Maintenance Tools & Supplies
FREE Email Newsletter
Daily industrial news and top headlines for plant and maintenance managers
Standard Precision Positioning Stages
August 12, 2011 5:54 am | Product Releases | CommentsThe Standard Precision Positioning Stages from MISUMI USA (Schaumburg, IL) combine streamlined functionality with precision levels acceptable for many automation-related applications. They offer a practical solution wherever there is a need to make small positioning adjustments in the assembly, inspection, and processing instruments and jigs used in the production of consumer and industrial electronics.
Magnetic, Electronic Key Interlocks
August 11, 2011 10:00 am | Product Releases | CommentsTapeswitch Corporation (Farmingdale, NY) has added magnetic and electronic non-contact interlocks and mechanical trapped key interlocks to their product lines. The non-contact interlock product line is offered as four product systems: the F-Series, SSS, and ISIS safety systems; and the Magnasafe.
New Line Of Adhesive Spreaders
August 9, 2011 8:05 am | Product Releases | CommentsHyde Tools (Southbridge, MA) has rolled out a new line of economical adhesive spreaders, each designed with two notched sides. Each 9" x 4" spreader is comprised of carbon steel and has a rolled steel handle for easy gripping. All have notches on two sides—a 9" side for general spreading and a 4" side for reaching into corners or tight areas.
Electric J5A-30P Air Compressor
August 9, 2011 8:04 am | Product Releases | CommentsJenny Products, Inc. (Somerset, PA) now offers the electric-powered J5A-30P air compressor. This single-stage compressor includes an ASME-certified, 30-gallon air tank and is ideal for running multiple tools simultaneously. The J5A-30P is driven by an industrial-duty, five horsepower electric motor, which requires a single-phase, 230 volt power source.
Type 57IL Isolator Lug Butterfly Valve
August 5, 2011 8:45 am | Product Releases | CommentsAsahi/America, Inc. (Malden, MA) has expanded their line of valves to include the Type 57IL Isolator Lug butterfly valve. The Type 57IL features a unique lug design where the 316 stainless steel lugs are inserted into the valve body during the injection molding process, permanently combining the lugs and valve body into one unit.
Stainless steel 2-Way Solenoid Valves
August 5, 2011 8:44 am | Product Releases | CommentsStainless steel, direct acting, two-way solenoid valves from Magnatrol Valve Corporation (Hawthorne, NJ) are ideal for controlling the flow of steam, hot fluids, and cryogenic fluids. Available in 3/8 and 1/2 inch sizes, the valves require no differential pressure to open and are easily serviced while in the pipeline.
Nansulate EPX Insulation
August 5, 2011 8:42 am | Product Releases | CommentsNansulate EPX insulation from Industrial NanoTech (Naples, FL) is a corrosion prevention, chemical and flame resistant coating for equipment insulation. The two-part epoxy formula is splash resistant to acids, bases, and fuels and also reduces heat transfer to lower energy demand. Easily applied with a texture sprayer, trowel, or stiff brush while equipment in in-service, this textured coating is water-based, low odor, and low voc.
New DryLube Bearings
August 4, 2011 10:22 am | Product Releases | CommentsNew DryLube Bearings from SKF (Lansdale, PA) eliminate the need for grease relubrication and are designed to perform virtually maintenance-free over a wide temperature range. Filled with a dry lubricant based on graphite or molybdenum disulfide and a resin binder, the dry lubricant maintains a thin film on the bearing’s rolling elements to protect against metal-to-metal contact and any potential damage caused by solid contaminants.
PristineFG Food-Grade Lubricant
August 4, 2011 10:20 am | Product Releases | CommentsPristineFG food-grade lubricant for rotary compressors from Sullair (Michigan City, IN) is a long-lasting synthetic lubricant that maintains product quality and increases equipment performance. Now available for use by food processors and packagers, beverage bottlers, and pharmaceutical manufacturers, this lubricant complies with current FDA and USDA H1 regulations.
New Bulk Bag Filling Line
August 2, 2011 11:09 am | Product Releases | CommentsA new Bulk Bag Filling Line from Flexicon (Bethlehem, PA) automatically dispenses pallets, fills bulk bags, and accumulates filled bags for removal by forklift. The dispenser, which holds up to 15 pallets, is equipped with a powered roller conveyor that removes the bottom-most pallet from the stack, and positions it beneath the cantilevered fill head.
LPS Monitor Senses Water Leaks
August 2, 2011 11:05 am | Product Releases | CommentsThe new LPS monitor from CAT PUMPS (Minneapolis, MN) is designed to sense water leakage past the low pressure seals and alert maintenance personnel that the pump seals need replacing before pump drive components are at risk. Models are available for PLC or PC interfaces, and an indicator light model is are available when a PC or PLC interface is not used.
Loosen Frozen Metal Parts
August 1, 2011 12:11 pm | Product Releases | CommentsKroil from Kano Laboratories (Nashville, TN) dissolves rust and lubricates to loosen frozen metal parts. Kroil’s unique molecular structure facilitates penetration while maintaining a structure that breaks bonds due to corrosion or compression. It is available in 8 sizes, including a new 16.
New Low Flow Centrifugal Pump
August 1, 2011 7:50 am | Product Releases | CommentsRuhrpumpen (Tulsa, OK) has added the new centrifugal pump model CPP-L to its standard product line. The CPP-L is the low flow version of the CPP-21. The new pump complies with the ANSI B73.1 Standard and can be used to replace existing equipment without piping or base changes. The radial vane impellers for the CPP-L are designed to provide better hydraulic control and reduce the thrust load to prolong the bearing and seal’s life.
Type II AccuFlow Safety Can
July 28, 2011 8:16 am | Product Releases | CommentsThe new Type II AccuFlow Safety Can from Justrite Mfg. Co. (Mattoon, IL) was built to meet OSHA and the National Fire Protection Association requirements. Protection features include an internal stainless steel flame arrester that dissipates heat to prevent flashback ignition and a gasketed, self-closing leak proof lid that automatically vents to guard against explosion.
TechAngle Electronic Torque Wrench
July 27, 2011 11:19 am | Product Releases | CommentsThe TechAngle Electronic Torque Wrench from Snap-on Industrial (Kenosha, WI) is now available with a cycle-counting feature which helps track required calibration cycles of torque-measuring instruments. Designed to do the work of four torque wrenches, the wrench allows users to set the torque value in Newton meters, foot pounds, or inch pounds, and angle of rotation.
TwisterBand TB30
July 26, 2011 9:52 am | Product Releases | CommentsTwisterBand TB30 from igus (East Providence, RI) is a compact carrier system that makes rapid rotating movements possible up to 3,000 degrees and depends only on the belt length or design height in the axis of rotations. The smaller masses involved allow lower centrifugal forces and rotary speeds up to 720 degrees.
Lumetronic Slider Light
July 26, 2011 9:49 am | Product Releases | CommentsThe Lumetronic Slider Light from National Electric (Commerce, CA) utilizes Lumetronic LEDs, the next step in rechargeable work lights with more efficient LEDs and nearly three times the brightness of ordinary LED rechargeable worklights. Its oval shape prevents rolling and fits easily in pockets.
SafeSite Series LED Area Light
July 26, 2011 9:47 am | Product Releases | CommentsDialight (Farmingdale, NJ) has unveiled its new SafeSite Series LED Area Light, a compact, high-output Class I and Class II, Div 1 certified LED Area Light. Approved for use in Class I, Div 1 Groups B, C, Dl; and Class II, Div 1 Groups E, F, and G hazardous locations, the light is designed to replace up to 150-watt HID fixtures.
SJ700-2200HFU2 Model Inverter
July 25, 2011 10:11 am | Product Releases | CommentsHitachi America, Ltd. (Tarrytown, NY) has announced the SJ700-2200HFU2 model inverter, with a 440 A output current capability. The SJ700 can develop more than 200 percent starting torque at 0.3 Hz and 150 percent torque near 0 Hz. Another feature is the SJ700 is Hitachi’s EzSQ (Easy Sequence) built-in programming function—in many cases the need for a separate PLC can be eliminated.
New AeroVent 1 From Newstripe
July 21, 2011 4:57 am | Product Releases | CommentsThe new AeroVent 1 from Newstripe, Inc. (Aurora, CO) can deflate aerosol cans to recyclable scrap metal. It can quickly puncture and drain a variety of aerosol can sizes, reducing the cost of hazardous waste disposal. A smaller version of the AeroVent 3, it is designed for users that have smaller quantities of cans in a variety of sizes.
STAR TECK EXTREME DIRECTOR Cable Fitting
July 21, 2011 4:49 am | Product Releases | CommentsThe STAR TECK EXTREME DIRECTOR Cable Fitting from Thomas & Betts (Memphis, TN) is an adjustable, range-taking fitting, used to terminate metal-clad and Teck cable. Featuring a swashplate design, the fitting adjusts from 90 to 180 degrees and is available in half- and three-quarter inch NPT hub sizes.
NORDOT Adhesive #34P-4
July 18, 2011 10:50 am | Product Releases | CommentsNORDOT Adhesive #34P-4 from Synthetic Surfaces Inc. (Scotch Plains, NJ) is a new one component outdoor adhesive that was designed to install and repair synthetic turf and other outdoor surfaces in widely variable and hostile weather conditions. Allowing for year-round installation and repair, the adhesive can be applied to a dry or damp surface at any temperature and humidity in which a mechanic can work.
Hydrovane V Series Rotary Vane Compressor
July 14, 2011 12:08 pm | Product Releases | CommentsHydrovane (Redditch, Worcestershire, UK) has announced its new Hydrovane V Series line of rotary vane compressors. Small, quiet, and affordable, Hydrovane compressors are all direct drive with no belts or gears to maintain. They operate at 1760 RPM’s for low stress, noise, and long compressor life.
A1000 Variable Speed Drive
July 14, 2011 7:39 am | Product Releases | CommentsThe new A1000 Variable Speed Drive from Yaskawa America Inc. (Waukegan, IL) is compatible with interior and surface permanent magnet motors and provides up to 200 percent torque. The user-friendly configuration includes a multi-language LCD display, parameter storage, and application presets.
New Viega ProPress System
July 13, 2011 7:49 am | Product Releases | CommentsThe Viega ProPress system from Viega (Wichita, KS) is now available for joining stainless steel piping in sizes from ½-inch to 4-inches using press technology to secure pipe connections in under seven seconds. The system of stainless steel pipe, valves, and fittings provides a flameless way for water-tight and gas-tight stainless steel joining.
