High-capacity pumps from KNF (Trenton, NJ) have been designed to meet the demanding flow and vacuum requirements in air/gas sampling and analytical instrumentation applications. An electrically-operated diaphragm allows for easy customization with a variety of pump designs.
Bunting (Newton, KS) has launched an addition to its material handling product line, the DragSlide conveyor, designed to convey shredded plastic films or light fibrous materials. The DragSlide has been engineered to avoid the issues typically found with belted conveyors, namely clinging to the belt.
Wilcoxon Research (Germantown, MD) introduces two compact industrial accelerometers, the 780B and 780C, rounding out the family of narrow, low-profile, and lightweight sensors. Both sensors are 100 mV/g general purpose vibration sensors, with the 780B featuring a + 10 percent sensitivity tolerance, and the 780C featuring a + 15 percent tolerance.
Randolph-Austin (Manchaca, TX) has released the TP 1000 V, designed as an extremely precise meter or bottling peristaltic pump. The pump can be operated in a semiautomatic mode or be fully integrated through a RS-232 connector as an automatic filling or metering machine.
Gardco (Pompano Beach, FL) has developed the FX-iWP, the first waterproof and dustproof compact precision balance, which incorporates the reduced-sized Super-Hybrid Sensor to provide quick readings with high precision. Six models are available from 120g x 0.0001g to 3200g x 0.
SafeRack (Sumter, SC) has announced its redesigned SafeRack G4 Gangway. The G4 uses metal-stamping technology to create a stronger gangway that is at the same time lighter and smoother to operate. The G4’s parts, most often aluminum, are stamped out in a tool-and-die process and then formed by bending the metal into the required shape, eliminating the need for welding.
Balluff (Florence, KY) introduces the Micropulse ProCompact linear position transducer, which is designed to be rugged, accurate, and protected against environmental hazards. The Micropulse utilizes non-contact magnetostrictive technology in a welded, hermetically-sealed stainless steel housing, which provides long-term reliability and service life.
La-Man (Port Orange, FL) has developed a series of Extractor/Dyers that are designed as a point-of-use filter to efficiently remove moisture and contaminants from compressed air systems. The Extractor/Dyer is a two-stage filter designed to operate most effectively within twenty-five feet of the point of use.
The Place-A-Vent Portable Fume Extractor (PFE) from Vent-A-Kiln (Buffalo, NY) is a continuation of the original wall-mounted Place-A-Vent fume extractor, and utilizes a high-pressure fan unit fabricated with 14-gage steel housing. A self-cleaning cast aluminum wheel keeps maintenance easy.
E-Z Red (Deposit on the Delaware, NY) offers the Universal Interchangeable 8-Piece hook and pick set, featuring an ergonomic chemical-resistant handle with quick-disconnect. The tools quickly and easily pull clips, rings, seals, cotter pins, washers, and other small parts.
Industrial Press (New York, NY) has released a book by Ramesh Gulati, titled “Maintenance and Reliability Best Practices,” designed to provide a thorough understanding of how plant managers can operate their machinery more reliably and at a lower cost. The easy-to-understand style allows readers of all kinds — from seasoned plant managers and product designers to students looking to break into the field — to follow and learn the information.
Advance US (Plymouth, MN) now offers the Condor XL, a 67-inch wide rider-scrubber with 100-gallon solution and recovery tanks. According to the company, the Condor XL can cover up to 100,000 square feet of open floor space on a single tank of solution, increasing productivity and reducing cleaning costs.
WIKA (Lawrenceville, GA) has released the PSD-30, an electronic pressure switch with display, which can be used in machine-building, hydraulics, pneumatics, pumps, or compressors. The display is easily-readable and robust, and the PSD-30 features an intuitive setup. In addition, the switch is flexible for your particular application.
The Reznor (Memphis, TN) Model CAUA, a vertical gas-fired air handler is available with staged heating from 75 to 400MBH to provide the right amount of heat in non-extreme conditions. This system will save on energy usage particularly during the fall and spring, but also during mild winters.
Gateway Safety (Cleveland, OH) has developed the Serpent Ventilated Safety Helmet, designed to offset the adverse effects of working in hot weather. According to the National Institute of Occupational Safety and Health, workers in hot environments face the risk of heat stress, which can lower mental alertness and physical performance, particularly when wearing safety clothing.
Martin Tool & Forge (Fort Worth, TX) has three styles of drop-forged, heavy-duty striking wrenches, including the offset 12 point, straight-pattern 12 point, and “roughneck” straight-pattern six point. All three styles are produced using alloy steel and are heat-treated for extended life, especially when used on difficult fasteners requiring large amounts of force.
Cotronics (Brooklyn, NY) has engineered the Thermeez 7030, a ceramic-based sealer that is ideal in high-temperature (up to 1,800°F) applications, notably exhaust systems, diesel engines, gas turbines, and heating plants. Unlike epoxy-based adhesives, the 7030 sealer provides high expansion even in the warmest environments.
Gardco (Pompano Beach, FL) has developed the Feritscope, which measures the ferrite content in austenitic and duplex steel. Welds that must survive the rigors of processing plants, where heat, aggressive media, and pressure are all present, can crack if the ferrite content is too low, and become weak if the content is too high.
Royal Adhesives and Sealants LLC (South Bend, IN) announces the launch of its new line of Silaprene LVOC (low-volatile organic content) contact adhesives and cements. These new adhesives and cements are EPA-compliant and contain less than 250 grams per liter of VOCs compared to over 600 grams per liter of VOCs in traditional solvent-based contact adhesives and cements.
Detcon (The Woodlands, TX) has reengineered its gas detection sensor, named the Series 200 UniTox, to included a significantly-improved mechanical assembly and a more economical price. The UniTox line incorporates a common Universal Transmitter Module with a wide range of Intelligent Sensor Modules (ISM) capable of monitoring more than 40 toxic gases.