The ENERGY GUARD from Serco (Carrollton, TX) provides a perimeter seal along the sides and rear hinge of a dock leveler to block dirt, debris, and insects, and most importantly, prevent energy loss. The design seals the gaps between the dock leveler and concrete pit walls up to 9” above the dock.
Altech (Flemington, NJ) offers the ATEX polyamide strain reliefs for cable entries to provide increased safety in explosion-endangered areas by eliminating any potential for arcs, sparks, or hot surfaces. The IP68-rated strain reliefs offer neoprene seals and promote optimized sealing and protection against contaminants.
The new CM25 self-contained, ceiling-mounted air conditioner from MovinCool (Long Beach, CA) offers a high cooling capacity at a lower cost than conventional solutions, such as precision cooling systems. The CM25 was designed specifically for spaces with dense heat loads and small spaces, at only 20” high.
Demag Cranes & Components (Cleveland, OH) is offering the CastMaster crane series, a custom-engineered crane system designed to improve the speed and efficiency for precast and prestressed product manufacturers using the WetCast or DryCast process. The system can result in a throughput improvement up to 20 percent in areas of the manufacturing process, according to the company.
The Advanced Friction Tester from Gardco (Pomano Beach, FL) produces detailed fingerprints of new substrates, coatings, and production samples. These characteristic can be saved and compared at any time, allowing the manufacturer to specify the optimum surface finish for any packaging process.
Continental Fan (Buffalo, NY) announces the TEK Plug Fans, which feature TEK backward curved airfoil wheels. The TEK Impellers combine precision injection molding techniques with modern high-strength plastics to produce a wheel that is stronger than steel, yet half the weight.
The Hyster Company (Greenville, NC) has launched a new series of lift trucks with lifting capacities of 55,000 to 70,000 lbs. The H550-700HD models are ideal for steel manufacturing, loading general cargo, and stacking loaded or unloaded containers. The newly designed models feature the ComforCab II operator compartment, which enhances operator comfort to maximize productivity.
Balmac Inc. (Plain City, OH) offers the Model 4216 Vibration Analyzer with an LED Strobe Light for vibration analysis and dynamic balancing applications. The analyzer is a portable solution for vibration and balancing work with a highly efficient, high-brightness light source.
TECSYS, Inc. (Montreal, Canada) announces the EliteSeries 8 Visual Logistics, which enables customers to streamline putaway, picking and packing, and achieve a high order accuracy. The new version is founded on web-based technology that communicates the “what, when, where, why, and how” of plant logistics.
Han-Kwang USA (Lombard, IL) announces its Model TL 6015, a tube cutting laser system capable of handling 24’ long, 6.5” diameter workpieces. The maximum wall thicknesses are up to ¼” in mild steel and 1/5” in stainless steel. A 2.5KW Panasonic laser and a versatile Siemens 840D CNC controls all function of the machine, alongside Han-Kwangs proprietary “Flex 3D” tube cutting software.
Danfoss Drives (Milwaukee, WI) introduces the VLT Low Harmonic Drive, which performs real-time analysis and actively imposes currents, as needed, to ensure the highest quality sine waves from the power supply grid. All VLT drives are individually-configured according to the customer’s specific needs.
Uvex (Smithfield, RI) has launched the Specifix collection of protective eyewear. The collection includes three new styles (VersaPro, PrecisionPro, and ExtremePro), all of which are designed to meet the needs of workers in various industrial facilities. The eyewear comes with Uvex’s Supra-Dura anti-scratch coating.
Hitachi America (Tarrytown, NY) has announced compliance with NSF/ANSI Standard 61-Annex G for their submersible pump motor line-up. The Annex-G standard (Weighted Average Lead Content Evaluation Procedure to a 0.25 Percent Lead Requirement) was developed in response to California’s Low Lead Plumbing Law, which mandates a maximum lead content of 0.
Mercotac Inc. (Carlsbad, CA) announces the Model 215-2K in their line of rotating electrical connectors with a service life that can last over one billion revolutions in many applications. In addition, the connectors are virtually maintenance-free, and transmit electrical power or signals with almost no electrical noise.
Master Magnetics, Inc. (Castle Rock, CO) has introduced a few additions to their line of magnetic sweepers. The permanent magnet assemblies range from 12” to 96” in width, making them ideal for quick removal of hazardous scrap metal debris from warehouses, loading docks, and manufacturing areas.
SIS-TECH (Houston, TX) announces the DIAMOND-SIS automated independent backup (AIB), a standalone safety instrumented system that backs up current process control trip logic and meets the requirements of IEC 61511. The AIB is available in single, dual, and triplicated channel configurations with on-line diagnostics, testing, and maintenance capabilities.
The Edison power distribution line from AutomationDirect (Cumming, GA) now includes the HPB-series open-style power distribution blocks as a convenient way to manage power distribution needs. The distribution blocks are manufactured with tin-plated aluminum connectors suitable for copper conductions, helping maintain a high SCCR rating of 200kA.
RIDGID (Elyria, OH) introduces the Auto-Clean drain cleaning machine for cleaning drain blockages in pipes from ¾” to 1½” in diameter. The machine features a dual-direction AUTOFEED technology, which advances and retrieves the drain-cleaning cable with the push of a lever.
Camfil Farr Air Pollution Control (APC, Jonesboro, AR) has introduced a new pulse-cleaned industrial vacuum that reduces clogs to prevent problems that result from a loss of suction during cleaning. The FarrVac operates without compressed air and may be used for everyday cleanup.
TRI-TRONICS, Inc. (Tampa, FL) has introduced the SMARTEYE ColorWise Sensor that solves most difficult color applications at higher speeds than color cameras or other sensors. The ColorWise is ideal for intricate color sorting or inspection problems, such as high-speed packaging and production lines.