The Supreme 10AOHT-LO adhesive from Master Bond (Hackensack, NJ) is a single-component, no mix, thermally-conductive compound featuring electrical insulation and durability against impact, thermal shock, vibration, and stress fatigue cracking. It meets NASA low outgassing specifications and is formulated to cure at elevated temperatures between 250° and 300°F for 1 hour.
Kadant Johnson Inc. (Three Rivers, MI) has developed a new line of direct steam injection water heaters, which are used to rapidly and accurately heat water and water-based slurries by injecting steam directly into the fluid. Applications include boiler preheating, sanitation and tank cleaning, among others.
Barco (Chicago, IL) has introduced the E-Series air union for air-related manufacturing applications. The E-2 series can handle difficult industrial environments that other rotary units might not, with a nitrotec surface treatment, which increases the wear- and corrosion-resistance.
The Loctite QuickTape 249, from Applied Industrial Technologies (Cleveland, OH), is the first threadlocker in tape form, which allows for easy portability and allocation. The tape offers no leaking, clogging, or mess. Check out the video below to learn more: Or visit www.appliedindustrial.
Precision AirConvey (Newark, DE) has developed a mobile package based on its TrimPAC series of automatic trim systems. By setting the entire TrimPAC system on a steel platform with strong, non-marking casters, the mobile package makes installation of a flexible trim handling system easy.
Bilsing Automation North America (Clinton Township, MI) has announced the availability of its GT30 and GT40 family of pneumatic grippers, which provide cost-effective clamping solutions in metal assembly. According to the company, they are durable enough to exceed a million cycles.
Renishaw (Hoffman Estates, IL) has developed the “lean design” XL-80 system for laser interferometer calibration, which allows a 4x faster slew rate, 10x higher dynamic data capture rate, and a smaller package. The XL-80 brings nanometer-level motion analysis to advanced machine tools, robots, and assembly systems.
The AMI300 Indoor Air Quality monitor from E Instruments (Langhorne, PA) is ideal for any IAQ application, according to the company. The monitor can detect CO, CO2, temperature, humidity, air flow (vane and hot wire), air velocity, and more. In addition, the AMI300 can be used with a variety of temperature, humidity, and air flow probes, which can also be wireless.
The new Elevation Station adjustable-height workstation from Southworth Products Corp. (Portland, ME) allows the user to raise or lower the tabletop, reducing fatigue and back strain. The unit features a foot pedal at each end of the base to initiate a smooth, precise transition to any height between 24” to 40”.
Seika Machinery, Inc. (Torrance, CA) announces that their Solder Paste Recycling (SPR) unit is able to reduce the amount of waste material to less than 10 percent of current volumes by recycling solder paste. The SPR allows companies to move forward with green initiatives as well as save by recycling leftover solder material for reuse in another process, according to the company.
Thybar (Addison, IL) introduces the Retro-mate, a cost-effective method of replacing rooftop HVACs. The old unit is removed, and then the Retro-mate is installed on top of the existing curb to adapt it to the new rooftop unit. Existing ductwork can be utilized for even more savings, according to the manufacturer.
Strong Hand Tools (Pico Rivera, CA) designed the 90° Corner Magnet for holding workpeices from the outside, leaving unobstructed space inside your workpiece for welding. The boomerang-shaped magnet has a height of just 3-1/2”, making it compact enough to take anywhere in the shop.
Balluff (Florence, KY) has developed the BunderProx, a rugged, “self-bunkering” M18 inductive proximity sensor designed to survive longer in welding applications without external protection. The BunkerProx has a strong, thick housing that boosts the ability to withstand repeated mechanical impact, and also acts as an intermittent heat sink to shield the electronics from intense heat.
The Model DM-100 SmartWireless gas detection sensors from Detcon (The Woodlands, TX) are low-power devices designed to detect and continuously monitor a wide range of toxic gases. All sensors provide a 2-wire loop powered 4-20 milliamp current signal equivalent to the range of the detected concentration of gas.
Custom Service & Design, Inc. (Auburn Mills, MI) offers a line of filtration products and solutions through its standard vessel line, which includes standard bags, pleated bags, stainless steel strainers, baskets, and elements. The OEM/07A Bag Vessel design is unique to the company, and offers good fluid flow and low velocities, not to mention a basket seat that ensures a proper fit for virtually any industry-standard filter bag.
The SmartBanks from Maysteel (Menomonee Falls, WI) for Low Voltage Power Factor Correction provide energy efficiency and savings by eliminating KVA and KVAR peaks that drive up energy bills. They can be used near motors, transformers, inductive heating, and arc welding generators.
The AMD-035 SuperStar Membrane Dryer from LA-MAN Corporation (Mazeppa, MN) provides clean and dry compressed air designed with the automotive industry in mind, but can be used wherever refrigerated dryers may be too large. The dryer lowers the dew point by continuously removing water vapor, with drops up to 20°F, making it ideal for spray booth applications.
RIDGID (Elyria, OH) introduces the SeeSnake LT1000 laptop interface, which provides a flexible way to digitally record, monitor, and manage drain footage when paired with a RIDGID SeeSnake reel and the SeeSnake HQ software suite. The laptop interface allows users to complete tasks without transferring data between field devices and a PC, which reduces the overall time spent on the task.
The High Volume Low Speed (HVLS) fans from Kelley Company (Carrollton, TX) can move a large column of air slowly, creating a horizontal floor jet that consistently circulates air in large spaces. This allows facilities to raise thermostats in the summer without sacrificing worker comfort, and can help contribute to LEED Certification credits.
CASS Polymers (Oklahoma City, OK) offer the PolyMax Industrial Plant Floor Systems, which are able to withstand extreme temperature changes and thermal shock, with a similar coefficient of expansion compared to concrete. The system is available in slip-resistant profile for wet environments, and is installed in 3/16” or greater thicknesses.