The Force 5® air gun is designed to deliver the extreme power necessary for heavy duty industrial cleaning and maintenance applications, says the company.
The certified products are wire-end ferrules with insulating plastic collars for cross-sections ranging from 0.25 mm² to 50.0 mm² (AWG 26-1), with the exception of 35.0 mm² (AWG 2).
The Flow/Level/Temperature (FLT) Pump Protection Flow Switch monitors the flow and temperature of liquids, gases, slurries, syrups, lubricants, coolants, and more.
The dyes are available in a choice of seven distinct colors to help differentiate between leaking fluid systems, especially those leaks where portions of the hoses are hidden from view.
The lightweight Y10MRSA1 features a compact narrow nose useful in tight access areas along with an ergonomic design requiring less handle force for ease of operator use.
RapidPrep features a new non-woven substrate with an improved resin bond system designed to eliminate smearing and loading, two common problems in most surface conditioning applications, as well as providing improved edge wear.
This new fish tape is made with a non-conductive tape, tip, and case for added protection against energized circuits; end-user research has confirmed that the number one concern for all electricians is their safety.
The operator chair is located in the carrier, complete with color touch screen, providing critical real-time information about the crane systems to the operators.
J Series pumps are a single stage venturi vacuum pump that allows ingested contaminants to flow through the pump without clogging ensuring continuous operation.
Armed Workwear’s new pants will save wearer’s knees with their built- in, removable knee pads, says the company, while nine custom pockets will stop the “hunt for tools game.”
Nitrogen and oxygen generators allow manufacturers to generate their own gas supply on site and providing greater economies of scale for cost savings.
Each motor size has outputs ranging from 2 to 10 HP with speed capabilities from 500 to 4,000 RPM.
The new Turbo Nozzle is a powerful new ceramic tip designed for blasting and removing stubborn and encrusted stains.
The black nylon filaments are co-extruded with an engineered ceramic abrasive grain, providing cut rates up to 400 percent faster than silicon carbide or aluminum oxide filaments.
Panther Premium Leather Welder’s Gloves feature a thick lining and a double-layer leather thumb joint to protect worker’s hands from heat and hot tools.
Comark’s NEMA 4X Workstation is completely sealed against the elements, corrosion resistant, and constructed out of rugged stainless steel.
These knits are dual hazard, protecting against both arc flash and flash fire. Workrite is having them certified to both NFPA 2112 and NFPA 1975, and they meet Hazard Risk Category 2 for NFPA 70E.
The QuickRack modular transport-and-assembly frame is made from telescopic support and brace modules that permit length adjustments at any point.
99.8 percent pure anhydrous (minimal water) IPA is excellent for defluxing, fiber optics maintenance, stencil cleaning, tool cleaning, tape-head cleaning, and other light-duty cleaning, says the company.
This chuck is modified for Spring Clamp and air open, using Nitrogen compressed gas springs in the spring clamp mechanism.
The secuRgrip system has a TIR of 0.0001 inch and enables manufacturers to preset their tool heights.
The new OSHA guard safety scale that can be used to check the openings in barrier guards during their design, installation, and inspection for compliance with Table O-10 of OSHA 29 CFR 1910.217.
The product is ideal for applications requiring torque specifications that include tightening to an angle beyond a specified torque value.
This eco-friendly welder is great for repairing virtually anything made of breakable plastic and affords users the ability to save on broken products that would otherwise have been prematurely discard.