Space-Ray (Charlotte, NC) has expanded its line of energy-efficient, low intensity gas-fired U-tube heaters to 21 different models, with capacities from 40,000 to 250,000 BTU/hour. The heaters are ideal for high air change environments and higher ceiling heights, such as machine or weld shops, maintenance facilities, and more.
Lantech (Brewerton, NY) and Schneider Packaging Equipment introduce the Stack and Wrap Palletizing/Stretch Wrapping Cell, which combines two or more lines into a centralized, automated stretch wrapping station. The palletizing system centers a FANUC robotic arm between two Lantech Q-600 stretch wrappers.
The SMARTY from Keytroller (Tampa, FL) is a compact digital camera recorder that matches video incidents with GPS location and tracking. The SMARTY begins to record when its 3-axis accelerometer senses an impact, fast acceleration, or quick turn. Video, GPS location, and G-force is kept 15 seconds before and 5 seconds after the event and stored on the unit’s onboard memory.
Martin Sprocket & Gear (Arlington, TX) offers a total package in bulk material handling systems and components, including CEMA standard screws, shaftless screws, dragless conveyors, bucket elevators, cone screws, and ribbon screws. Martin’s material handling solutions are ideal for just about every segment of the manufacturing industry, according to the company.
Misumi USA, Inc. (Schaumburg, IL) introduces additions to its lines of Posts, Stands, and Clamps, which can be configured to suit a variety of applications. They are designed to securely mount devices, such as CCD cameras and photoelectric sensors, which are used by machine designers and builders of automated assembly, inspection, and testing systems.
Weidmuller (Richmond, VA) introduces the fourth generation Stripax and Stripax 16 tools for cutting and stripping flexible and solid conductors with PVC insulation, multi-conductors, and thin ribbon cables. The fourth generation Stripax incorporates numerous design changes and ergonomic practical improvements.
The Multi-Spectrum Infrared (MSIR) FL4000H Flame Detector from General Monitors (Lake Forest, CA) now features a new housing for easy installation that simplifies wiring. The new MSIR sensor incorporates neural network technology (NNT) to provide reliable flame monitoring with immunity to false alarms.
Hilti (Tulsa, OK) has announced its most powerful breaker, the TE 1500-AVR, which combines impact energy with low vibration. The TE 1500-AVR is offers 22 foot/lbs of impact energy generated by a 1,800-watt motor that offers up to 1,950 blows per minute to efficiently break up floors, slabs, or foundations.
The Oil Eater 45-gallon water-based parts cleaner from Kafko (Skokie, IL) features a thermostat pre-set to deliver a cleaning temperature of 110°F, which enhances cleaning effectiveness and minimizes liquid waste. 1,000W heaters shorten the heat-up time. The unit is made from heavy-duty high-density polyethylene plastic and industrial-grade pumps with Viton seals.
Northern Iron and Machine (St. Paul, MN) is now offering an expanded line of replacement ladle cups and mounting brackets for most model die casting machines. The cups now come in eleven models with capacities from 0.44 lbs to 33.70 lbs. The replacement cups are heavy-duty, ¼” ductile iron, and have contoured shapes for smooth pouring and resistance to metal build-up.
The ENERGY GUARD from Serco (Carrollton, TX) provides a perimeter seal along the sides and rear hinge of a dock leveler to block dirt, debris, and insects, and most importantly, prevent energy loss. The design seals the gaps between the dock leveler and concrete pit walls up to 9” above the dock.
Altech (Flemington, NJ) offers the ATEX polyamide strain reliefs for cable entries to provide increased safety in explosion-endangered areas by eliminating any potential for arcs, sparks, or hot surfaces. The IP68-rated strain reliefs offer neoprene seals and promote optimized sealing and protection against contaminants.
The new CM25 self-contained, ceiling-mounted air conditioner from MovinCool (Long Beach, CA) offers a high cooling capacity at a lower cost than conventional solutions, such as precision cooling systems. The CM25 was designed specifically for spaces with dense heat loads and small spaces, at only 20” high.
Demag Cranes & Components (Cleveland, OH) is offering the CastMaster crane series, a custom-engineered crane system designed to improve the speed and efficiency for precast and prestressed product manufacturers using the WetCast or DryCast process. The system can result in a throughput improvement up to 20 percent in areas of the manufacturing process, according to the company.
The Advanced Friction Tester from Gardco (Pomano Beach, FL) produces detailed fingerprints of new substrates, coatings, and production samples. These characteristic can be saved and compared at any time, allowing the manufacturer to specify the optimum surface finish for any packaging process.
Continental Fan (Buffalo, NY) announces the TEK Plug Fans, which feature TEK backward curved airfoil wheels. The TEK Impellers combine precision injection molding techniques with modern high-strength plastics to produce a wheel that is stronger than steel, yet half the weight.
The Hyster Company (Greenville, NC) has launched a new series of lift trucks with lifting capacities of 55,000 to 70,000 lbs. The H550-700HD models are ideal for steel manufacturing, loading general cargo, and stacking loaded or unloaded containers. The newly designed models feature the ComforCab II operator compartment, which enhances operator comfort to maximize productivity.
Balmac Inc. (Plain City, OH) offers the Model 4216 Vibration Analyzer with an LED Strobe Light for vibration analysis and dynamic balancing applications. The analyzer is a portable solution for vibration and balancing work with a highly efficient, high-brightness light source.
TECSYS, Inc. (Montreal, Canada) announces the EliteSeries 8 Visual Logistics, which enables customers to streamline putaway, picking and packing, and achieve a high order accuracy. The new version is founded on web-based technology that communicates the “what, when, where, why, and how” of plant logistics.
Han-Kwang USA (Lombard, IL) announces its Model TL 6015, a tube cutting laser system capable of handling 24’ long, 6.5” diameter workpieces. The maximum wall thicknesses are up to ¼” in mild steel and 1/5” in stainless steel. A 2.5KW Panasonic laser and a versatile Siemens 840D CNC controls all function of the machine, alongside Han-Kwangs proprietary “Flex 3D” tube cutting software.