technician carts, and cart garages. The toolboxes use a rugged design with drawers that are full extension, with a 440 pound capacity. According to the company, the addition of worktops transform the toolbox cabinet into a work area, and can come with surfaces in stainless steel, butcher block, galvanized steel, plastic laminate, or retainer top with a rubber mat.
Seekonk Manufacturing Company, Inc. and Pro Torque Tools (Atlanta, GA) are now offering Seekonk’s line of Precision Torque wrenches, screwdrivers, and testers for delivery anywhere in the world. All of Seekonk torque products are manufactured in their Massachusetts facility, with an ISO 9001-certified commitment to quality.
Duckbill LLC (Grand Rapids, MI) has designed the MobilityMax product line of ergonomic body-borne carrying gear, which allows for users to bring their hand tools, instruments, and devices with them in a modular fashion. The MobilityMax product is a system-based approach to upgrading new, or existing, fall protection harnesses that do not interfere with the ability to carry gear.
A new line of dry-running mechanical seals for mixers, agitators, and reactors that meets the ASME-BPE 2009 standards for cleanability is being introduced by Sharpe Mixers, Inc. (Seattle, WA). The Sharpe RD Dry-Running Mechanical Seals were developed for sanitary applications where product contamination from barrier fluids is unacceptable.
DeWalt (Towson, MD) has launched its two new 7”/9” Variable Speed Polishers (DWP849X and DWP849) which deliver the power and speed control necessary for use on a variety of materials, ranging from metal to concrete surfaces. Both models feature a powerful 12 amp motor and a variable speed dial that delivers 0-600/0-3,500 RPM, giving users precise control of speed and power.
Milwaukee Electric Tool Corporation (Milwaukee, WI) has expanded their M12 LITHIUM-ION system with the introduction of the M12 Rotary Tool. The tool uses optimized electronics and REDLITHIUM battery technology for a compact and portable cut-off solution. With a variable speed of 5,000 to 32,000 RPM and a collet that is compatible with all 1/32 to 1/8” shank accessories, the new tool delivers cutting, grinding, sanding, and polishing solutions.
The hydraulic bolt tensioners from Enerpac (Sydney, Australia) help facilitate faster, safer, and more precise maintenance and fabrication operations, according to the company. The GT-Series bolt tensioners, in capacities up to 320 tons at 1,500 bat, are suited where operators want to achieve known and accurate bolt loads across multiple applications.
Molex Incorporated (Lisle, IL) has announced the Multi-Drop Sealed Connector and Cable System, a modular connector system for the transfer of both power and data/signal in a multi-drop configuration. The system is fully sealed to IP66 and IP67 ratings, and can be customized to meet any requirements for internal and external data/signal and power applications.
Northfield Precision Instrument Corporation (Island Park, NY) has introduced their Automotive Rubber Grip chuck for automotive “rubber coupling” drive shaft joints. The small collet in the center grips a 14mm I.D. to an accuracy of less than 1/10,000” T.I.R. Three extended fingers simulate “bolting” the flange in place the way it is used in vehicles.
General Equipment Company (Owatonna, MN) has introduced the CTS 12 Rip-R-Stripper for floor-covering removal projects. The machine can remove ceramic tile, hardwood floors, and other tough floor coverings. The CTS12 acts as a tool carrier for electric-powered breakers with ratings between 30 and 40 foot-pounds of force.
The new TankJet 360 Fluid Drive Tank Cleaner from Spraying Systems Co. (Wheaton, IL) is equipped with a dual- or triple-nozzle hub and high-impact solid stream nozzles that rotate 360° in horizontal and vertical planes. The rotation cleans tanks up to 100’ in diameter, and can remove the stickiest of residues, according to the company.
Sensor Products Inc. (Madison, NJ) has announced the Fuji Prescale pressure film, which reveals pressures from two to 43,200 PSI. The Mylar tactile pressure-indicating sensor film instantly reveals surface pressure magnitude and distribution between contact or impacting surfaces. When placed between the surfaces, it permanently changes color directly proportional to the pressure applied.