DEUBLIN Company (Waukegan, IL) introduces the Slip Rings, an electrical device that allows the transmission of power from a stationary to a rotating structure. The rings from DEUBLIN can be easily configured for both power and signal connections, and are compatible with Ethernet, Profinet, RS-232, RS-485, RS-422, CAN, as well as generic analog signals.
Fastenal (Winona, MN) offers a solution to industrial vending with the SmartStore, which is managed by the customer’s local Fastenal store team and stocked with the products they use most. Installation requires only electricity and Internet access, according to the company. Advantages of industrial vending include: Reduction in consumption by tracking employee usage and setting limits.
Universal Package Systems (Dale, IN) has expanded its bulk container and tote cut and weld capabilities, and is now producing a variety of custom containers based on customer demands. By customizing the size of the container for a specific application, customers will be able to maximize their storage area while effectively reducing shipping costs.
VICI Valco (Houston, TX) has a new Universal Valve Actuator that allows instrument manufacturers to use a single motor and control software to operate any Valco or Cheminert rotary valve. All valves and selectors, with a wide range of turning torques, are covered by three actuator versions: high-speed, medium-speed/medium-torque, and high-torque.
The FXC-HD large-area gripping system from Schmalz (Raleigh, NC) facilitates energy-saving and cost-efficient automation with a small main body and a small evacuation volume. The chambers from the suction and blow-off functions are separate, so items can be set down quickly, using less power, with only 0.
The TruMark 5020, a new fiber laser marker from TRUMPF (Farmington, CT), is ideal for applications on metals and plastics with high speed and excellent edge quality requirements. The 5020’s dynamic scanner module is able to convert pulse frequencies of up to 1 MHz into a correspondingly high processing speed.
Motoman’s (Dayton, OH) new 6-axis MA1400 “Master Arc” welding robot significantly increases uptime by integrating the torch into the upper arm, and is available in floor-, wall-, or ceiling-mounted configurations. The MA1400 is ideal for high-density layouts with multiple robots working in close proximity due to its integrated cabling, which reduces interference and cable wear.
Koike Aronson/Ransome, Inc. (Arcade, NY) introduces the KOIKEJET waterjet cutting system, which features a precision ground ball screw drive for a smooth and accurate cutting motion, as well as laser alignment, initial height sensing, and adjustable water level control for improved cutting efficiency.
Nordson ASYMTEK (Carlsbad, CA) introduces the CPJ+ (Calibrated Process Jetting Plus), which reduces process variability to maintain a constant Takt time by ensuring consistent flow rates. Using the proprietary Fluidmove software for Windows XP, the CPJ+ automatically compensates for fluid viscosity changes over time and batch-to-batch variations.
The pop-up transfer conveyors from TKF (Cincinnati, OH) are light-duty units designed to handle loads up to 250 pounds with motorized roller-driven strands, eliminating noisy chain drives. The conveyors also do not use vertical guides or cam ramps for positioning, which simplifies maintenance.
Sullair Corporation (Michigan City, IN) announces the redesign of their 200 HP compressors offered with a choice of constant speed drive models (the LS-200S) or constant speed drive with variable capacity control (the VCC-200S and VCC-250S). The VCC models use Sullair’s spiral valve technology, which allows the compressor to match pressure and capacity with system demand, lowering energy usage.
MAG (Sterling Heights, MI) has redesigned its modular HMC 1250 Series machining tool with a new 180,000 position A-axis tilt spindle for 5-axis horizontal machining on large parts. The new 6,000 rpm/ 46 kW tilt spindle is engineered for machining large equipment parts for aerospace, pump, or valve applications.
Eriez (Erie, PA) is introducing the PolyMag Process, which provides multi-material plastic processors with material savings by creating a material that incorporates separation characteristics into the design. By introducing less than one percent of the PolyMag Additive, the leftover scrap resin from co-injection, two-shot injection, or overmolding processes can be separated with high-intensity magnets.
Mettler Toledo (Columbus, OH) introduces the BBA449 counting scale that allows molding machine operators to more effectively supervise their machines. The colorWeight display alerts operators if boxes are full with a visible display—useful for operators responsible for multiple machines.
Thomson (Wood Dale, IL) introduces the RW64-V RoundWay Linear Roller Bearing, a 4” version with a dynamic load capacity of 70,000 lbf (310,800 N), more than 20 times the load capacity of a conventional linear ball bearing. The RoundWay can carry that load even at operating temperatures up to 500°F and speeds up to 100 ft/s (68mph).
Omron Electronics LLC (Schaumburg, IL) has introduced its compact Trajexia motion controller module that integrates into CJ-Series PLCs to handle complex motion tasks for up to 30 serves or inverters. The module is fully compatible with a variety of processors (CJ1M, CJ1G, and CJ1H), and advanced programmable automation controllers.
The MacSTANDARD line of linear actuators and belt drives from Macron Dynamics (Croydon, PA) are designed to provide “off-the-shelf” components suitable for industrial linear motion, robotics, and automation applications. The actuators are available in travel lengths from 184 to 2,242mm with maximum speeds of 1,270 mm/sec to 15,240 mm/sec.
The EasyMark 5-in-1 Tooling Kit from Mate Precision Tooling (Anoka, MN) is a thick turret application tooling system for machines with a bottom stroke forming feature. The system can be set up to automatically perform any of the following five marking applications: Write numbers, dates, and other important information — no penetration or metal removal is involved.
The Instapak TempGuard Cold Chain Packaging system from Sealed Air (Danbury, CT) has been designed to keep temperature-sensitive products safe during shipment. The Instapak polyurethane foam performs better than expanded polystyrene, according to the company, allowing customers to choose more cost-effective solutions than overnight priority shipping.
Label-Aire (Fullerton, CA) has launched the Inline Series 5100 Vacuum Wrap Front/Back label system, which was designed to accurately apply both front and back labels to round bottles without the need for a second applicator. The 5100 labeler features a vacuumized wrap transport belt using a single Label-Aire 3015-ND Wipe-ON label applicator.
The new SVI Vertical Bagger from Bosch Packaging Technology (Waiblingen, Germany) is ideal for a wide range of food and non-food application due to its versatile operation. The SVI machines can produce bags with a corner seal and doy style bags with optional zippers, with simple additions and changes.
Lowell Corporation (Worcester, MA) has expended its capacity for designing custom motion control components, and can now provide customized solutions for a variety of applications: paper and metal processing machinery, conveyors, chain binders, and more. If a customer requires a non-standard motion control device, Lowell can typically fill the need by modifying an existing product in its line, by altering the shape or size of the drive, adding or removing teeth on a gear, or changing the configuration of a handle.
Dispense Works (McHenry, IL) has designed its Axis series automated filling systems, useful to fill grease or pastes into cavities and onto components with accurate and repeatable volumes. The system is self-contained, requiring no PC for operation, and is controlled through a menu-drive LCD interface, which requires no programming experience.
Alcoa Fastening Systems (Tracy, CA) introduces the Marson-brand SST, a low cost, Spin/Spin pneumatic rivet nut production tool. The SST offers simple replacement and changeover with a quick-change nosepiece assembly and standard socket hand cap screw mandrel, and the tool operates without stroke adjustment.
AutomationDirect (Cumming, GA) has extended its NITRA pneumatic product line to include a series of stainless steel, round body, non-repairable cylinders. The new cylinders are made of 304 stainless steel bodies with high-strength aluminum alloy porting ends. Bore sizes range from 7/16” to 18 inches.
- Page 11