Industrial Maintenance & Plant Operation

Products

Subscribe to IMPO Magazine Product Releases
View Sample

FREE Email Newsletter

IMPO Insider

Daily industrial news and top headlines for plant and maintenance managers

Analog-Compatible Draw Wire

November 10, 2009 10:57 am | Comments

Kübler by TURCK (Minneapolis, MN) has expanded its draw wire series, designed to work with sensors and encoders with analog outputs, with versions that measure distances ranging from 0.2 to 40 meters. Compatible outputs include 0 to 10 volt, 4 to 20mA, and potentiometers, as well as incremental (push-pull and RS422), absolute (SSI and BISS), and fieldbus interfaces.

TOPICS:

Gas Leak Simulator

November 10, 2009 10:57 am | Comments

Gassonic (Redlands, CA) has developed the first gas leak simulation tool for ultrasonic gas detection, which helps demonstrate the major advantages of implementing ultrasonic detectors for high-pressure gas leaks. The system responds to the distinctive ultrasound created by the leak without having to wait for gas to accumulate (conventional point detector) or within a narrow beam (open path gas detector).

TOPICS:

Flammable Liquid Grounding

November 9, 2009 10:27 am | Comments

GoatThroat Pumps (New York, NY) announces their SCP-6500 pump, which allows containers holding flammable liquids to be grounded, which makes them safe for use with Class 1 and 2 flammables. All components of the new pump which come in contact with the fluid are created with conductive plastic so that the system remains grounded.

TOPICS:
Advertisement

Light-Duty And Pop-Up

November 9, 2009 10:26 am | Comments

The pop-up transfer conveyors from TKF (Cincinnati, OH) are light-duty units designed to handle loads up to 250 pounds with motorized roller-driven strands, eliminating noisy chain drives. The conveyors also do not use vertical guides or cam ramps for positioning, which simplifies maintenance.

TOPICS:

Compressors, Redesigned

November 9, 2009 10:26 am | Comments

Sullair Corporation (Michigan City, IN) announces the redesign of their 200 HP compressors offered with a choice of constant speed drive models (the LS-200S) or constant speed drive with variable capacity control (the VCC-200S and VCC-250S). The VCC models use Sullair’s spiral valve technology, which allows the compressor to match pressure and capacity with system demand, lowering energy usage.

TOPICS:

Be A Square

November 9, 2009 10:25 am | Comments

Pinpoint Laser Systems (Peabody, MA) introduces a new right 90-Line Square Plane, ideal for squaring machinery and equipment, setting up presses, checking machine tools, aligning guide rails, among other uses. The 90-Line Square Plane is designed to be placed in the path of a laser reference beam to form a precise right angle for checking alignment.

TOPICS:

Network Meshing

November 6, 2009 10:43 am | Comments

Detcon (The Woodlands, TX) has released the Model RXT-300 wireless mesh-network transceiver, designed to transmit signal data in a wide range of industrial applications. The transceiver operates at 2.4GHz, and processing power is shared, allowing each transceiver to act as both a router and repeater.

TOPICS:

Protect Your Conduits

November 6, 2009 10:42 am | Comments

The OCAL-BLUE Form 8 PVC-coated cast-iron conduit body from Thomas & Betts (Memphis, TN) now carries the UL Type 4X and NEMA Type 4X ratings on sizes up to two inches. These ratings assure conduit protection and corrosion-resistant performance in wash-down areas and outdoor environments.

TOPICS:
Advertisement

Modular, Custom Machining

November 6, 2009 10:41 am | Comments

MAG (Sterling Heights, MI) has redesigned its modular HMC 1250 Series machining tool with a new 180,000 position A-axis tilt spindle for 5-axis horizontal machining on large parts. The new 6,000 rpm/ 46 kW tilt spindle is engineered for machining large equipment parts for aerospace, pump, or valve applications.

TOPICS:

Breaking Up Is Easy

November 6, 2009 10:41 am | Comments

Eriez (Erie, PA) is introducing the PolyMag Process, which provides multi-material plastic processors with material savings by creating a material that incorporates separation characteristics into the design. By introducing less than one percent of the PolyMag Additive, the leftover scrap resin from co-injection, two-shot injection, or overmolding processes can be separated with high-intensity magnets.

TOPICS:

SmartBobbing For Apples

November 5, 2009 4:07 am | Comments

BinMaster (Lincoln, NE) announces the SmartBob-SS sensor, which is designed to measure solids submersed under water. The sensor is a solution for brine interface applications, such as measuring the level of settled salt under water. The SmartBob-SS drops a weighted bob through the liquid, and when the bob comes in contact with solid settled material, it retracts and sends a measurement to a PC loaded with eBob software.

TOPICS:

Counting, Made Easy

November 5, 2009 4:07 am | Comments

Mettler Toledo (Columbus, OH) introduces the BBA449 counting scale that allows molding machine operators to more effectively supervise their machines. The colorWeight display alerts operators if boxes are full with a visible display—useful for operators responsible for multiple machines.

TOPICS:

SuperStar Of Filters

November 5, 2009 4:06 am | Comments

The SuperStar .01 Micro Filters from LA-MAN Corporation (Port Orange, FL) are designed to be installed at the point of use to remove moisture and contaminants from air lines to improve the life cycle of tools and equipment. The four-stage design operates most efficienty within 25 feet of the point of use, and has a flow range of 50, 75, or 100 SCFM with pressure ratings of 250 psi.

TOPICS:

Linear Bearings That Won't Break

November 5, 2009 4:05 am | Comments

Thomson (Wood Dale, IL) introduces the RW64-V RoundWay Linear Roller Bearing, a 4” version with a dynamic load capacity of 70,000 lbf (310,800 N), more than 20 times the load capacity of a conventional linear ball bearing. The RoundWay can carry that load even at operating temperatures up to 500°F and speeds up to 100 ft/s (68mph).

TOPICS:

TFT Panels For Your Interfaces

November 3, 2009 9:45 am | Comments

AutomationDirect’s (Cumming, GA) line of C-more operator interfaces now includes two new 6” TFT color panels with LED backlights. Both panels are NEMA 4/4Z, IP65 compliant when mounted correctly for indoor use. Individual features of the two models include: EA7-T6CL-R: 320x240 resolution QVGA display supporting 65,536 colors.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading