Infrared Industries Inc. (Hayward, CA) announces the new Automated Programmable Calibration tool that reduces the service, maintenance, and labor costs for CEMS gas monitoring. The calibration is offered on the Model IR8400D, an explosion-proof NEMA7 IR gas analyzer that is approved for hazardous areas.
Reid Supply (Muskegon, MI) has added the Dickies family clothing line, in addition to other safety products, to its online offerings at www.reidsupply.com . Reid offers a selection of work pants and shirts, in addition to garments such as denim jeans, bib overalls, shorts, high-visibility apparel, jackets, and insulated apparel in a variety of colors.
Sun Technologies (Blomfield Hills, MI) has developed the Mini Floor & Pallet, which is a 2’ x 4’ x 2’ Polypropylene riser platform. The pallet holds up to 1,000 pounds, yet weighs only 8.5 pounds. In addition, the sections can be connected by the length or the width with clips, which are included.
The Tel-Tru Manufacturing Company (Rochester, NY) has expanded its Silicon Glass Fused Sensor Series of pressure transmitters. The P621 sanitary model features a single-piece 316L stainless steel sensing element with a high-output silicon glass fused strain gauge. This combination maximizes cycle life even in the presence of pressure spikes, vibration, and aggressive fluid media.
Gorbel Inc. (Fishers, NY) has expanded its line of G-Force Intelligent Lifting Devices to include the new G-Jib, a redesign of an enclosed track workstation jib crane. The G-Jib utilizes an industrial processor-controlled servo drive system to deliver unmatched lifting precision and speed.
From Detcon (The Woodlands, TX) comes the Model 700 gas detection sensors, which now include wireless technology as an integration option, in addition to standard 4-20mA analog and Modbus RS-485 outputs. The Model 700 is designed to work with the Model RXT-300 wireless gas detection system, which is a wireless Modbus replacement and links one master to one or more slaves.
Omron (Fremont, CA) introduces the G9SX-LM Low-speed Safety Monitoring Unit, which consists of two proximity sensors and a G9SX safety controller with fault diagnostics, to monitor motor rotation speed and facilitate safe machine maintenance. The G9SX-LM allows an operator to access the machine for maintenance work while it is running at a safe, maximum threshold of 10 Hz.
EXAIR’s (Cincinnati, OH) new Large Super Air Nozzle has been engineered to maximize entrained airflow and force while reducing compressed air use and noise. The design directs air to a single point of convergence, delivering 23 pounds of blowing force when mounted 12” from the target.
The Hybrid Systems from Shure (Washington, MO) can be customized to numerous configurations according to customer specification, with increased under-bench storage, making them ideal for an existing facility in need of remodeling. The workbench systems are offered in 4’, 5’, 6’, 8’, and 10’ lengths to accommodate different configurations.
Blackmer (Grand Rapids, MI) announces that its XLW Series of sliding vane pumps have been designed to handle liquids with suspended particles up to 250 microns and 25 percent concentrations, such as oxide primers, inks, paints, and adhesives. With hardened ductile iron materials, the XLW pumps can easily handle a variety of abrasive fluids when outfitted with O-rings, mechanical seals, relief valves, springs, and rotors.
The HurtSpot magnetic body-diagram whiteboard from Magnatag (Macedon, NY) shows the places of common injuries and provides a visual representation of the number of injuries better than regular reports, according to the company. By identifying the parts of the body where injuries occur, along with the number of occurrences, the HurtSpot can call attention to accident patterns, making workers more aware and careful.
Allegro Industries (Garden Grove, CA) now offers a variety of ergonomic supports to prevent back injury, carpal tunnel syndrome, and other joint and muscular stresses. Allegro addresses the serious problem of Carpal Tunnel Syndrome (CTS) with six different wrist supports, with one designed to help maintain a neutral position at he wrist while allowing full movement of the hand and fingers.
The Series 4600 2-way pilot operated diaphragm solenoid valves from Spartan Scientific (Boardman, OH) are now offered with an adjustable metering handle to restrict or manually shut off media flow. In addition, the media and pilot can be separated to extend the life of the valve by keeping corrosive material out of the pilot section.
Sioux Corporation (Beresford, SD) has introduced the new E-Series All-Electric line of pressure washers and steam cleaner, with a compact, portable, and 100 percent all-electric design. According to the company, the E-Series is ideal for cleaning, disinfecting, material handling equipment, and more, in a variety of industrial applications.
The Vibro-Curb from the Thybar Corporation (Addition, IL) has integral vibration-dampening spring isolators for mounting with rooftop HVAC units, allowing roofing to be completed after HVAC installation without disturbing the unit. In addition, the 9” counter-flashing provides a weather seal while permitting easy access to the isolators, which provide a minimum of 90 percent isolation efficiency.
The Filtered Diffuser from Comfort First Products (Santa Ana, CA) is designed to eliminate drafts from overhead diffusers and reduce the illness and allergies caused by ductwork pollution. The diffuser allows users to adjust the angle the air enters the room on all four sides, helping to eliminate drafts or hot and cold spots.
A new line of continuous-flex, interconnect motor cables are now available from igus (East Providence, RI), harnessed in accordance with leading manufacturers, including Siemens, Rexroth, Fanuc, and Allen Bradley. These interconnects are ideal for continuous-flexing applications in an Energy Chain cable carrier.
Victaulic (Easton, PA) announces the extension of its line of Advanced Groove System (AGS) couplings for faster and easier installation of large-diameter piping systems. Rigid and flexible couplers with AGS technology are now available in sizes up to 60” in diameter.
Stafford (North Reading, MA) has developed the Grip & Go Handle, which is designed to replace a standard socket cap screw in a one-, two-piece, or hinged shaft collar to permit wrench-free adjustment without sacrificing holding power. The handle features a knurled surface for simple hand-tightening, and is ideal for any non-rotary application requiring frequent repositioning along a shaft.
MAG (Sterling Heights, MI) now offers a wide range of CYCLO CUT cutting tools and CYCLO COOL metalworking fluids designed and blended for machining. The tools and fluids can increase material removal rates in titanium structures by as much as 300 percent, according to the company, resulting in faster cycle times, 33 percent cost-per-part reductions, and increased tool life.