Penn Stainless Products (Quakertown, PA) has expanded its inventory to include large-diameter sizes of round bar through 22” diameter (in 304/L) and through 24” diameter (in 316/L). The materials conform to ASTM A479 and ASTM A182, and the addition allows the company to be the only stainless center that stocks 304/L and 316/L in their largest sizes.
Stanley VIRAX (Conyers, GA) has redesigned its industrial pressing tool — the P22+ — to make it easier to use and maintain. In addition, it uses industry-standard press fittings to make solder-less joints in copper, stainless steel, and PEX tubing. The new version has lost two pounds in weight compared to its predecessor, while a redesigned housing offers an ergonomic pistol grip, a sleek profile, and enhanced resistance to drops and shocks.
The Cynch-Lok fall restriction pole strap from Capital Safety’s (Red Wing, MN) DBI-SALA line uses a unique design that will “cynch” around a pole to limit fall distances when used correctly. The system also offers slide-in-place adjustment to fit the pole and allows climbers to adjust to the pole diameter while climbing, while the strap maximizes versatility by eliminating the need for multiple devices.
The cordless SIW 18T-A CPC lithium ion high torque impact wrench from Hilti (Tulsa, OK) packs battery performance into a rugged design for complete mobility, according to the company. The SIW 18T-A achieves an impressive number of fastenings per battery charge, all while allowing the motor to provide maximum torque when needed.
Northfield Precision Instrument Corporation (Island Park, NY) introduces their 5C Collet Chuck, which is interchangeable with their standard 4” chucks because of an identical bolt pattern. The chuck is air-actuated and uses Northfield’s standard air feed tubes (wet or dry). All components are hardened and ground to 58/63 R.
A new series of 70 wire rope isolators from Advanced Antivibration Components (AAC — New Hyde Park, NY) feature multiaxial shock and vibration protection, corrosion-resistance, and maintenance-free operation. The cable itself is made from stainless steel in a variety of sizes (1/16", 3/32", 1/8", 5/32", 3/16", 1/4”, 3/8", 1/2", 5/8", and 7/8" diameter), and the mounting plates are made of aluminum.
Melmor Associates Inc. (Niles, OH) has added a new product line, which includes platform trucks, direct drive portable blowers, chrome wire shelving and carts, casters, bulk containers, and more. The new products include the Prohanger, which is a plastic cradle that holds, hangs, and organizes extra-long parts in service trucks used by technicians.
A full range of welding end prep tools that combine a formed tool bit with an adjustable bit locking system are available from ESCO Tool (Holliston, MA) with the ESCO MILLHOG Welding End Prep Tools. The line includes several models for machining compound end preps on tube and pipe from 2” I.
Reed Manufacturing Company’s (Erie, PA) ½ horsepower, electric 5401TMSO Threading Machine centers and chucks pipe or conduit for cutting, threading, and reaming applications. The oil system uses a self-priming pump that floods the pipe with oil while threading, and the open workspace features a large, integral oil reservoir.
RIDGID (Elyria, OH) has introduced the new all-in-one CS1000 digital recording monitor, which is compatible with all RIDGID SeeSnake reels. It also consists of an upgraded LCD Pak , as well as a durable keyboard. The LCD Pak is designed for performance and durability, with a lightweight design and battery-powered mobility, and has a 12.
FCT Assembly (Milpitas, CA) has introduced its RMA250 Solder Paste, which is a rosin-based chemistry designed to provide repeatability and consistency in the printing process. The paste offers an extended abandon time and excellent soldering activity with all surface finishes, according to the company.
Seatek Company (Stamford, CT) has introduced a new model in its Roto-Split line — the RS-101B — which is equipped with an auto-clamping feature that eliminates the need for a thumb screw when cutting different sizes of AC/MC cable. Any cable from 14-2 to 10-4 or 3/8” Flex is secured just by squeezing the bottom lever, preventing the application of too much force to aluminum casing.
The Pro Polish floor polishing system from General Equipment Company (Owatonna, MN) was designed for use with popular models of single- and dual-head, low-speed surface grinders, and works well with concrete, marble, and any other surface that can be polished. The system uses a series of seven 10-inch diameter diamond-polishing pads, which have a chemistry that is specially formulated to operate at the lower rotational speeds found in surface grinding equipment.
STI Electronics, Inc. (Madison, AL) announces that its Through-Hole Solder Training Kits are an economic way to ensure each employee receives consistent skills training for through-hole component types and wire terminal attachments, which are encountered in production. The kits are updated versions of the industry-standard certification kits created for the Military Certification Programs.
Kundel Industries (Austintown, OH) has developed the istrut, which is a modular strut aluminum building system that addresses the gap between standard strut and heavy-duty structural frame. At its core, istrut has an aluminum body, which creates a structural skeleton with high strength-to-weight ratios.
Ideal Industries, Inc. (Sycamore, IL) has introduced the 21-in-1 Twist-a-Nut multi-bit, dual-ratcheting screwdriver for more versatility and 50 percent more torquing power than standard ratchets. IDEAL has configured the tool so that the four bits more frequently used by electricians are pre-loaded into the driver shaft with an additional 12 specialty bits securely stored for quick access within the handle.
IMSEAL-800 is a high-strength epoxy resin that seals visible porosity in castings and other metal parts. The multi-purpose sealant from IMPCO, Inc. (East Providence, RI) is drawn beneath the surface, penetrating and filling the crack by creating a pressure-tight seal. Once cured, the resin can be drilled, tapped, or machined.
The Side Mount Series of reels from Coxreels (Tempe, AR) adds a multi-position guide arm for convenient hose control. The SG Series features a simple two-bolt mounting pattern for easy installation on vertical flat surfaces and is ideal for tight spaces — including tool benches, vehicle lifts, walls, and more — according to the company.
The new ¾ NPT Stainless Steel Super Air Nozzle from EXAIR (Cincinnati, OH) delivers 4.5 pounds blowing force for blowoff, cooling, and drying applications located in corrosive, high-temperature, and pharmaceutical environments. Its blowing strength makes it ideal for blowing heavy materials, according to the company.
The Enduro-Flex Turbo, from Walter Surface Technologies (Windsor, CT) uses its Cyclone technology and a unique mixture of abrasive grains, plus cooling agents, to produce a fast removal rate of welded material, not to mention a uniform finish. According to the company, the technology can guarantee a 36 Grit cut with a 60 Grit final finish, and can help reduce costs by as much as 30 percent through quicker labor.
Milwaukee Electric Tool Corporation (Milwaukee, WI) introduces new wood-cutting SAWZALL Blades, in both standard and The Ax profiles, to deliver durability against nail impact and a quick plunge cut, according to the company. A notable change has been the shift from a 6 TPI (teeth per inch) pattern to a more aggressive 5 TPI pattern.
Sili Kroil, from Kano Laboratories (Nashville, TN), is the result of blending Kroil and dymethyl silicones, which are able to penetrate spaces as small as one millionth of an inch, according to the company. Sili Kroil dissolves rust and lubricates to help loosen frozen metal parts. It can be used for frozen slides, bearings, gate valves, hinges, chains, and more.
A new generation joiner for precise fusing of wood or plastic profiles is now available from PAM Fastening Technology, Inc. (Charlotte, NC). The IM5 PT Joiner joins hard and soft wood molding up to 6” wide and 4-1/4” high, and allows for joining the frame while it is held in one position.
Pres-On (Addison, IL) has developed a cost-effective alternative to silicone foam with N3000, a lightweight, closed cell, cross linked form based on Nylon 6. The form is offered in 39” x 78” sheets, with thicknesses ranging from 1/16 to 1/2”. According to the company, N3000 can be fabricated into complex shapes for a variety of products, like industrial seals, gaskets, or thermal insulation.
The line of reinforced PVC high-stretch hose from Flexaust (Warsaw, IN) can be customized for upright, canister, and central vacuum cleaners. The Dayflex Lightweight Stretch Hose features PVC construction reinforced with a vinyl-coated spring steel wire helix, and comes in a flat top style with a 5:1 stretch ratio, or a full block style with a 4:1 ratio.