Maintenance Tools & Supplies
Subscribe to Maintenance Tools & Supplies
View Sample

FREE Email Newsletter

Daily industrial news and top headlines for plant and maintenance managers

DAYLube High Performance Grease

September 9, 2011 9:41 am | Product Releases | Comments

New DAYLube high performance grease from Dayton Progress Corporation (Dayton, OH) uses nano-ceramic particles which act as sub-microscopic ball bearings to provide continuous lubrication to steel surfaces, and is especially suited for metalworking applications. With a low coefficient of friction at all temperatures, chemically inert DAYLube is also environmentally friendly.

SPIROL Expanded Disc Spring Line

September 9, 2011 9:40 am | Product Releases | Comments

SPIROL International Corporation (Danielson, CT) has expanded their disc spring product line to include larger sizes per DIN 2093 Group 2 (now available up to 250 millimeters in diameter) and a full range of stainless steel discs. SPIROL disc springs’ performance characteristics are predictable and the minimum life cycle can be calculated.

StacoVAR Mini

September 9, 2011 9:40 am | Product Releases | Comments

The StacoVAR Mini from Staco Energy Products (Dayton, OH) is an automatic power factor correction bank which maintains the desired power factor level by using the microprocessor based controller to adjust to system load conditions. Rugged metalized poly-propylene dry type capacitors are placed in a compact enclosure, allowing this bank to fit in a small footprint.


CYCLO COOL Synthetic Coolants

September 8, 2011 9:28 am | Product Releases | Comments

The new CYCLO COOL 900 and 5000 series synthetic coolants from MAG (New York, NY) are additive free, low foaming, and specially formulated for machining titanium, Inconel, beryllium copper, hardened steels, stainless steels, and other superalloys. Developed for the aerospace industry, the new coolants use unique synthetic formulations to provide boundary lubricant properties, while penetrating the heat barrier in the cutting zone, even at lower pressure (300 to 400 psi), to absorb heat from the tool and part, and minimize chemical reactions between tools and workpieces.

Megamat RS Vertical Carousel

September 8, 2011 9:27 am | Product Releases | Comments

The Megamat RS Vertical Carousel from Kardex Remstar, LLC (Westbrook, ME) features a new intelligent drive design, providing part and supply operations a more reliable vertical carousel requiring less maintenance and lower energy requirements. The new drive design is made up of a drive track, carrier arms, transportation chain, drive motor, drive chain, and hand crank.

Master Bond EP21FL

September 7, 2011 11:14 am | Product Releases | Comments

Master Bond EP21FL from Master Bond (Hackensack, NJ) is a two part epoxy resin system that features low to moderate viscosity. It is well suited for potting, coating, and sealing electronic assemblies and can bond dissimilar substrates with different coefficients of expansion. This adhesive has a service temperature range of -60 degrees F to 250 degrees F.

Side Exit Dual Output Accelerometer

September 7, 2011 11:12 am | Product Releases | Comments

Meggitt (Germantown, MD) has introduced a new side exit, low profile, dual output accelerometer with a built-in temperature sensor. The side exit 787T has the capability of monitoring in low clearance areas and can accommodate cable runs from any angle. Designed with a standard 3-pin MIL-C-5015 connector, the 787T is compatible with cabling infrastructure found in most industrial locations.

CNC Machining Center

September 2, 2011 7:46 am | Product Releases | Comments

Mitsui Seiki (Franklin Lakes, NJ) has introduced the HU63-T 5-xis CNC Machining Center for gas turbine power generation systems. New features include a 31.5 inch work diameter capacity on its vertically oriented table and a 660 pound fixture weight capacity. It also includes a variety of increased axis stroke options, high torque spindles, and the latest Fanuc 30iM control with enhanced features for 5-axis simultaneous machining.



September 2, 2011 5:41 am | Product Releases | Comments

The new generation of SKF SPEEDI-SLEEVE from SKF USA Inc. (Lansdale, PA) introduces an advanced and cost-effective sealing solution for worn or damaged shafts on rotating equipment. These easily installed sleeves provide a sealing surface without requiring shaft disassembly or specifying a new size of replacement seal.

Mid Rail Gantry Water Jet Cutting Machine

August 30, 2011 11:50 am | Product Releases | Comments

Jet Edge, Inc. (St. Michael, MN) has introduced the Mid Rail Gantry Model MR513 water jet cutting machine. Capable of processing material up to 5’x13’, the machine is sized especially for fabricators, machine shops, and stone and tile shops. It cuts complex parts from virtually any material without creating a heat-affected zone (HAZ).

Double Float Master Pump Switch

August 30, 2011 11:48 am | Product Releases | Comments

SJE-Rhombus (Detroit Lakes, MN) has enhanced the design of the Double Float Master pump switch for use in a wider range of applications. The new mechanical pump switch has an enhanced pumping range of 3 to 48 inches and an increased amp rating of 15 FLA at 120 VAC or 240 VAC. The Double Float Master pump switch consists of two narrow-angle mechanical floats and a splice tube, which contains a holding relay that enables the floats to function in series.

DP8891 Waterproof Digital Thermometer

August 30, 2011 11:47 am | Product Releases | Comments

The DP8891 series of waterproof digital thermometer from Omega (Stamford, CT) features a wide temperature range and can be used as a portable unit or a wall mounted large LCD meter. This battery powered unit is Celsius and Fahrenheit switchable. The meter and probe offer waterproof (IP67) rating.

Four-Channel ESD Overvoltage Suppressor

August 30, 2011 11:46 am | Product Releases | Comments

The new Cooper Bussmann (St. Louis, MO) four-channel array ESD overvoltage suppressor device provides fast response and reliable ESD protection for data signals in any application requiring input/output, antenna, audio/video ports, or data lines. The low 0.1pF capacitance protects data without distorting signals.


TAC 2 Adhesive Chain Lubricant

August 29, 2011 12:20 pm | Product Releases | Comments

CRC Industries (Warminster, PA) has introduced TAC 2 Adhesive Chain Lubricant, a lubricant which will bond to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that causes metal fatigue. It contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity.

Wind Turbine Simulator

August 29, 2011 12:19 pm | Product Releases | Comments

SpectraQuest (Richmond, VA) has introduced a full featured Wind Turbine Simulator (WTS) for education in wind turbine technology from power generation to operation. The device provides an ideal platform for teaching the fundamental principles of wind energy conversion to electricity, energy storage, control system, instrumentation, operation, and maintenance of a wind turbine.

W18LTX Cordless Angle Grinder

August 26, 2011 5:46 am | Product Releases | Comments

Metabo Corporation (Westchester, PA) has introduced its first professional-grade cordless angle grinder, complete with a rotating battery pack, making it ideal for grinding and cutting applications in hard to reach areas. The W18LTX cordless angle grinder is part of the PowerMasterSeries of 18 volt lithium-ion cordless power tools.

Microfiber Surface Cleaning Tools

August 26, 2011 5:44 am | Product Releases | Comments

Briarwood Products (Cleveland, OH) has introduced the 18 inch and 24 inch Microfiber Surface Cleaning Tools, designed for any surface cleaning application. The Microfiber Cleaning Tools are durable, easy to clean, and can fit any standard threaded handle. With an easy 360 degree swivel radius, these tools are able to slide under furniture and equipment and are also able to fit into tight corners, increasing efficiency and preventing injury.

PB 304 Multipurpose Mallet

August 25, 2011 10:43 am | Product Releases | Comments

Count On Tools Inc. (Gainesville, GA) has introduced the PB 304 Multipurpose Mallet from PB Swiss Tools. The wooden handle consists of FSC-certified hickory from the U.S. and the dimensions of the mallets are adapted to the weights of the hammer heads. Cushioning the recoil by weights in the mallet body allows full and precise strikes.

CIMTECH 46C Metalworking Fluid

August 25, 2011 10:42 am | Product Releases | Comments

CIMTECH 46C Metalworking Fluid from CIMCOOL (Cincinnati, OH) has Boeing approval under BAC 5008REVr-Areas 5 and 6. CIMTECH 46C is recommended for moderate duty grinding of hard metals such as cobalt, stellite, and titanium alloys. Designed to meet the strict performance and chemical requirements of aerospace manufacturing, the metalworking fluid has exceptional foam and odor control.

DuraTag Tag Stock And Ribbon

August 23, 2011 11:46 am | Product Releases | Comments

Graphic Products, Inc. (Portland, OR) has introduced virtually indestructible DuraTag Tag Stock and Ribbon for the DuraLabel printer. The rugged DuraTag Stock is heat-resistant up to 200 degrees Fahrenheit and is resistant to UV-light, moisture, chemical abrasion, and tearing. Available in 100 foot rolls and in five colors (yellow, red, green, orange, and blue), DuraTag Stock was created for indoor and outdoor tagging applications where both pliability and toughness are critical.

Baldor RPM AC Motor Line Now Offers 1200 HP

August 23, 2011 11:45 am | Product Releases | Comments

Baldor Electric Company (Fort Smith, AK) has expanded the RPM AC permanent magnet (PM) product offering up to 1200 HP. The RPM AC motor product line performs like a high horsepower servo motor with low rotor inertia and high power density, and is now available in the NEMA frame sizes 180, 210, 250, 280, and 440 with permanent magnet rotor construction.

7/8 Inch SDS Plus D-Handle Rotary Hammer

August 19, 2011 7:51 am | Product Releases | Comments

Milwaukee Electric Tool Corporation (Milwaukee, WI) has introduced a new 7/8 inch SDS Plus D-Handle Rotary Hammer. The 5361-21 provides 2.4 ft-lbs of impact energy and 0-1,500 RPM. Weighing in at 5.8 pounds, the hammer features a lightweight design for ease of use and reduced user fatigue.

Captain America VIKING 2450 Series Welding Helmet

August 19, 2011 7:47 am | IMPO | Product Releases | Comments

The limited edition Captain America VIKING 2450 Series welding helmet from Lincoln Electric (Cleveland, OH) features Captain America on the latest auto-darkening helmet model. Welders sporting this character-themed helmet may feel as though they can take on archenemy Red Skull, but these helmets don’t have superhero powers; instead the helmets are solar powered.

Custom Die Cut Gaskets, Seals

August 18, 2011 12:15 pm | Product Releases | Comments

Interstate Specialty Products, Inc. (Sutton, MA) has introduced custom die cut gaskets and seals that can be produced from a wide range of materials to match specific application requirements. Interstate gaskets and seals are offered in a variety of configurations, designed to prevent contaminants or light from entering into various types of equipment and instrument enclosures.

Original Series Air Operated Double-Diaphragm Pumps

August 17, 2011 12:11 pm | Product Releases | Comments

Wilden (Grand Terrace, CA) has announced that its Original Series metal Air Operated Double-Diaphragm Pumps (AODD) feature a design that is ideal for demanding liquid-transfer applications that feature a large amount of solids. This design makes them ideal for use in the pulp-and-paper industry.

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.