The Wireless Environmental Temperature, Humidity, and Dew point Sensor/Transmitter alerts the user via text or email when pre-set targets are reached.
The MLX contains a 6 digit numerical display with a range of +/- 999999 and a 20 segment bar graph indicating 0 to 100 percent of full scale.
Fluke Corporation has introduced five new infrared cameras with a broad range of powerful capabilities
Now, high-accuracy measurement can be had in a convenient, hand-held tool.
RIDGID® (Elyria, OH) has announced the RIDGID micro CA-300, a purpose-built, hand-held inspection camera. The camera offers an easy way to diagnose and document jobsite problems. The unit records still images and videos, and integrates audio with a built-in microphone and speaker, providing the ability to record insights and playback problems in hard-to-reach areas.
The new Data Logging Hot Wire Anemometer/IR Thermometer (CIH20DL) from General Tools & Instruments (New York, NY) may have no equal when it comes to measuring the speed, volume, and temperature of slow-moving air. Technicians and contractors will welcome its ability to perform minimally invasive duct flow testing and energy audits, convert air speed readings to airflow volume measurements in units of CFM or CMM, and determine air and surface temperatures—including identifying overheated system components—all with a data logging capacity of 20,000 data points.
Psion Teklogix (London, United Kingdom) has announced the Omnii™ XT15, its next generation rugged handheld device. With its extended battery run time, the Omnii XT15 represents a new landmark for rugged mobile devices. To extend the value of Omnii even further, the new, industry-first, Omnii Advantage program gives customers the opportunity to re-purpose their devices free of charge at any time after the first year of ownership.
The NEWPORT® iTHX-SD transmitter from NEWPORT Electronics, Inc. (Santa Ana, CA) lets users view virtual charts and record temperature, relative humidity, and dew point with no special software—just a Web browser. The device can trigger an alarm if the temperature or humidity goes above or below a set point that the user determines.
The Yokogawa Corporation of America (Newnan, GA) has announces that it’s Single Loop Controller, the YS1700, is now qualified for non-safety seismic and safety seismic applications. For years the YS series of controllers have provided reliable and accurate control for many industries.
The Fluke® 430 Series II Three-Phase Power Quality and Energy Analyzers from Davis Instruments (Vernon Hills, IL) help locate, predict, prevent, and troubleshoot issues in three-phase and single-power distribution systems. On each analyzer, an energy loss calculator displays losses in dollars while automatic trending ensures that every measurement is automatically recorded.
Powercast ’s (Pittsburgh, PA) two new ultra-long life, battery-powered sensors join the company’s existing battery-less, RF-powered sensors that are available for its Lifetime Power Wireless Sensor System. The WSN-1101, measures temperature, humidity, light, and external temperature.
The new ROTALIGN ULTRA MultiCoupling feature from LUDECA (Doral, FL) allows the alignment of up to seven machines in a train to be measured simultaneously, with a single quarter rotation, or less, of the shafts. This can save enormous amounts of time and resources when aligning turbine trains on the critical path in an outage, or machine trains with gearboxes that are difficult to turn.
Milwaukee Tool Corporation (Milwaukee, WI) continues to expand their test and measurement line with a new product for troubleshooting fluorescent lighting. With the ability to test fluorescent gas, check pin connections, and test ballasts, the Milwaukee® Fluorescent Lighting Tester can allow technicians to troubleshoot an entire building in half the time.
Omega ’s (Stamford, CT) new HHM8229 5-in-1 autorange digital multimeter offers temperature, RH, sound, light, and digital multimeter all in one device. It features a large backlight LCD display for easy reading, auto power off, and an audible and visual illuminated warning for correct input jack connections.
The 5i advanced digital force/torque indicator from Cooper Instruments & Systems (Warrenton, VA) is designed to work with a range of remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for interchangeability.
The new AEGIS™ Shaft Voltage Test Kit from Electro Static Technology (Mechanic Falls, ME) makes it easier to measure and document damaging VFD-induced voltages while there is still time to head off bearing damage and equipment downtime. The kit includes a special replaceable probe tip for highly accurate voltage readings on rotating equipment.
Columbia Research Laboratories (Woodlyn, PA) has introduced the Model VM-300 vibration meter, a general purpose vibration measuring instrument designed for routine checks of industrial equipment where portability and ease of use are required. Acceleration, velocity, and displacement measurement modes are provided, along with a number of value enhancing features.
Yokogawa Corporation of America (Newnan, GA) has released the ProPlus Digital Panel Meter series, which was designed according to Yokogawa’s rigorous engineering and high quality standards. The ProPlus Digital Panel Meter series is available in eight different models with up to 24 feature enhancing options.
Control Company ’s (Friendswood, TX) new Traceable® Digital Hygrometer/Thermometer/Dew Point instrument provides a response time of less than 10 seconds with a resolution of 0.01 percent relative humidity, 0.01 degrees F, and 0.01 degrees F dew point. It samples one-and-a-half times per second.
Binder-USA (Camarillo, CA) has announced new receptacles with adjustable angular positions as part of the Series 713, 763, 715, and 766 automation product ranges. The panel-mounted receptacles can be rotated during installation to allow a right-angle cordset to connect in a desired angular position.
The Yokogawa Corporation of America (Newnan, GA) is proud to announce the newest addition to the UTAdvanced family, the UT35A-L Limit Controller. The 1/4 DIN sized limit controller is an FM approved instrument ideal for oven, furnace, and kiln applications. The UT35A-L can be configured as a high or low limit and comes standard with universal input, three alarm outputs, and retransmission output.
The SeriesTT03C digital cap torque gauges from Cooper Instruments & Systems (Warrenton, VA) are economical solutions for basic handheld cap torque testing. These portable instruments eliminate the need to secure closures in a fixture. A dedicated remote torque sensor with Jacobs chuck is supplied with a universal grip for caps from 0.
Yokogawa Electric Corporation (Newnan, GA) has announced the DTSX200 Distributed Temperature Sensor (DTS). The DTSX200 is used to monitor temperature and flow in oil/gas upstream unconventional and conventional in-well applications, pipeline leak detection, fire detection, and other thermal monitoring applications.
The new AQ200 from E Instruments International (Langhorne, PA) is a multifunctional, hand-held, highly sensitive, and extremely accurate indoor air quality monitor perfect for numerous IAQ applications. The AQ200 includes: CO2 Sensor (0 – 5000 parts per million) CO Sensor (0 – 1000 parts per million) Ambient Temperature (-4 to 176 degrees F) Atmospheric Air Pressure Humidity CO/CO2 Resolution = 1 parts per million IP54 Dust Protection 2 Line Display Min/Max/Hold/Unit Selection ABS Shock-Proof Housing 8,000 Data Memory Points For additional information, go to www.
Industrial Safety Technologies (The Woodlands, TX), owner of Detcon and GMI, recently introduced the PS200 portable multi-gas detector. The PS200 monitors and displays up to four hazardous gas conditions simultaneously. Both lightweight and durable, it uses catalytic bead sensor technology to monitor and detect a wide range of combustible gases, and electrochemical sensor technology to monitor and detect carbon monoxide, hydrogen sulfide, and oxygen deficiency.