Advertisement
Product Releases
Subscribe to IMPO Magazine Product Releases

Cooler Summers, Warmer Winters

May 18, 2010 7:13 am

Kelley Company (Carrollton, TX) has launched a new High Volume Low Speed (HVLS) Fan series, designed to provide facilities with an energy-efficient and cost-effective cooling and heating solution. The fans create a horizontal floor jet that consistently circulates air in large spaces, which provides an 8-10 degree cooling sensation.

TOPICS:

Betting Your Safety With A COBRA

May 18, 2010 7:12 am

The COBRA LIFELINK Single-Man cart from Garlock Safety Systems (Plymouth, MN) is a mobile anchorage system that one or two people can tie-off to when they’re on an elevated job site by providing fall arrest for 1 worker and fall restraint for a second. The modular design fits almost anywhere.

TOPICS:

Don't Choose Between Welded And Mechanical

May 18, 2010 7:11 am

The Interna-Rail handrail system from Hollaender Manufacturing (Cincinnati, OH) is an in-line fitting based system designed to combine the look of a welded rail with all the benefits of a mechanical system. The system can be designed to meet any building code. Its fittings are manufactured from 6063-T6 aluminum alloy and the pipe is a combination of 6005-T5 and 6063-T6 alloys.

TOPICS:
Advertisement

A Pump Regulator That Purrs

May 18, 2010 7:09 am IMPO

Cat Pumps (Minneapolis, MN) has developed the new 7375 and 7376 pressure regulators, which are designed to meet the demands of industrial applications where continuous-duty, dependable performance is required. The high flow regulators set system pressure, by-pass unused liquid without interrupting system operation, and protect the pump from exceeding the set system pressure.

TOPICS:

Measure Conductivity Anywhere

May 17, 2010 6:29 am

The Models S10 and S17 Universal Toroidal Conductivity Sensors from Electro-Chemical Devices, Inc. (ECD, Irvine, CA) feature a standard measurement range from 50 to 1,000 mS. The inductive sensors are built with the toroids in line with the axis of the sensor instead of perpendicular to the axis as is commonly employed.

TOPICS:

Go Rubber For Performance

May 17, 2010 6:28 am

Robinson Rubber Products (Minneapolis, MN) has a new tool call the Molded Rubber Component Design Specification Checklist, which can be filled in online. A Robinson Rubber Engineer will evaluate your part requirements and provide a free, no-obligation way to investigate potential new methods to improve your product’s performance, life, weight, features, and assembly costs.

TOPICS:

Long-Lasting Pumps

May 17, 2010 6:28 am

Nikkiso-KSB GmbH (Bruchköbel, Germany) has launched a new pump type series to meet the stringent requirements of API 685. The series comprimises of 27 sizes and is designed for a minimum of 20 years of operation under heavy-duty conditions. The low-noise motors are available up to 132 kW and are fitted with a corrosion-resistant and energy-efficient chrome nickel molybdenum alloy.

TOPICS:

All-In-One Machining Center

May 17, 2010 6:27 am

The new SPECHT 500/630 horizonal machining center from MAG Industrial Automation Systems (Sterling Heights, MI) offers modularity with six spindle options, four control options, and three 5-axis configurations to suit various needs. The machine is engineered around a box-in-box, moving-table design for low-inertia responsiveness that delivers accuracies up to 4 microns with 260-Nm full-torque cuts.

TOPICS:
Advertisement

Do Your Part—Recycle

May 14, 2010 8:12 am

Shure Manufacturing (Washington, MO) offers new Recycle Cabinets, which have a large swing-out door to reveal a 40-gallon plastic receptacle with dolly for recyclable materials. The steel door can be closed to conceal unsightly containers, making the customer’s service area look clean and organized, while helping the environment.

TOPICS:

Go Explosion-Free

May 14, 2010 8:11 am

Fike (Blue Springs, MO) has introduced a new brand for its entire line of explosion protection products. The EPIC brand includes explosion venting, flameless venting, explosion isolation (chemical and mechanical), explosion suppression, and more. The EPIC name stands for “Explosion Protection Integrated Components,” and has changed the branding on other model names, so customers are encouraged to visit www.

TOPICS:

Labeling For Safety

May 14, 2010 8:10 am IMPO

Tyco Electronics (Harrisburg, PA) has announced the North American launch of Pressure-Sensitive Adhesive (PSA) labels for safety, warning, and electrical box identification. The labels have a permanent adhesion and are protected by a lamination that offers resistance to abrasions, fluids, dirt, and stains.

TOPICS:

Learn Hydraulics In-And-Out

May 14, 2010 8:10 am IMPO

American Technical Publishers (Orland Park, IL) has introduced a new textbook specifically designed for teaching the design, application, and maintenance of hydraulic and pneumatic systems. Fluid Power Systems addresses fluid power systems, components, and devices, and focuses on troubleshooting techniques by introducing descriptions, operational procedures, common applications, and operating characteristics.

TOPICS:

Lifting Is Just Dandy

May 13, 2010 6:23 am

Southworth Products Corp. (Portland, ME) introduces the new Dandy Lift with a battery-powered lift mechanism. The Powered Dandy Lift is a clean and quiet product for transporting, lifting, and positioning loads in industrial environments. A 24-volt battery aids in lifting and lowering, and the lift comes in five models with capacities from 220 to 500 lbs.

TOPICS:

Manufacturing On Your iPhone

May 13, 2010 6:22 am

The Mechanical Engineering Tools of the Trade iPhone app from Martin Sprocket & Gear (Arlington, TX) allows for accessible power transmission information. The application includes 200 key formulas and conversions used by industrial professions, making notepads and calculators obsolete.

TOPICS:

When It's Good To Be Square

May 13, 2010 6:21 am

IRISS, Inc. (Bradenton, FL) has expanded its product line of Custom Application Products (CAP) to include a Square Infrared Window capable of passing durability and impact requirements. IRISS custom-builds the square windows because round windows sometimes do not provide complete coverage, or because so many windows are required they become cost prohibitive to the customer.

TOPICS:

Keep Your Documents Safe

May 11, 2010 8:35 am

RNR Plastics, Inc. (Raynham, MA) has developed a clear vinyl pouch that allows technicians, mechanics, and maintenance personnel to keep important documents nearby while protecting them from oil spills or other contaminants. The Critical Documents pouch is made from clear PVC and is ideal for instructions, schematics, production schedules, maintenance logs, or other documents that need to be used close to the work.

TOPICS:

Protect Fingers With Light

May 11, 2010 8:35 am IMPO

The PSENopt safety light curtains from Pilz Automation Safety (Canton, MI) can be used for finger, and body protection by safeguarding danger zones whenever a production process requires active yet safe access. According to the company, the PSENopt barriers comply with stringent industry standards.

TOPICS:

All The Bubble Wrap You Want

May 11, 2010 8:34 am IMPO

The NewAir I.B. Express system from Sealed Air (Saddle Brook, NJ) is the newest inflatable cushioning system that quickly creates Barrier Bubble material for cushioning, or blocking and bracing applications. The I.B. Express allows operators to make cushions with widths of 12” and 24”, plus the availability of options for film strength.

TOPICS:

From The Kitchen To The Plant Floor

May 11, 2010 8:34 am

Rubbermaid Commercial Products (RCP, Winchester, VA) introduces a new line of heavy-duty carts and trucks, which consists of 55 products made out of Rubbermaid’s Duramold structural resin and metal composite structure. According to RCP, the Duramold compound has been tested to hold and transport up to 2,500 pounds of weigh load capacity.

TOPICS:

Long-Term Peristaltic Pumps

May 10, 2010 7:29 am IMPO

Airtec Products Corp. (Fall River, MA) now offers the Aspen Pumps’ Purple Series of peristaltic condensate pump kits for minisplit air conditioners. These pumps are ideal in applications where excess dirt or oil create blockages in conventional minisplit condensate pumps.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading