Cimperial 1072-HFP from CIMCOOL Fluid Technology (Cincinnati, OH) is a single fluid to prevent, control, and reduce foam—even when fluids are used in high pressure delivery systems. Developed for use in high fluid pressure applications, it is recommended for all metals and all heavy-duty machining operations.
High flex-high voltage silicone wire from Cicoil (Valencia, CA) is rated for voltages up to 42,000 Volts DC and is durable, flame retardant (UL 94V-0), free of halogens, and performs well in extreme temperatures (-65°C to +260°C). The flexible silicones wire’s clear silicone encapsulation is tear-resistant and will not deform or wear during a lifetime of more than ten million cycles.
NewAge Industries (Southampton, PA) now offers easy-to-use Newloc push-to-connect fittings in acetal copolymer and brass. Both are stocked in a variety of sizes and styles and allow quick connections to a variety of tubing. Newloc fittings offer instant, leak-proof connections with no flow restrictions, as well as a full vacuum rating (29.
RIDGID (Elyria, OH) pioneered press technology makes the high-performance tools that drive the speed and reliability of pressed copper, stainless steel, and PEX tubing connections. Benefits include the ability to work on wet systems and the removal of costly consumables like flux and solder.
The new Pulse Control Module PCM5 from Omega (Stamford, CT) converts a 4 to 20 mA signal from a process or temperature controller or computer to a time proportional output. This pulse control module mounts directly on a single 3 to 32 Vdc input SSR and supports a single phase 50 or 60 Hz operation.
Spirax Sarco (Blythewood, SC) has released a new range of lift check valves: LCV3 (cast iron), LCV4 (carbon steel), LCV6 (stainless steel), and LCV7 (SG iron). These check valves are designed for EN and ASME standards which can be used for a wide range of applications. Providing a solution for the prevention of reverse flow in pipelines carrying most types of fluids, these check valves protect equipment and prevent pressure surges associated with hydraulic forces such as water hammer.
The Standard Precision Positioning Stages from MISUMI USA (Schaumburg, IL) combine streamlined functionality with precision levels acceptable for many automation-related applications. They offer a practical solution wherever there is a need to make small positioning adjustments in the assembly, inspection, and processing instruments and jigs used in the production of consumer and industrial electronics.
Tapeswitch Corporation (Farmingdale, NY) has added magnetic and electronic non-contact interlocks and mechanical trapped key interlocks to their product lines. The non-contact interlock product line is offered as four product systems: the F-Series, SSS, and ISIS safety systems; and the Magnasafe.
Hyde Tools (Southbridge, MA) has rolled out a new line of economical adhesive spreaders, each designed with two notched sides. Each 9" x 4" spreader is comprised of carbon steel and has a rolled steel handle for easy gripping. All have notches on two sides—a 9" side for general spreading and a 4" side for reaching into corners or tight areas.
Jenny Products, Inc. (Somerset, PA) now offers the electric-powered J5A-30P air compressor. This single-stage compressor includes an ASME-certified, 30-gallon air tank and is ideal for running multiple tools simultaneously. The J5A-30P is driven by an industrial-duty, five horsepower electric motor, which requires a single-phase, 230 volt power source.
Asahi/America, Inc. (Malden, MA) has expanded their line of valves to include the Type 57IL Isolator Lug butterfly valve. The Type 57IL features a unique lug design where the 316 stainless steel lugs are inserted into the valve body during the injection molding process, permanently combining the lugs and valve body into one unit.
Stainless steel, direct acting, two-way solenoid valves from Magnatrol Valve Corporation (Hawthorne, NJ) are ideal for controlling the flow of steam, hot fluids, and cryogenic fluids. Available in 3/8 and 1/2 inch sizes, the valves require no differential pressure to open and are easily serviced while in the pipeline.
Nansulate EPX insulation from Industrial NanoTech (Naples, FL) is a corrosion prevention, chemical and flame resistant coating for equipment insulation. The two-part epoxy formula is splash resistant to acids, bases, and fuels and also reduces heat transfer to lower energy demand. Easily applied with a texture sprayer, trowel, or stiff brush while equipment in in-service, this textured coating is water-based, low odor, and low voc.
New DryLube Bearings from SKF (Lansdale, PA) eliminate the need for grease relubrication and are designed to perform virtually maintenance-free over a wide temperature range. Filled with a dry lubricant based on graphite or molybdenum disulfide and a resin binder, the dry lubricant maintains a thin film on the bearing’s rolling elements to protect against metal-to-metal contact and any potential damage caused by solid contaminants.
PristineFG food-grade lubricant for rotary compressors from Sullair (Michigan City, IN) is a long-lasting synthetic lubricant that maintains product quality and increases equipment performance. Now available for use by food processors and packagers, beverage bottlers, and pharmaceutical manufacturers, this lubricant complies with current FDA and USDA H1 regulations.
A new Bulk Bag Filling Line from Flexicon (Bethlehem, PA) automatically dispenses pallets, fills bulk bags, and accumulates filled bags for removal by forklift. The dispenser, which holds up to 15 pallets, is equipped with a powered roller conveyor that removes the bottom-most pallet from the stack, and positions it beneath the cantilevered fill head.
The new LPS monitor from CAT PUMPS (Minneapolis, MN) is designed to sense water leakage past the low pressure seals and alert maintenance personnel that the pump seals need replacing before pump drive components are at risk. Models are available for PLC or PC interfaces, and an indicator light model is are available when a PC or PLC interface is not used.
Kroil from Kano Laboratories (Nashville, TN) dissolves rust and lubricates to loosen frozen metal parts. Kroil’s unique molecular structure facilitates penetration while maintaining a structure that breaks bonds due to corrosion or compression. It is available in 8 sizes, including a new 16.
Ruhrpumpen (Tulsa, OK) has added the new centrifugal pump model CPP-L to its standard product line. The CPP-L is the low flow version of the CPP-21. The new pump complies with the ANSI B73.1 Standard and can be used to replace existing equipment without piping or base changes. The radial vane impellers for the CPP-L are designed to provide better hydraulic control and reduce the thrust load to prolong the bearing and seal’s life.
The new Type II AccuFlow Safety Can from Justrite Mfg. Co. (Mattoon, IL) was built to meet OSHA and the National Fire Protection Association requirements. Protection features include an internal stainless steel flame arrester that dissipates heat to prevent flashback ignition and a gasketed, self-closing leak proof lid that automatically vents to guard against explosion.
The TechAngle Electronic Torque Wrench from Snap-on Industrial (Kenosha, WI) is now available with a cycle-counting feature which helps track required calibration cycles of torque-measuring instruments. Designed to do the work of four torque wrenches, the wrench allows users to set the torque value in Newton meters, foot pounds, or inch pounds, and angle of rotation.
TwisterBand TB30 from igus (East Providence, RI) is a compact carrier system that makes rapid rotating movements possible up to 3,000 degrees and depends only on the belt length or design height in the axis of rotations. The smaller masses involved allow lower centrifugal forces and rotary speeds up to 720 degrees.
The Lumetronic Slider Light from National Electric (Commerce, CA) utilizes Lumetronic LEDs, the next step in rechargeable work lights with more efficient LEDs and nearly three times the brightness of ordinary LED rechargeable worklights. Its oval shape prevents rolling and fits easily in pockets.
Dialight (Farmingdale, NJ) has unveiled its new SafeSite Series LED Area Light, a compact, high-output Class I and Class II, Div 1 certified LED Area Light. Approved for use in Class I, Div 1 Groups B, C, Dl; and Class II, Div 1 Groups E, F, and G hazardous locations, the light is designed to replace up to 150-watt HID fixtures.
Hitachi America, Ltd. (Tarrytown, NY) has announced the SJ700-2200HFU2 model inverter, with a 440 A output current capability. The SJ700 can develop more than 200 percent starting torque at 0.3 Hz and 150 percent torque near 0 Hz. Another feature is the SJ700 is Hitachi’s EzSQ (Easy Sequence) built-in programming function—in many cases the need for a separate PLC can be eliminated.