E-Z Drill (Stillwater, OK) now offers the E-Z Tray, a work tray designed for use on scissor lifts, boom lifts, aerial work platforms, and any equipment with railings. The E-Z Tray provides an ergonomically-friendly solution for the safe handling of tools while working at heights.
Sioux Corporation (Beresford, SD) has redesigned its EN-Series All-Electric line of hot water pressure washers and steam cleaners. The all-electric series now incorporates a more compact frame: the non-explosion proof units have a minimum 43 percent reduction in volume, while the explosion proof units have been reduced by at least 30 percent.
Binder-USA (Camarillo, CA) now offers a new torque wrench for its 7/8” Series 820 connectors. The tool is designed to connect and disconnect field-attachable cable connectors with hex-shaped locking nuts. The wrench ensures the correct torque value and guarantees an IP67-rated connection.
New Pig Corporation (Tipton, PA) introduces the tough PIG® RHINO™ Absorbent Mat, designed to stand up to heavy foot traffic while soaking up liquid and minimizing slips. Features include: A thermally bonded, spunbond polypropylene top layer with zig-zag stitching to enhance strength and resist wear and tear.
Atlas Copco (Antwerp, Belgium) announces its new technology for air blowing applications: the ZS screw blower, which will replace the company’s entire range of rotary lobe blowers. The screw blower can be used in food and beverage, pharmaceutical, pulp and paper, textiles, and other general manufacturing.
For a limited time, customers who purchase a new WIDIA (Latrobe, PA) solid-carbide drill are eligible for a free drill reconditioning. Select WIDIA, WIDIA-Hanita, and WIDIA-Rubig tools are covered under the program. For more information on the offer, or to take a look at WIDIA’s new 800-page Solid Endmills and Holemaking Master Catalog , visit www.
The BANTAM Mini Compression Springs from Lee Spring (Brooklyn, NY) are a response to the need for miniature stock springs that combine strength and corrosion resistance. The springs start at a wire diameter of 0.004”, slightly thicker than a human hair, and range up to 0.
COE Press Equipment (Sterling Heights, MI) has upgraded its ServoMaster Series Roll Feeds with the new ServoMaster 3 Controller based on an integrated Yaskawa MP940 servo drive and motion control package. Other benefits of the ServoMaster 3 include a 500-job memory function, S-curve acceleration for improved accuracy, and 24 I/O ports.
Balluff (Florence, KY) is now offering its mid-sized block style photoelectric sensor, the BOS 23K, which features the conventional sensing modes of diffuse, retro-reflective, and thru-beam. In addition, the BOS 23K also includes background suppression sensors. Other features include: Long sensing ranges for extended sensing ability.
Advance Lifts, Inc. (Winnebago, IL) announces the Instant Dock 6568 as the newest addition to its complete line of dock lifts. The new system uses all tubular legs for maximum rigidity, and also offers stainless steel, galvanized, FDA epoxy, and enamel finishes to fit the customer’s needs.
The Saflex 3000 from NLB Corp. (Wixom, MI) is a semi-automated water jet system that cleans tube bundles more productively than manual methods and has wireless remote controls that let the operator stand clear of the action. The system can clean three tubes at once, on both the in and out stroke.
Herkules Equipment Corporation (Walled Lake, MI) has designed and built a new Scissor lift Table that tilts and rotates, which was requested for an application that raises, spins, and tilts large containers during the production process to improve ergonomic conditions for workers.
Henkel Corporation (Rocky Hill, CT) has introduced two new Loctite threadlockers formulated to withstand consistent operating temperatures up to 360°F. The new products tolerate the oils and lubricants typically found on “as received” threaded fasteners, and will also cure on plated, aluminum, stainless, and chromated fasteners without primers.
Van Air Systems (Lake City, PA) now offers the Prep40, a complete package in portable compressed air drying. All Prep40 models are designed for applications needing mobility and dew points down to -40 or -100°F. Typical applications include pipeline drying or critical sandblast and painting operations.
The Bondhus Corporation (Monticello, MN) introduces a full line of high quality insulated tools through its German marketing partner, FELO. The screwdrivers, bit drivers, and pliers are tested and certified to comply with all critical safety standards, including insulation safety testing at 10,000 volts.
The Baghouse controller from FilterSense (Beverly, MA) features DeviceNet communications for integration with Allen-Bradley PLCs. The B-PAC series of Baghouse analyzers and controllers feature advanced intelligence, such as the ability to instantly detect and locate failed solenoids and filter leaks.
TURCK (Minneapolis, MN) introduces the new LI-Q25 series linear position sensors, which replace magnetostrictive and potentiometer devices to deliver precise measurements in metal processors, rolling mills, or injection molding machines. The LI-Q25 sensors do not require a magnetic positioning device, so they are unaffected by metal debris.
RIDGID (Orlando, FL) has launched RIDGIDConnect, an online business tool designed for service professionals to securely share and store job site information via a computer, laptop, or smart phone. The online suite can store job site photos or videos, job reports, maintenance records, customer lists, and other files needed for recordkeeping.
LORD Corporation (Cary, NC) has produced a new aqueous primer and covercoat adhesive for bonding during vulcanization to metal, the Chemlok 8212, which is designed for use with the Chemlok 8008 Primer. The primer increases environmental resistance for the bonded assembly and adhesion to the substrate—LORD’s bonding solution works on cold rolled steel, phosphatized steel, and aluminum.
The ED210 TIME CLOCK from Computerwise, Inc. (Olathe, KS) is a large format, wall-mounted digital time display with 4” high digits. The self-contained time-of-day clock can be periodically synchronized with a designated SNTP time server located on your local network.