Styles available offer high levels of cut, puncture, and impact resistance and are available in sizes ranging from extra-small to extra-extra large, depending on glove type.
The DuraLabel Custom Label Service provides the enhanced communication effectiveness of full-color custom labels and signs, without the expense of an outside service.
The “Three-Barrier Solution” consists of factory-sealed spherical roller bearings, split pillow block housings, PosiTrac Plus™ type seals, and 60 to 80 percent grease fill inside the housing.
The new unit will charge M18™ or M12™c ompact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes.
The 70 watt explosion proof LED lamp of this scaffold mounted light produces over 6,000 lumens of clean white light.
The Fabricator 211i is a fully integrated MIG-Stick-TIG inverter welding system that weighs 57.3 pounds and offers the flexibility of using 115 or 208/230 VAC single-phase primary power, 50, or 60 Hz.
The Combinator, designed for performance and safety, eliminates the need to change abrasive wheels during cutting and grinding applications, explains the company.
The shaft-mounted gear units are available with TorqLOC, SEW-EURODRIVE'S compact keyless hollow shaft mounting system.
The Circuit-Safe circuit breaker lockout system provides a permanent solution for circuit breaker lockout, according to the company.
Wilcoxon triaxial sensors, cables, and connection boxes are appropriate for monitoring most industrial rotating equipment including cooling tower fans, blowers, pumps, and compressors.
New Welted design provides support and protection, delivering the flexibility of a welted product and virtually eliminating the de-lamination often seen in traditional welted boots.
Ideal for maintenance and storage areas, the PIG® Battery Acid Spill Kit contains PIG® Socks, loose absorbents, and wipers formulated specifically for neutralizing and cleaning up battery acid.
The Max-Lok™ Carbide Extension System was designed to extend and increase the versatility of SDS-MAX rotary hammer bits.
The belts provide a linear grain scratch pattern for blending stainless steel welds and are designed to prevent gouging and undercutting.
The video shows exactly how each Morse lifter is factory load tested in East Syracuse, New York, says the company.
Ingersoll Rand has added a run-on timer and load/unload and blowdown solenoids to improve the reliability and performance of single-phase units in these applications.
This all-in-one, interchangeable device comes with a 110/66 cut-style punch down blade, both Phillips and slotted screwdriver tips, and converts to a nut driver or a hex key.
The addition of Silicone to Kroil can enhance its water displacement qualities and improves its performance as a cutting oil.
These machines are capable of creating innovative product designs, applying precision metalforming techniques, and providing over-and-above customer service, says the company.
The new MultiFLOW Blowgun effectively cleans surfaces with air or water with unparalleled blowing force, according to the company.
The FILTAIR®Fume Extraction Gun is available in 300- and 400-amp configurations and is ideal for solid wire welding applications.
The CoroDrill 862 has a thin TiAlN coating to helps retain cutting edge geometry and provides a smooth surface for chip evacuation.
The portable TKRS 10 Stroboscope facilitates inspection of rotating or reciprocating machinery in a “flash” without stopping the machinery or otherwise interrupting operation.
Tuff-Seal with DOW ECOLIBRIUM™ is now 70 percent derived from natural resources and formulated without the use of phthalates or lead.