AkzoNobel has released this rather fascinating video about how it has worked with Newcastle University to improve the sustainability and fuel economy of the world’s largest ships.
One lawsuit alleges the plant operators "illegally, recklessly or negligently" dumped hazardous substances outside the boundaries of the property. The lawsuit also said contamination spread through at least a 5-mile radius around the facility, exposing people to increased risk of cancers, kidney failure and damage to the central nervous system.
Since motors and drive systems are so often directly intertwined with production, problem areas likely result in costly downtime — something every manufacturer wants to avoid at all costs.
For applications that do not require variable speed, this new option lets users fix a specific linear travel speed in one or both directions of travel.
VariTap's design engineering includes a proprietary spiral point geometry that lowers tapping torque, extending tool life while efficiently driving chips forward in through holes, says the company.
VIBRA-STOP overcomes traditional roadblocks that prevent thread-lockers from being packaged in spray applicators.
Three Japanese brands — Lexus, Toyota and Acura — took the top spots in this year's survey, and seven of the top 10 brands are Japanese. But three non-Japanese brands — Audi, Volvo and GMC — cracked the top ten.
Each light has a 210 degree articulating head that rotates a full 360 degrees, and a removable magnet with 135- pound pull strength that attaches to most contoured steel surfaces.
The textured fingertips provide a grip that allows for complete control in both wet and dry environments, and the extended cuff provides extra protection to the wrist and lower forearm.
Older brake fluid and corrosion of the brake piston inside the front brake master cylinder can form a gas that reduces fluid pressure transmission to the front brake.
The recall covers some Nissan Pathfinders from the 2013 and 2014 model years, as well as the 2013 Infiniti JX35 and its successor model, the 2014 QX60.
The failure happened Nov. 19, 2011, as the 884-megawatt coal-fired plant near Becker was being returned to service following a maintenance outage. The malfunction caused extensive damage to the unit's steam turbine and generator.
The Industrial Internet is creating a new generation of intelligent devices that are self-aware, able to adapt their behavior, and can be managed and reprogrammed to meet rapidly changing requirements.
A fire killed 10 people at a garment factory in Bangladesh about six months after a factory building collapse that killed 1,100 people exposed the harsh and often unsafe conditions in an industry that is the world's third-largest.
Let’s face it. Sometimes the biggest roadblocks to process improvement are people and their attitudes. Likewise, as much as we politely don’t discuss it, sometimes the biggest sources of waste, especially in office environments, are not processes, but people and their expectations and demands and decisions.
Tokyo Electric Power Co. said that a pump to inject water into one of the severely damaged reactors at the Fukushima Daiichi nuclear power plant halted Monday, possibly due to a problem at a power switchboard.
The rise in energy prices is an unwelcome reality in today’s manufacturing and business environment. While the rate of price increases for natural gas, heating oil, and other sources may vary from year to year, the upward trajectory is clear. Energy cost reduction strategies are vital to staying competitive.
Manufacturers of aluminum extrusions are highly dependent on the availability of high-quality billet, which can sometimes be difficult to procure either in cut lengths or logs. Without billet, extrusions do not get run and on-time deliveries do not occur, particularly with custom products. This situation can put customers at risk.
Energy costs are a significant portion of any compressed air system's total lifetime cost. In fact, the amount of energy required to run an air compressor for just one year can exceed the compressor purchase price. Over a period of 10 years, energy normally totals 70 percent of the overall costs.
Successful metal fabrication companies are always on a mission to improve their lead times to cut down on operating costs and to increase customer satisfaction. Many managers may try to analyze what the company does or doesn’t need, or which of the available suppliers might be cheaper and/or faster, yet provide them with their company’s specific needs without sacrificing quality in their products.
Federal officials have cited an upstate New York manufacturer for 16 safety violations after a fatal forklift accident. National Pipe and Plastics, Inc. of Vestal has been cited by the Occupational Safety and Health Administration for serious violations of workplace health and safety standards.
A National Transportation Safety Board report blames shoddy workmanship for an in-flight tear in the roof of a Southwest Airlines plane in 2011. The Boeing 737-300 was en route from Phoenix to Sacramento, Calif., on April 1, 2011, when a 5-foot-long gash opened in the fuselage.
The Department of Defense has awarded a $3.4 billion contract to Lockheed Martin Aeronautics in North Texas to build fighter planes for the U.S. military and also foreign services. Under the terms of the contract, the Lockheed plant in Fort Worth will expand its manufacturing of various models of the F-35 fighter plane.
Though the foregoing examples focus primarily on how a strong safety culture can impress and reassure customers, the chief impetus behind building a strong safety culture is to protect a company’s most valuable asset: its employees.
Wind turbine manufacturer Vestas Wind Systems has announced its biggest order in three years. The company has a contract for a Texas wind energy project that will mean more work for Vestas' Colorado plants, including its wind tower plant south of Pueblo. Vestas said Duke Energy Renewables has placed an order for two projects in southern Texas.