The hydraulic bolt tensioners from Enerpac (Sydney, Australia) help facilitate faster, safer, and more precise maintenance and fabrication operations, according to the company. The GT-Series bolt tensioners, in capacities up to 320 tons at 1,500 bat, are suited where operators want to achieve known and accurate bolt loads across multiple applications.
Molex Incorporated (Lisle, IL) has announced the Multi-Drop Sealed Connector and Cable System, a modular connector system for the transfer of both power and data/signal in a multi-drop configuration. The system is fully sealed to IP66 and IP67 ratings, and can be customized to meet any requirements for internal and external data/signal and power applications.
Northfield Precision Instrument Corporation (Island Park, NY) has introduced their Automotive Rubber Grip chuck for automotive “rubber coupling” drive shaft joints. The small collet in the center grips a 14mm I.D. to an accuracy of less than 1/10,000” T.I.R. Three extended fingers simulate “bolting” the flange in place the way it is used in vehicles.
General Equipment Company (Owatonna, MN) has introduced the CTS 12 Rip-R-Stripper for floor-covering removal projects. The machine can remove ceramic tile, hardwood floors, and other tough floor coverings. The CTS12 acts as a tool carrier for electric-powered breakers with ratings between 30 and 40 foot-pounds of force.
The new TankJet 360 Fluid Drive Tank Cleaner from Spraying Systems Co. (Wheaton, IL) is equipped with a dual- or triple-nozzle hub and high-impact solid stream nozzles that rotate 360° in horizontal and vertical planes. The rotation cleans tanks up to 100’ in diameter, and can remove the stickiest of residues, according to the company.
Sensor Products Inc. (Madison, NJ) has announced the Fuji Prescale pressure film, which reveals pressures from two to 43,200 PSI. The Mylar tactile pressure-indicating sensor film instantly reveals surface pressure magnitude and distribution between contact or impacting surfaces. When placed between the surfaces, it permanently changes color directly proportional to the pressure applied.
According to Hyde Tools (Southbridge, MA), tool clutter has pushed many users toward tools with multiple uses, such as its 14-in-1 Multi-tool, with four screw bits in the handle, plus 10 other common uses. Hyde’s newest tool combines a high-quality, lightweight design with a tool that can scrape paint, spread compound, clean rollers, remove putty, scrape convex surfaces, open cans, and pull nails, among others.
Shurter (Santa Rosa, CA) has announced the addition of the V-Lock cord retaining system for 10A and 16A appliance couplers and power entry modules. The V-Lock power cord provides a safe and reliable power connection that latches into the notched inlet to prevent accidental disconnection of the power from the equipment.
Damotech (Boisbriand, Canada) has introduced the Damo Super Guard, which protects pallet racks in warehouses from damage, typically from forklifts. The Super Guard offers an extra level of durability, including five anchor bolts with high shearing capacity to sustain the most common impacts in warehouse environments.
Rustlick (Glenview, IL), a subsidiary of ITW ROCOL North America , has announced the release of ULTRACUT Aero, a new premium water-soluble oil optimized for high-tech ferrous and nonferrous metals, including titanium, aluminum, Inconel, and stainless steel. The Aero uses the latest lubrication and antimicrobial technologies to create a long-lasting cutting fluid.
Pharmaseal Scrubs LLC (Riviera Beach, FL) has introduced the Truck-Gard modular protective covers for Class 3 Walkie pallet trucks in all makes and models. The covers allow full functionality of the truck with the cover on, including battery charging. All nameplates, placards, controls, and safety components are easily-accessible as well.
Precision Quincy (Woodstock, IL) now offers the #49C-650D, an electrically-heated oven, which is available in NFPA 86 Class ‘A’ or Class ‘B’ configurations. According to the company, the oven is a popular choice among heat processors for most curing, drying, and pre-heating needs.
For applications where flexible, high-performance bonds are required, Master Bond (Hackensack, NJ) has developed its Polymer System EP37-3FLF, which is suitable for castings with wider cross-section thicknesses. According to the company, the polymer is serviceable over the wide range of 4K to 250°F, and it cures at room temperature in two to three days, or faster at elevated temperatures.
Rotor Clip Company, Inc. (Somerset, NJ) now offers its MST-series of Truwave wave springs. The single-turn metric wave springs are available in sizes from 16mm to 170mm and are ideal for short deflection applications, according to the company. Advantages of the Truwave springs include: The ability for the springs to be installed automatically via a tapered mandrel similar to the automatic installation of retaining rings.
Design for Reliability (by Daniel T. Daley), is a new book available from Industrial Press (New York, NY) that addresses the process from the manufacturer’s viewpoint, allowing readers to deliver the goods that their customers want. According to the company, the book is ideal for anyone involved in the design, development, or purchase of new assets.
WeldSeal from IMPCO Inc. (East Providence, RI) is a brush-on methacrylate compound formulated for sealing porosity in welds that will contain gases under pressure, or liquids. The low dynamic viscosity allows it to move into pores and seams, or close-fitting ferrous metal surfaces. Additional benefits include: A mixture that is a VOC-free, low-viscosity, and pale blue liquid that can be easily applied by a brush.
The Escalator Chain Lube — available from Royal Purple (Porter, TX) — is a high film strength synthetic lubricant designed for a variety of chains, including those used in automotive and industrial applications. According to the company, it can reduce lubricant consumption by as much as 75 percent, along with reducing noise levels and extending the life of chains.
LPS Laboratories (Tucker, GA) has introduced the Clean Penetrating Grease, a high tack, clear grease that contains PTFE to enhance the lubrication performance and reduce friction. According to the National Lubrication Grease Institute (NLGI), Clear Penetrating Grease has a rating of 1 to 1.
Mountz, Inc. (San Jose, CA) has developed a new line of cordless screwdrivers to their FlexPower-branded lineup, designed for torque control and durability. The tools are built around the 10.8V and 14.4V high-capacity lithium-ion battery platforms. According to the company, they are ideal for applications where air or electric power is not easily accessible, and they automatically stop when the preset torque has been reached.
The new Oil Eater Floor Cleaner from Kafko (Skokie, IL) comes packaged in a 1.5 oz. pouch, and simplifies the task of cleaning floors and walls, according to the company. The pre-measured packets help maintain proper dilution and control wasteful overuse, while still being compatible with a mop bucket or floor scrubber.
Henkel Corporation (Rocky Hill, CT) has introduced two Loctite Structural Acrylic Adhesives formulated to fixture in just five to 20 minutes. The Loctite H8100 and H8110 Speedbonder Structural Adhesives provide excellent peel and shear strength once cured, and the bonds are designed to reduce or eliminate welds, rivets, and threaded fasteners.
The True Union Ball Valves — from Spectrom Parts (Grand Terrace, CA) — come in 1/2”, 1”, 1-1/2”, 2”, and 3” sizes, and are constructed of Georg Fisher PVC or CPVC. They have threaded or rocket connections, with the option of EPDM or Viton seals. TUBCs come in standard pipe sizes so they will work with any matching sized and material piping system.
The AbrasiMatic 300 abrasive cutter from Buehler (Lake Bluff, IL) now features the optional X-Bed for increased convenience when sectioning in the x-axis direction. The accompanying digital display tracks x-axis travel, improving precision, consistency, and repeatability in serial (parallel) sectioning applications.
LPS Laboratories (Tucker, GA) has announced its 50th anniversary with a limited edition of the United States LPS 1, LPS 2 Industrial Strength Lubricant, and LPS 3 Heavy-Duty Rust Inhibitor. The aerosol cans come with a “retro” look, which is similar to the design of the original cans in the early 1960s.
Trident Design, LLC (Las Vegas, NV) has announced three new marketing partners (NCC, Bits Limited, and Accell) for its PowerSquid, which eliminates the problem of overcrowded power strips and bulky power adaptors with a unique “tentacled” design. The PowerSquid comes in a variety of models, ranging from basic outlet multipliers to advance surge protectors.