Steam Jenny (Somerset, PA), a division of Jenny Products Inc., has introduced four new models of belt-drive cold pressure washers, which provide a longer pump life than direct-drive units. The washers are powered by 9 or 13 horsepower Honda GX Series engines, with pressure ratings between 3,000 and 4,000 psi and flow rates between 3 and 4 gpm.
The Champ VMV LED Series from Cooper Crouse-Hinds (Syracuse, NY) provides the same reliability of a traditional Champ luminaire, combined with the improved energy efficiency and long life of LED technology. Improved temperature ratings and enhanced visibility with full spectrum lighting provide a safer work environment in hazardous and industrial locations.
The Thermocouple Mini-Grabbers from Electronic Development Labs (EDL, Danville, VA) provide a continuous thermocouple connection from bare wires to the measuring instrument without the need to attach plugs. The continuous thermocouple material, from trip to mini plug, offers a better and more convenient connection when compared to copper wire, according to the company.
EZ-Red (Deposit on the Delaware, NY) has introduces a magnetic clip accessory for the Extreme Light XL3000—the XL3000MAG. The clip features strong neodymium magnets covered with durable, non-scratch rubber. Using the magnetic clip, the XL3000 will attach to any steel surface for more versatility.
Coilhouse Pneumatics (East Brunswick, NJ) has released the Typhoon blow gun line makes blow-off and clean 132oup easy. The new OSHA-compliant tips are designed specifically for the Typhoon and include: A pinpoint tip for a precise air stream to clean crevices.
The Magnalight.com website from Larson Electronics (Kemp, TX) has added to its range of explosion-proof and general area LED lighting with a series smaller than a quarter. The LEDSM30 and LEDSM30MW draw only 30mA and operate on 12 volts DC, and are waterproof, dustproof, and US Coast Guard-certified ignition proof.
Omron Electronics LLC (Schaumburg, IL) has introduced its compact Trajexia motion controller module that integrates into CJ-Series PLCs to handle complex motion tasks for up to 30 serves or inverters. The module is fully compatible with a variety of processors (CJ1M, CJ1G, and CJ1H), and advanced programmable automation controllers.
The Model 590 Micro-Pneumatic Cutter from Xuron (Saco, ME) is an air-operated flush cutter that can be supplied with three different cutting heads: standard, standard with a lead retainer, and low-profile for reaching into densely populated PC boards. The tapered rectangular shape fits comfortably in small or large hands for the repetitive cutting of up to 16 AWG wire.
The T300 and B300 infrared cameras from FLIR Systems (Billerica, MA) are able to capture detailed images and video with a 320 x 240 focal plane array (FPA) detector (76,800 pixels). The T300 features a 2 percent thermal accuracy, 30Hz frame rate, <0.05ºC thermal sensitivity with a temperature range of -20ºC to 650ºC, and an optional range up to 1200ºC.
BEI Industrial Encoders has introduced the Omnicoder, an incremental encoder that allows users to easily program the resolution anywhere between 1 and 10,000 counts per turn. Users can produce a wide range of resolutions from one encoder and can be reprogrammed to change the resolution through an M18-to-USB programming cable.
The MacSTANDARD line of linear actuators and belt drives from Macron Dynamics (Croydon, PA) are designed to provide “off-the-shelf” components suitable for industrial linear motion, robotics, and automation applications. The actuators are available in travel lengths from 184 to 2,242mm with maximum speeds of 1,270 mm/sec to 15,240 mm/sec.
The Model 1640 from Detcon (The Woodlands, TX) is a newly designed gas detection alarm and control with a microprocessor-based control card to supervise and display the condition of 16 field-mounted gas detection sensors with either 4-20mA or serial RS-485 output. A backlit display provides indication of gas type and current reading in normal operation.
The Mini-Hermet from SOR (Lenexa, KS) is a robust pressure switch for field-mounting with a hermetically-sealed, explosion-proof steel housing. In addition, the set point can be adjusted without declassification of the hazardous area. The switch is ideal for hazardous locations where stainless steel exterior parts are required and where space is limited, notably offshore platforms or lube oil systems.
The Duro-Tank Stainless Steel Recirculating System from A.W.T. (Chicago, IL) has been designed for use with a washout sink and uses biodegradable chemistry to clean a variety of objects. The closed-loop recirculating system uses multistage filtering to reduce chemical consumption by as much as 80 percent.
Atlas Copco (Westfield, MA) announces the introduction of its redesigned oil-injected screw compressor range, the GA 5-11/GA 5-15 kW Variable Speed Drive (VSD). The new edition features an eight percent increase in free air delivery while keeping noise levels as low as 60 decibels.
The Tite-Space BST AGV Tugger from Creform Corporation (Greer, SC) is well suited for delivering to line-side assembly points when space is at a premium. With a minimum turning radius of 400mm, the Tite-Space slips easily into tight spots. Additional features include: A low-profile, sleek design with drive motor, 24 Volt DC power supply, and guidance sensors.
Racine Vortex (Racine, WI) has released the RNS Series (Insertion) and RWS Series (Wafter) Vortex Steam Flow Meters, which are suitable for measuring non-condensing steam and saturated process stem and pressures up to 150 psi. Both meters have no moving parts and feature the HART communication protocol for ease of field programming and system integration.
From Hydro Systems (Cincinnati, OH) comes the Hydro ICS Touchless Cleaning System for use as a part of a facility’s daily cleaning regimen. The system can reduce energy consumption, water usage, and chemical consumption in addition to helping a facility meet GS-42 or LEED compliance.
TURCK (Minneapolis, MN) has announced a new line of Kübler robust magnetic linear encoders. The T8.LI20 and T8.LI50 are available with either a push-pull output or an RS422 interface and provide a voltage range from 4.8 to 30 VDC. The linear encoders are used with magnetic bands that are attached to the mounting surface and are protected by a stainless-steel cover.
Hi-Tec announces the release of the Sidewinderbarrier, which adds a vinyl wall of protection at sensitive points in the factory or other strategic locations. The 6” x 6” Sidewinderbarrier tower is bolted to the floor, and when needed, one can pull the vinyl panel to a distance of 12 to 18 feet.