Rulmeca Corp. (Wilmington, NC) has announced that their Grease Canister Kits are now a standard feature with the “Labyrinth Seal Option” Motorized Pulleys, including models 220M, 220H, 320L, 320M, 320H, 400L, 400M, and 400H. The canister helps maintain the labyrinth seal to provide an extra barrier of protection for shaft oil seals by forming a grease-filled path for corrosive and abrasive material.
The Demag DC-Pro Chain Hoist from Demag Cranes & Components (Cleveland, OH) has an extended service life of up to 1,900 hours, which results in increased time between service intervals and general overhauls. Many components are maintenance-free for up to 10 years, helping lower operating costs.
Forsta Filters Inc. (Los Angeles, CA) has released its Green-Clean industrial water filter technology, which can reduce backwash waste water by as much as 75 percent. Without interrupting system flow during backwash, Green-Clean technology utilizes smaller flush valves to minimize the volume of water required to remove buildup on a filter element.
Mountz, Inc. (San Jose, CA) has introduced new torque tool options for ensuring the correct torque is applied in applications involving RF/COAX and SMA connectors. In applications using stainless steel or beryllium-copper bodies, the correct tightening of connectors is important to ensure optimum performance.
K88, a penetrating fluid from LPS Laboratories (Tucker, GA), is now available. The fluid features a high solvency, low surface tension, and special additives to enhance penetration, lubrication, and corrosion attack. According to the company, KB 88 meets local, state, and federal VOC regulations, such as those of the California Air Resources Board (CARB).
DEUBLIN Company (Waukegan, IL) introduces the Slip Rings, an electrical device that allows the transmission of power from a stationary to a rotating structure. The rings from DEUBLIN can be easily configured for both power and signal connections, and are compatible with Ethernet, Profinet, RS-232, RS-485, RS-422, CAN, as well as generic analog signals.
The Prolite polypropylene tubing from NewAge Industries (Southampton, PA) is made from a NSF-61 (National Sanitation Foundation) semi-rigid compound, and can be used in food processing, chemical lines, dispensing equipment, compressed air, and more. Features of the Prolite tubing include: Chemical and corrosion resistance, and a low moisture absorption.
KT Pro Tools (City of Industry, CA) has released the Adjustable Slip-Jaw Wrench, which simplifies normal adjustable wrench operation. Once the jaw is adjusted to the size of the fastener, the user no long has to remove the tool and re-attach to continue tightening; the tool can be indexed back to the original position without removing the wrench from the fastener.
TRUMPF (Farmington, CT) will showcase a number of new products at the AHR Expo in Orlando, Fl. between January 25-27. The TruTool series of tools includes the S 130, developed specifically for thin-sheet users, measuring only 10”x15” and weighing in at 3 pounds with its battery.
Akro-Mils (Akron, OH) has expanded its Super-Size AkroBins line with 24” length bins in two new sizes: 24”L x 11”W x 7”H and 24”L x 18.25”W x 12”H. The AkroBins feature optional width and length dividers that allow for even more effective parts separation and versatility in organization.
Rite-Hite (Milwaukee, WI) offers a range of HVLS (high-volume, low-speed) fans that help push air throughout your entire facility. According to the company, these fans can save as much as 30 percent on winter heating bills by destratifying the air. Check out the video for more information: To find out more about the HVLS fans, go to www.
Air Technical Industries (ATI, Mentor, OH) announces the Reversible Boom Crane operation with wireless remote or pendant control that offers safety and flexibility in lifting, handling, and transporting heavy loads in most narrow passageways. The unit can be remotely controlled for all functions, including propulsion, speed acceleration or deceleration, steering, mast rotation, and more.
R&M Materials Handling, Inc. (Springfield, OH) has released the NRGmaster, an alternative to C-track festoons. The NRGmaster system eliminates dangling cables and provides a sleek design, increasing hook coverage on the shop floor and decreasing common C-track festoon maintenance pitfalls.
Baumer (Southington, CT) has developed the Long-Range ParCon for sensing applications involving distances as far as 200mm. The analog optical line sensors project a continuous 24mm-wide beam of parallel light to a reflector, creating a reliable detection of moving parts as small as 0.
The MassTracker Insertion Turbine Multi-Variable Flow Meter from Spirax Sarco, Inc. (Blythewood, SC) combines measurement of mass or volumetric flow, density, temperature, and pressure into a single instrument. Typical applications include flow monitoring of steam or natural gas, flue gas for environmental compliance, or measurement of other liquids in line sizes from 3 to 80”.
Wildeck, Inc. (Waukesha, WI) introduces the new V-Lift, a hydraulically-operated, cantilever material lift that can be installed either in a shaftway or free-standing, with optional structural framing. The V-Lift is designed to meet ANSI/ASME B20.1 standards for conveyors, and features a hydraulic ram with large 2-1/2” diameter dual pistons to deliver a smooth lifting motion.
Dake (Grand Haven, MI) has released the VH200, a vertical hydraulic cylinder capable of bending tubing up to a 2” diameter. At 60 pounds, the unit it portable and can be operated in the field, with either a manual pump or an air-operated pump. The VH200 is furnished with one of three standard dies, for either a 6” or 7” radius, and 12 additional dies are available.
Kaba Access Control (Winston-Salem, NC) now offers the new LearnLok feature to its E-Plex PROX-based 5700 electric locks, in addition to the E5770 and E3700 series. The LearnLok feature simplifies programming of up to 300 user credentials (HID PROX cards, fobs, etc.) per door by “learning” them at the lock reader.
Fastenal (Winona, MN) offers a solution to industrial vending with the SmartStore, which is managed by the customer’s local Fastenal store team and stocked with the products they use most. Installation requires only electricity and Internet access, according to the company. Advantages of industrial vending include: Reduction in consumption by tracking employee usage and setting limits.
Dynabrade, Inc. (Clarence, NY) is introducing a series of air-powered Die Grinders, which feature high-quality steel housings. The grinders are available in either .5 or .6 hp air motors and use a rubber grip housing to insulate the operator from vibration and cold air transmission.