Stafford (North Reading, MA) has developed the Grip & Go Handle, which is designed to replace a standard socket cap screw in a one-, two-piece, or hinged shaft collar to permit wrench-free adjustment without sacrificing holding power. The handle features a knurled surface for simple hand-tightening, and is ideal for any non-rotary application requiring frequent repositioning along a shaft.
MAG (Sterling Heights, MI) now offers a wide range of CYCLO CUT cutting tools and CYCLO COOL metalworking fluids designed and blended for machining. The tools and fluids can increase material removal rates in titanium structures by as much as 300 percent, according to the company, resulting in faster cycle times, 33 percent cost-per-part reductions, and increased tool life.
The Enviro checkweigher bench scales from Hardy Instruments (San Diego, CA) meet the needs of food and chemical manufacturers for sanitary electronics that withstand high-pressure, high-temperature washdown environments. The Enviro is made out of 304 stainless steel and features an IP69K-rated instrument, making it easy to clean and sanitize.
GE Intelligent Platorms (Charlottesville, VA) has announced the CT12 6U CompactPCI single board computer, based on the latest 2.53 GHz Intel Core i7 processor technology. The new Intel chip is designed to deliver high performance with low power consumption and heat dissipation, and is future-proof, allowing for further processor upgrades as new chips become available.
The compact Tool Box Kneeler from Bennette Design Group and ErgoPads (Millis, MA) is made of soft, but supportive foam, and helps increase comfort for employees who have to work on their knees. The Kneeler also fits inside most toolboxes, allowing for easy transport and storage, and is made from a black, rugged “closed cell” foam that hides stains and dirt.
The Tensioner, a ready-to-mount tension mechanism from Misumi USA (Schaumburg, IL), helps reduce design and assembly time for end users. The product comes as a fully assembled unit, complete with slotted holes and adjustment screws for easy mounting, installation, and tension control.
Lee Spring (Brooklyn, NY) introduces LeeP Plastic Composite Springs, which combine the strength of metal with the special attributes of high-performing engineered thermoplastics. The springs are fabricated from distinctive formations of Ultem* PEI resins, and are stocked in a variety of standard sizes, each available in a variety of strengths.
General Machine Products Company, Inc. (GMP, Trevose, PA) announces the Heavy Duty Stiff Spine Conduit Cleaners to its line of underground cable placement tools and equipment. The cleaners are designed to remove obstructions like dirt, ash, sand, oxides, and debris from utility conduits.
ASGCO (Wheeling, IL) announces the new Skalper IV blade and E-Z Torques Tensioning System, designed to remove carry-back efficiently. The new blade design, with its horizontal sipes/wear grooves across the entire blade cleaning edge, ensures a sharp cleaning edge throughout the life of the blade.
Creform Corporation (Greer, SC) has built the Extreme Size Car—which can be manufactured in virtually any size—to meet needs in large parts handling. The parts feature an elevated load platform with a solid plastic shelf surface to provide for damage-free handling of sensitive parts.
A new dimmable LED power supply from Foster Transformer (Cincinnati, OH) features short circuit and overload protection, making it ideal for industrial facilities wishing to control the output of LED lighting. Encapsulated in epoxy and housed in a 304 stainless steel enclosure, the power supply is resistant to dirt, moisture, and corrosive elements.
Pinpoint Laser Systems (Peabody, MA) announces a new storage display to be used with the Microgage 2D family of products, enabling the operator to record readings right on the factory floor. The measurement readings can then be uploaded to a laptop PC running the Pinpoint Capture software for analysis, plotting, and storage.
Delta Industrial (Chesterfield, MI) has a range of mezzanine systems designed for both large and small facilities, making them ideal for in-plant offices, storage, industrial platforms, catwalks, and conveyor integration. Features of Delta’s mezzanine systems include: Customer-designed specifications.
Time Mark (Tulsa, OK) announces their new Model 42X Pump Expansion Unit, which can control up to 3 pumps with a 4-20mA input. Alarm inputs for seal failure, over-temp, contactor fail, and a spare (a second seal fail, for example) are available. Configuration for the 42X is completed via a PC through a USB cable, and the software shows current depth, pump status with run time meters, and alarm status.
Tharo Systems (Brunswick, OH) has extended the warranty for its H-400 Series of thermal transfer printers. Effective immediately, the new warranty will cover the H-427 and H-436 printers for two years. In addition, Tharo will warranty the printhead for two years/two million inches for thermal transfer, or 500,000 inches for direct thermal applications.
A new flow conditioner from Westfall Manufacturing (Bristol, RI), the Model 3000, has been designed to achieve a fully-developed velocity profile with minimal head loss (K=0.579). The Model 3000 mounts directly into a piping system and features four leading tabs and four anti-swirl plates that suppress turbulence to produce a developed velocity profile within eight diameters downstream.
Delamo Manufacturing, Inc. (Los Angeles, CA) has introduced the DYNAMO trash can, available in 32 and 44 gallon sizes. The DYNAMO is the first plastic trash can to offer built-in storage for a variety of cleaning tools, including brooms, mops, dust pans, and more. Flexible belts are available to secure the can liner to the top of the can, along with a number of optional extras, such as the DYNAMO dolly.
The TZIDC Digital Positioner from ABB Instrumentation (Warminster, PA) provides low air consumption at a steady rate: 0.015 scfm, regardless of the air supply pressure. The low air consumption means the positioner is more economical, increasing energy savings. The unique design of the TZIDC current-to-pneumatic conversion component can lead to 50 times less air consumption at steady state, according to the company.
The HeatBank mats and cables from EasyHeat (Rosemont, IL) help convert “off-peak” electrical energy into a reservoir of radiant heat stored with a building’s foundation, which can help industrial facilities significantly lower their energy bills. Once stored, the non-drying heat radiates throughout the building during peak energy periods, serving as a cost-effective supplement to standard heating systems, according to the company.
Advanced Machine & Engineering Co. (Rockford, IL) now offers Sitema Safety Catchers from Sitema GmbH, which are clamping devices that mount around shafts to support vertical loads. The catches help decelerate and stop falling loads, preventing personal injury or damage to equipment.