GE Fanuc Intelligent Platforms (Charlottesville, VA) has announced the release of its latest VersaMax Micro Plus controller firmware revision 4.0. The new OnLine Programming feature enables the user to edit and download logic to the PLC without stopping it, which saves significant downtime and potential expense for lost productivity and scrap.
The Industrial Pulley Puller (Marion, IA) is the portable, one-man hydraulic tool that removes any object from a shaft in minutes without torches, hammers, or crowbars. According to the company, the Hydraulic Industrial Pulley Puller makes the entire process an easy job for just one person.
Permabond’s (Somerset, NJ) 791 adhesive is a surface insensitive cyanoacrylate, ideal for applications involving close-fitting components, and meets the specifications for Commercial Standard A-A-3098 Type II Class I. Permabond 791 has a high tensile strength and a very high shear strength, lending it to applications that previously required a slower-curing structural adhesive.
The QAS 600 generator from Atlas Copco (Commerce City, CO) is the largest in the range, rated at 575 kVA at 60 Hz and powered by a Volvo TAD 1641 GE diesel engine coupled to a 239-gallon standard fuel tank. The QAS 600 is housed in zinc-plated steel with a powder coat finish, which provides protection against corrosion.
The new FasTrax Clean high-performance door from Rite-Hite Doors, Inc. (Milwaukee, WI) has been designed to withstand the rigors of harsh washdown environments while allowing users to maintain the highest levels of cleanliness. The door’s design minimizes areas where unwanted materials can be trapped, making it USDA- and FDA-compliant.
Techni-Tool (Worcester, PA) announces the Tec-Cut Infinity Elite fine electronics pliers and cutters. The six new micro-cutter models can cut electronic wires from 18 to 20 AWG, and have a micro-sized head for fitting into tight spaces. Cutter heads are available in oval and tapered styles, with a choice of semi-flush, flush, and full-flush cuts.
Seiffert Industrial (Richardson, TX) now offers the RollCheck Green , a visual tool used to speed up parallel roll alignment checks using the latest in green laser technology. Reflected beam technology provides an accurate, fast, and simple way to measure and correct vertical angle (pitch) and horizontal angle (parallelism) between the rolls.
The 100 percent metal-free DrumQuik PUR chemical dispensing system from Colder Products Company (St. Paul, MN) provides safe and economic extraction of high-purity chemicals from drums, jerry cans, and intermediate bulk containers. The system is composed of two components: a PVDF coupler and a HDPE drum insert assembly, which contains a bung closure and dip-tube.
Olympus (Waltham, MA) introduces the new i -SPEED LT, i -SPEED TR, and i -SPEED FS high-speed video cameras. The FS model is designed with a highly accurate IRIG-B time synchronization (sub 5 microseconds) and time stamping, a global shutter speed to 0.2 microseconds, and a top frame speed of 1,000,000 frames per second.
The MP100 from E-Instruments (Langhorne, PA) is a compact and rugged manometer for the HVAC professional. The meter includes leak test procedures and air velocity with density compensation. A large backlit LCD display helps readability in either light or dark environments.
Tripp Lite (Chicago, IL) has a new high-wattage 2200VA SmartPro UPS system, which protects mission-critical equipment. The system provides 2200VA/1920W capacity for loads in just 2U of rack space and offers high-efficiency operation. Additional features include: Eight outlets with three separately breakered, individually-controllable load banks to support remote reboot or automated load shedding.
Nordson ASYMTEK (Carlsbad, CA) introduces the CPJ+ (Calibrated Process Jetting Plus), which reduces process variability to maintain a constant Takt time by ensuring consistent flow rates. Using the proprietary Fluidmove software for Windows XP, the CPJ+ automatically compensates for fluid viscosity changes over time and batch-to-batch variations.
MovinCool (Long Beach, CA) now offers the CM25 self-contained, ceiling-mounted air conditioner with a total capacity of 25,000 Btu/h. The compact CM25 was designed for server rooms with its 20” height, build-in mounting bracket, and vibration isolators. A variable-speed inverter compressor and inverter fan motor gives the CM25 a 14 SEER (seasonal energy efficiency ratio).
The MH052 pipe sealant from Permabond Engineering Adhesives (Somerset, NJ) has BAM approval for use in oxygen-rich environments (up to 145 psi and 140°F) due to its unique, stable formation. Normally, anaerobic sealants cannot be used in oxygen-rich environments due to instability, which could cause fire or explosions.
Carlo Gavazzi (Buffalo Grove, IL) has launched the RSBS Series Single-phase Plug-and-Play Soft Start, which reduces the amperage demand when starting heat pumps. By maintaining the starting current below fixed limits, the RSBS avoids high energy tariffs and reduces heat dissipation, allowing for a 60 percent reduction in current.
Kin-Tek Laboratories, Inc. (Marque, TX) announces the 491M-PB Module, which is used with 491M Modular Gas Standards Generators to maintain steady gas pressures within the unit and balance backpressure to the delivery system pressure. At trace concentrations (PPM, PPB, and PPT) of reactive gases, surface absorption within the transport system can significantly affect the actual mixture delivered.
Lubrication Engineers, Inc. (Fort Worth, TX) adds to its growing arsenal of reliability solutions with its new Clear Grease Guns, a simple, cost-effective solution for avoiding costly grease cross-contamination errors. Clear Grease Guns ensure 100 percent visual grease identification.
Magnatag (Macedon, NY) offers the CardView Kanban boards to coordinate inventories and lean workflows. The kits come in five formats: Next-Job, Build-Board, Job-Load, To-Do, and On-Hand. Each comes ready to use in six size capacities, including kanban cards in 17 colors, card printing templates, color pocket tapes, and press-on FlashSpot so customers can tailor the board to their needs.
Matrox Graphics (Montreal, Canada) announces the launch of the M9188 PCIe x16 Octal graphics card, capable of supporting eight DisplayPort or DVI Single-Link outputs from a single workstation. Resolutions up to 2560x1600 per output are supported by 2GB of memory with support for Microsoft Windows XP and Linux.
Kübler by TURCK (Minneapolis, MN) has expanded its draw wire series, designed to work with sensors and encoders with analog outputs, with versions that measure distances ranging from 0.2 to 40 meters. Compatible outputs include 0 to 10 volt, 4 to 20mA, and potentiometers, as well as incremental (push-pull and RS422), absolute (SSI and BISS), and fieldbus interfaces.